For sale is a set of energy suspension strut tower bushings with mounts for a mustang. The only thing you have to do is drill a new hole to mount them, this way you can use mustang struts like strange and other manufactures. I am no longer using them because I bought C.C. plates for my car, I will take $25. shipped. Also less then 1,000 miles on them
anyone?????
So if I were to buy these would I be able to run mustang struts on my 87 bird??
yes, but you have to drill 1 new hole about 3/8 to 1/2" because the front one is a little closer then the birds. I had these on my 86' with Strange mustang struts, very simple install
bump
$20. shipped
sold pm me your info Thanks
OK so after searching and reading for the strut options for the bird I need some help figuring out what struts to order for my 87 TC using these strut tower bushings I would like a little bit firmer ride and am planning on using all new polly control arm bushings with Mach springs. For the rear I am probably going to use a set of Chucks shock mounts and the KYB adjustable shocks. Any help would be appricaiated.
I have the strange 10 way adj. (for the fox mustangs) and you can dial them in to what type of driving you do.
http://www.jegs.com/i/Strange+Engineering/873/S6001EM/10002/-1
Will those work in my 87 TC using the mounts that I bought from you?
I dont know if this will help or not but I recently did some research and as far as I can tell 87 and 88 tbirds use Mustang struts
The part numbers listed by Monroe , Gabriel, and KYB are the same for fox Mustangs and 87,88 birds 83-86 birds list different numbers
OK I think that NATO just answered my questions I think I will be going with a set of Strange adjustables for the front and the strange adjustables for the rear with chucks adapters.
they should since both are fox bodies, but you might want to search for the correct info