Any chance that 5.0L Mustang Shorty Headers would fit my '83 5.0L T-Bird?
Or if anybody can explain any mods that I would have to make in order to make them work, that would be appreciated.
They should bolt right on to the engine , you will have to use a mustang H or X pipe though,
Sometimes there has to be slight modification to column shifter linkage , but that entirely depends on each car as each one is unique
I went out o my way to drill out the lower stud on the drivers side header to the h pipe because of the linkage, but it would have been 100x easier to just unbolt the linkage for two minutes while I bolted the h pipe on.
They will work. Just take your time, and if you hit a snag, take a clear pic of the interference and post it here. Someone has overcome whatever you run into. Dont try to rush it.