Text only | Text with Images

Fox T-Bird/Cougar Forums

General => Lounge => Topic started by: DVP on April 12, 2010, 10:57:06 PM

Title: Ford Trans HELP!!! Vulcan Bolt Pattern?
Post by: DVP on April 12, 2010, 10:57:06 PM
I need to find out ANY RWD auto trans that will bolt to a 3.0 Vulcan.

I know there must be a few since the Vulcan was common.
Title: Ford Trans HELP!!! Vulcan Bolt Pattern?
Post by: Chuck W on April 12, 2010, 11:05:10 PM
Only those found in a Ranger or Aerostar...

Which is why I'm going a different route.
Title: Ford Trans HELP!!! Vulcan Bolt Pattern?
Post by: DVP on April 12, 2010, 11:11:57 PM
Adapter plate it is.
Title: Ford Trans HELP!!! Vulcan Bolt Pattern?
Post by: DVP on April 12, 2010, 11:56:58 PM
A4LD.

Were the ones in TCs any stronger than n/a models?
Title: Ford Trans HELP!!! Vulcan Bolt Pattern?
Post by: cougarman on April 13, 2010, 07:23:43 AM
Quote from: DVP;318002
A4LD.

Were the ones in TCs any stronger than n/a models?


Nope.
Title: Ford Trans HELP!!! Vulcan Bolt Pattern?
Post by: DVP on April 14, 2010, 04:34:45 AM
I think the last thing I need to know is cross member info.

Will I need one from a A4LD car or can I use my AOD cross memeber?

Might make one up.
Text only | Text with Images