An upper intake plate that I believe is from from a Crown Vic that I am going to use on my bird just to be different,
I like that a lot.Especially without the "EFI" that most of those plates have.Nice work.I'm working on polishing a few for Ebay.The Sport has needs ya' know.
That must be an '86 plate. I like the '86 HO plate as well. It looks like that plate but with HO under the 5.0
I think it is from an 86 too, way back in the day I had a brand new 86 5.0 lx mustang coupe and I swapped the upper plate to the 87 style, and for the life of me I cannot remember what I did with the stock one :hick:
I know I would not have thrown it out because I never throw anything away
And Thanks guys I like it because of the lack of the "EFI" too
I have 10 or 15 plates in the garage.I need to see if I have one of those.
lol thats nice man, I am about to go to shop so i can Paint mine today, its going to be red and black for a friends.... its the HO put one ill send pictures
How are you guys getting the plates off?!
EVERYTIME i find a plate at the JY, I grab a torx bit and it ALWAYS BREAKS on the first screw. :mad::mad::mad:
Take some PB Blaster and soak them first and buy better quality Torx bits.
Have fun getting them off in the rust belt...lol.:punchballs:
Haha yeah I had to go to the store and buy my dad a one of that size, and when I used the new one it twisted it but didn't break.
Well, I went to the Junk yard today , and I check all the fuel injected 5.0's and NONE had the plate I am using
They had an 86 bird , Town Car and a Crown Vic All had "EFI" on them.
I'll look around at the yard next week while I'm there.If they have them,I'll polish them and sell them.I have a few others to polish as it is.