Fox T-Bird/Cougar Forums

Technical => Body/Appearance/Interior => Topic started by: V8Demon on September 06, 2010, 09:53:03 AM

Title: Illuminated Lock cylinders......In Black perhaps?
Post by: V8Demon on September 06, 2010, 09:53:03 AM
In my never-ending quest to remove all exterior chrome from my car(save for ONE new emblem :evilgrin: ), I have come to one last part that I require some assistance with......


The car has illuminated door lock cylinders.  My goal is to keep a set of the same type on the car.  I have new handles and a black trunk lock cylinder all ready to go, I have the issue solved with my keyless entry as well, however I am at a crossroad with the door cylinders.  I was planning on painting the cylinder covers a satin black to match the rest of the un-chromed pieces and the hood scoops.  It dawned on me at work that the regular lock cylinders came in black, but what about the illuminated type?

Perhaps a usable substitute from another ford vehicle?

Perusing the coolcats parts listing gives no part # that I could find for the illuminated locks so I'm in the dark......Any help would be appreciated. ;)
Title: Illuminated Lock cylinders......In Black perhaps?
Post by: EricCoolCats on September 06, 2010, 10:19:16 AM
Yep, they were available on 1987-88 Turbo Coupes and at least the 1988 Thunderbird Sport (not sure about a 1987 Sport). I don't have the part numbers for illuminated locks.

They'd be the same finish as the smoked trunk lock cylinder that you have. The problem is, obviously you'd need to get the lock cylinders re-keyed to your ignition lock. Or have your ignition lock rekeyed to the lock cylinders, whichever.
Title: Illuminated Lock cylinders......In Black perhaps?
Post by: CoogarXR on September 06, 2010, 10:24:27 AM
I have a set from my old LTD LX that I sped, for some reason I was thinking they might be black... They are buried in my garage right now, but if I come across them I'll let you know :mullet:
Title: Illuminated Lock cylinders......In Black perhaps?
Post by: V8Demon on September 06, 2010, 10:29:23 AM
Thanks Eric ;)

Coogar XR, 86-88 door lock cylinders were different from the earlier versions which I would guess is what the LTD's would be.

For reference click here:  http://www.foxtbirdcougarforums.com/showthread.php?t=14758&highlight=cylinder

If they are indeed the type I need; PM me ;)
Title: Illuminated Lock cylinders......In Black perhaps?
Post by: EricCoolCats on September 06, 2010, 11:05:36 AM
Paul, almost forgot...those darker locks were on the 1987 20th Anniversary Cougar also:

"Black greenhouse moldings, door handles, lock cylinders and antenna"
Title: Illuminated Lock cylinders......In Black perhaps?
Post by: hypostang on September 06, 2010, 11:10:34 AM
And Mark VII LSC SE FROM 90-92
Title: Illuminated Lock cylinders......In Black perhaps?
Post by: hwy73 on September 06, 2010, 01:54:57 PM
Add 88 XR-7's with the illuminated entry system
Title: Illuminated Lock cylinders......In Black perhaps?
Post by: Beau on September 06, 2010, 02:55:23 PM
Seems like I took some apart once, the outer part (either chrome or smoked) was held on by little tabs that bent over the illuminated piece.

Just can't remember if it was on my white car, or some other vehicle all together...

I don't know how feasible it would be swap those, since bending the tabs a few times would cause metal fatigue, etc.

Just a thought though.
Title: Illuminated Lock cylinders......In Black perhaps?
Post by: Watchdevil on September 06, 2010, 09:46:26 PM
Quote from: ThunderbirdSport302;334850
Seems like I took some apart once, the outer part (either chrome or smoked) was held on by little tabs that bent over the illuminated piece.

Just can't remember if it was on my white car, or some other vehicle all together...

I don't know how feasible it would be swap those, since bending the tabs a few times would cause metal fatigue, etc.

Just a thought though.


I would just paint the bright housings black and be done with it.

I have a set of these illuminated locks thinking I might use them, but then I realized what would be the point since I installed remote keyless entry.
Title: Illuminated Lock cylinders......In Black perhaps?
Post by: V8Demon on September 07, 2010, 05:08:26 PM
Quote
I don't know how feasible it would be swap those, since bending the tabs a few times would cause metal fatigue, etc.

Exactly why I want a set of factory black.
Title: Illuminated Lock cylinders......In Black perhaps?
Post by: jleews6 on September 08, 2010, 04:27:05 PM
This is an off topic question in a way but when do the lights come on? Might have to use these for my tbird/mustang project but im not sure yet.
Title: Illuminated Lock cylinders......In Black perhaps?
Post by: V8Demon on September 08, 2010, 04:33:11 PM
Pretty much anytime you pull the door handle or type on the number pad on the keyless entry.
Title: Illuminated Lock cylinders......In Black perhaps?
Post by: jleews6 on September 08, 2010, 04:35:19 PM
Ok thanks last time my parents had one I was around 9 YO (our mark VII) so its been awhile..................holy  thats almost 11 years :D.
Title: Illuminated Lock cylinders......In Black perhaps?
Post by: jleews6 on September 09, 2010, 03:38:24 PM
O hey another question were the trunk locks lighted too?
Title: Illuminated Lock cylinders......In Black perhaps?
Post by: hypostang on September 09, 2010, 03:52:18 PM
Quote from: jleews6;335112
O hey another question were the trunk locks lighted too?


nope :D
Title: Illuminated Lock cylinders......In Black perhaps?
Post by: jleews6 on September 10, 2010, 08:12:48 PM
............my stupid OCD problem will kill me with that lol.