Print Page - Tubular K-member

Title: Tubular K-member
Post by: Clayton on January 15, 2011, 12:02:51 AM

Needs me some feedback on them. Ive got a granatelli kit in the works for the 87 tbird I was wondering who all had the tubular kmembers and if they had any fitment issues or any guidence for when I start tackling the swap.

Input is appreciated

Clayton

Title: Tubular K-member
Post by: Bruce M on January 15, 2011, 07:47:24 AM

There are a few guy here that have them, I think you need spacers where it mounts to the lower part of the sub-frame. I could be wrong, I dont have one, but I did reseach it cause I was thinking about it also.

Title: Tubular K-member
Post by: Beau on January 15, 2011, 04:04:49 PM

Here's some info here (http://"http://www.foxtbirdcougarforums.com/showthread.php?10113-K-member...&highlight=tubular") that may help ya out :-)

Title: Tubular K-member
Post by: SirChirpAlot on January 15, 2011, 05:49:06 PM

I made my own K member and arms. But even using a stock one as a jig i still ended up using spacers.
Most K members i have seen have been 95% fit with a little tinkering.

Title: Tubular K-member
Post by: Clayton on January 15, 2011, 06:57:21 PM

thats cool. i just had a few questions. i knew they didnt fit quite right and had to be trued up.

thanks for the input

Title: Tubular K-member
Post by: SirChirpAlot on January 15, 2011, 07:28:27 PM

That is why i made my own K member.

Fox T-Bird/Cougar Forums

Technical => Suspension/Steering => Topic started by: Clayton on January 15, 2011, 12:02:51 AM