Usually lots of foxes. In SA so everything is pretty rust free.
Let me know if your seeking something in particular.
I've got plenty of Fox parts, but if you see a good set of Volvo 240 tail lights like these...
(http://www.turbochuck.com/images/Volvo/newshoes_2_s.jpg)
Mine are falling apart.
:hick:
C3/C5 Non-OD Auto Floor Shifter + Linkage (Dont need handle or trim piece)
Un-Damaged "T-Bird Elan" Trunk Lid Liner
Cougar Eliminator Hood Scoop
SN-95 Cobra Front Calipers
I dont ask for much do I? ;)
If you find a tripminder for cheap, I'm interested. Thanks.
inner seat buckle sleeves.
un-rusted 5.0 fuel lines that connect between the vinyl lines under the car, and the chrome lines under the hood. They run along the frame behind the fender.
Trunk mat from the factory and an EFI 5.0 O2 harness..
Both shoulder-belt hooks from the top of the seats......gray
cd cartridge from the console of an Expedition. its for a 6 cd changer.
I have a 86 Thunderbird trunk liner sitting in my garage in pretty nice condition........whats a fair price for it? I imagine shipping wont be cheap from NY to WA either......PM me or call me 516-978-5988 David
Holly crud thats alot of requests. Ill punch them into my phone (where I keep my lists) and see what I find.
If you find mine.... cut the lines so there's some vinyl to splice them to mine... the top part should dis-connect from the chrome lines. unless the chrome lines are mint, then I will take them too if you get them
I apologize guys, but I couldn't make it on account of the weather. It rained pretty much all day sat, and since SA has no drainage, it turns he JY into a mud pit of epic proportions (ask me how I know).
I go pretty frequently and will keep an eye out for said items.
Daminic - should have told me about 4 weeks ago. I had a set that came with a fuel rail I picked from the yard and just tossed.
-Z
Oh, man.................
Jerry are you needing the chrome lines that come up the front of the engine? If so I might have them :D
Thanks, I got those. Just need the ones on the frame
These, minus the splices.
(http://i233.photobucket.com/albums/ee79/daminc/parts%20bird/IMG_5728.jpg)
Oh man Jerry it might be time to just make them yourself lol.
If those are the same lines for the v6, which logically they should be, then I will see if I can get them when I go back out. There's only a v6 car and a tc in the yard.
If I get them used, they have to be rustfree.....My last choice is going straight vinyl, and deleting the hard lines on the frame. I really don't want to make them and try to connect them to the vinyl lines on each end. If I go with making them, then I will use stainless front to back.
Ooooh, shiny. Stainless;)
I'll let you know if I come across any.
Ok
The lines are different in regards to V8 vs V6, at least as far as where they enter the engine bay..the 3.8 lines come through the round hole, while the V8 lines come from under the passenger side of the wheelwell. This is on '88 cars, I expect the '87 V8 to be the same, but the '87 V6 will probably be different because of the CFI system...
Jerry, there's an '88 V8 Cougar (actually, there's 2) at the pick n pull...I am going to try to make it back there this coming sunday...if so, I'll look at those lines for you.
Those lines usually fare pretty good up here, if you can't find any.
ok, Vinnie said he's looking on Wed. if he doesn't find any, you guys are up next, and I'll start a new thread for it in the wanted section.
I'm gonna look anyway, since I might need a full set of V8 lines myself...if they're not too bad on price, I'll grab the others as well.
Ya never know, I've had two Birds in flames...
I need a Mark8 E-Fan also. ;)
Get a Taurus fan. They flow as well, and are VERY plentiful and cheap at any yard.
I look for the mark fan every time I go, they are always pinched long before I get there. They have TONS of 3.8 and 3.0 Taurus fans though.
My Taurus fans cools great....probably a little too good.LOL. The needle never makes it above 1/3 of the gauge.....even when it hit 117 degrees.
will a fan out of a grand prix work? I got one of those