Taken from the whole car for sale thread (couldn't edit title)
I'm finishing pulling the rest of the parts off this probably this week. If anybody wants ANYTHING off it, let me know. not much good stuff on it,
1 - pass side door moulding
1 - 1/4 moulding
all 3 rear windows for 83-86
keeping windshield and door glass
red quarter inside panels
rear bumper cover
taillights
sill plastic panels
still has auto shifter (not great by any means, but it still works, but moves hard)
anything else anybody can think of. Tired of looking at it, and the time has come for it to go byebye!
1986 tbird tc
seats and carpets intact (carpet great! Seats pretty faded and drivers seat has gangster lean to it)
no dash, but could be thrown in(not sure if I'm using it or not in the new car)
Good 3.73 7.5" axle - might get pulled and swapped if I cant find an 8.8 axle. Other car has 2.75 axle in it :suicide:
Missing parts:
Header panel/front bumper
mirrors
engine - auto trans can go with it
steering column - column out of other car will be included(no steering wheel)
Parts that are taken off, but can be included if need be
driveshaft
wiring harness
hood
hood hinges
wiper motor
dash
center console
door panels
door handles/locks/trunk lock
(http://i26.photobucket.com/albums/c146/Fordguy545/autox%20tbird%20project/SNV31359.jpg)
(http://i26.photobucket.com/albums/c146/Fordguy545/autox%20tbird%20project/SNV31360.jpg)
(http://i26.photobucket.com/albums/c146/Fordguy545/autox%20tbird%20project/SNV31361.jpg)
(http://i26.photobucket.com/albums/c146/Fordguy545/autox%20tbird%20project/SNV31362.jpg)
(http://i26.photobucket.com/albums/c146/Fordguy545/autox%20tbird%20project/SNV31365.jpg)
(http://i26.photobucket.com/albums/c146/Fordguy545/autox%20tbird%20project/SNV31366.jpg)
(http://i26.photobucket.com/albums/c146/Fordguy545/autox%20tbird%20project/SNV31526.jpg)
(http://i26.photobucket.com/albums/c146/Fordguy545/autox%20tbird%20project/SNV31525.jpg)
(http://i26.photobucket.com/albums/c146/Fordguy545/autox%20tbird%20project/SNV31520.jpg)
Located in Oak Harbor, OH.
pass side door molding
quarter molding
tail lights
shifter with cable
how much for this shipped to 21050?
Off topic... How many coils were broken on the front springs lol?
Id take the lower control arms,if they are same dimensions as mustang ones!!!
I just noticed that LP truck in Backround!!! Ouch,i drive one, guess i better becareful!!! Hope i didnt ruin your thread my bad!!!
fronts or rears? not sure on this year. I'm thinking they are the short foxbody ones. I know 87/88's had the longer arms
Fronts would be sweet!!! I actually only need the LH one. $$$ adress,payment options
I will take pics tomorrow of whats left on the car. Got the tail lights, rear bumper cover, and trunk side storage compartment out today if anybodys interested in that stuff.
So what superhero used to own that car with that paint scheme?
I'll take the front and rear window trim. I need new horns as well. PM me.
how it sets now
keeping rack
(http://i26.photobucket.com/albums/c146/Fordguy545/SAM_0022.jpg)
(http://i26.photobucket.com/albums/c146/Fordguy545/SAM_0023.jpg)
(http://i26.photobucket.com/albums/c146/Fordguy545/SAM_0024.jpg)
(http://i26.photobucket.com/albums/c146/Fordguy545/SAM_0025.jpg)
(http://i26.photobucket.com/albums/c146/Fordguy545/SAM_0026.jpg)
(http://i26.photobucket.com/albums/c146/Fordguy545/SAM_0027.jpg)
(http://i26.photobucket.com/albums/c146/Fordguy545/SAM_0028.jpg)
(http://i26.photobucket.com/albums/c146/Fordguy545/SAM_0030.jpg)
(http://i26.photobucket.com/albums/c146/Fordguy545/SAM_0031.jpg)
(http://i26.photobucket.com/albums/c146/Fordguy545/SAM_0032.jpg)
(http://i26.photobucket.com/albums/c146/Fordguy545/SAM_0033.jpg)
(http://i26.photobucket.com/albums/c146/Fordguy545/SAM_0034.jpg)
(http://i26.photobucket.com/albums/c146/Fordguy545/SAM_0035.jpg)
(http://i26.photobucket.com/albums/c146/Fordguy545/SAM_0036.jpg)
(http://i26.photobucket.com/albums/c146/Fordguy545/SAM_0037.jpg)
going to s tomorrow at lunch. I'll pull the rest of the good trunk stuff before loading. Everything else of possible value got pulled already. And everything people asked for. I will be getting pics and finish getting stuff rounded up and people contacted.
If you could pull whats left of the shifter and maybe cables/linkages before you s it that would be cool.
No worries if not~I can prolly come up with stuff at the JY.
got shifter stuff pulled
if you still have it, i need a small 4"x4" section of the driver side rear quarter cut out and sent to me, i can send you a pic, its right in front of the tail light on the body line
sorry, cars gone. got picked up this morning
Is the passenger seat on an electric track, if so, will you sell?
It was, but cars gone. Think I may have another set of tracks out of the 87 I'm building that won't be used and I know they work.
What would you sell the track and harness for?
$35? Not sure about the harness. All the stuff on the track is intact, but how much do you need for the rest of it. It may take a while to dig through all of the wiring I took out of that car to get it, lol.
I am not too sure myself. I would like the wiring from the seat to the seat switch in the center console, anything beyond that would be a bonus. Do you have a paypal account?
Fordguy545@hotmail.com is my paypal. I'll try and get everybodys stuff ready to be shipped or shipped by the end of the week!
Is 35 for the electric seat track and wiring only, or does it also cover shipping to TX 78501?
It'll cover shipping
Sold and payment sent. My car thanks you for the upgrade!