Take some time and read through this thread.There's a lot of parts........
-Rear view mirror with compass.....$45.00 shipped
-One set of 8...19# fuel injectors...4 hole design....excellent shape....$45.00 shipped.
-Brand new,never used T-5 steel bearing retainer....$30.00 shipped (came from Jegs)
-'87/'88 Thunderbird driver side tail light assembly...pretty nice shape,needs cleaned...no cracks...$65.00 shipped
-Passenger side '87/'88 T-Bird tail light assembly....$55.00 shipped
-'87/'88 Passenger side signal light (outer front)...nice shape...$20.00 shipped (I have 2 of them)
-2-AOD flywheels...excellent shape...$20.00 plus shipping each
-5.0 cruise cable...$25.00 shipped
-SN-95 front sway bar end links (I had a set on my Bird once upon a time) ..poly bushings..excellent shape....complete...$15.00 shipped
-5.0 throttle cable bracket....$12.00 shipped
-Console switch panel..... it is completely blank....switch delete panel....$20.00 shipped
-HURST T-handle for T-5....redrilled and tapped for the T-5 shifter thread pattern.....$15.00 shipped
-console cubby....$15.00 shipped
-Smog tube for back of heads (5.0) almost new condition,new valve...$35.00 shipped
-Bead blasted 5.0 alternator bracket.Has not been installed since cleaned and blasted.....$45.00 shipped
-Gray power mirror switch.....$15.00 shipped...nice as new
-Turbo Coupe ignition key (one key)..new,uncut.....$10.00 shipped
-Turbo Coupe valve cover...says "TURBO" on it....$55.00 shipped....dirty but excellent shape.
-Billet T-5 shifter lever.......infinitely adjustable.....excellent shape....$25.00 shipped
-Factory rear control arms...excellent shape....no rust....$25.00 plus actual shipping
-Taurus electric fan....excellent shape.....$50.00 shipped
-5.0 Thunderbird injector harness...excellent shape....$45.00 shipped
-5.0 distributor....excellent shape,brand new rotor and cap.......$40.00 shipped
-NOS Genuine Ford parts '86 T-Bird trunk lock with glove box lock and keys...NOS...new...never used...silver,not black...$35.00 shipped
-Fuel tank straps....EXCELLENT shape.........$45.00 shipped.
V-man, I'll take the struts and power windows-only console switch panel, if you can wait till next week for the money order...:bowdown:
That's fine.Ive already had 2 PM's about them (the struts).I didn't think they'd be that popular.I don't know how much shipping will be,but,it will be actual UPS shipping charges,and I'll package them in the smallest box possible.Let me know when you're ready.Thanks a lot.
I hope you keep doing this as a year from now or so, I would like to have a bunch of general maintenance parts on hand that I rebuild in my own time for use as needed (such as those TC calipers). Until then, looking forward to seeing your next modifications to the car.
I'll post the progress on the Sport as it happens.I plan on having a lot more parts this spring that will possibly boggle everyone's mind.
whats your price on the valve covers vinnie?
Sorry about that.....fixed.
Any pics of the Marchal Fog Light? (Front and back would be great)
One of the mounting bolts broke on my pair, Would be great if yours matched my good one.
I don't have a pic.I can say,it's in excellent shape.I'll clean it up and take a pic tomorrow.No dents,rust,or broken anything.It doesn't have the little metal cat on it,BUT,I think I may have one somewhere.Trust me,I only sell good parts.My feedback should speak for that.
I'm interested in the covers if you still have them when I go back to work. sounds like a long shot but thought I'd throw it in.
Just let me know.They may still be here.I've got parts I need to get,so,the extras need to find a new home.
I'm sorry I have to ask, are you putting a new motor in the sport? Another v8? I'm confused, lol I have to know, whats comming, what are you changing, sorry for being nosey. Its just your car is really nice, and I'm jealous... Yeah, I admit it. I want a sweet t-bird and my Olds, but I can't have both.
Sounds great.
And i know you do Vin, Wouldn't question that at all~Just making sure it matches up with mine. (And I'm a pic w :rollin:)
Pic when I get home in a couple of hours.Stay tuned........
Marchall......
(http://i216.photobucket.com/albums/cc205/Vinnietbird/DSCF6502.jpg)
That's a match!
I'll take it, PM Me your Paypal. :cheers:
PM sent.Thanks a lot.
Now,everyone else...buy this stuff.Help a Sport out.
Payment sent, Thanks Vin.
Thankyou.I'll get it boxed and ready after work today.
What kind of an evil employer makes you work on New Year's Day? Holidays should be spent watching football and surfing the Fox Forums....
I work in a Veteran's nursing care facility. It's running 24/7. I also have to work every other Christmas and Thanksgiving.Those guys (I'm a veteran myself) need help even on the holidays.
Now,buy stuff asap.
Fordguy,thanks a lot.
I'll take the "turbo coupe" door inserts if they are in good shape. Let me know.
Thanks
Jim
They are not ripped or beat up.
I'll pay you right after dinner.
Then I'll ship them Monday.How about that?Thanks a lot.
A couple of more things added....buy them everyone !!! If you buy this weekend,I'm shipping Monday morning.
Whoever PM'd me....send them again.I deleted my messages.
Dibs on door cup inserts pics? nieasquidward@yahoo.com
Pics will be posted for you in the morning.They are gray,and in the factory Ford bags.Never opened.
Pic sent
New stuff added.........CHECK IT !!!
Keys added...Thinning out my stuff.
your welcome, thanks man.
PM's answered.
more stuff.
more......again.......
88 Turbo Coupe fuel pump assembly...........Does it come with the float?
Yes,the assembly.Pump and housing.The float,meaning the fuel gauge sender,is separate,but we can make a deal.
smack it up there.
Got a timing chain cover in there? one of the water pump bolts snapped off in the cover
Nope,not until I pull this current engine.Use some PB Blaster and soak the bolt,then use a hammer and punch and drive it out.That's a fairly common problem.I took my timing cover down and had it bead blasted,then painted it engine color.Try my idea,it'll probably work for you.I do believe I'm going to start gathering up front covers every chance I get.
The threads snapped off inside the cover (the top bolt/stud) I'd have to drill it out. it maybe time for a new one.
Oh,the threaded part.I was thinking lower in the cover.Can it be soaked and then use an easy out?I'll look around anyway and see what I can find for you.No promises,but I'll do my best.
I'll will try the easy out first. but it's pretty corroded in there. I'll start soaking it tomorrow
Let it soak pretty good for 24 hours if it's really bad.That stuff is good for these things.
If you need one pretty quick, I have a coupla extra ones.
Vinnie..I see you have a pending on the sn-95 struts...is that for me or for someone else...I completely forgot I mentioned wanting them...:hick: you can smack me upside the head if the pending is for me lol
It's fine if someone else has first dibs, but I'm still interested in the power windows-only switch panel :D
I will let you know after this weekend.
I've had plenty of people wanting me to hold parts,but no-one is following through.No more holding.Buy it don't.First come first serve.Some of these will go to Ebay next week.
New motor mounts added and a shfter handle....check it....buy it....
Some gone,some added......
Added parts......
pics of the billet shifter handle for t5?
here it is....I used it for about 2 weeks.
http://cgi.ebay.com/ebaymotors/FORD-MUSTANG-EXTREME-ADJUSTABLE-SHIFTER-HANDLE-_W0QQitemZ300389072205QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item45f0957d4d
ah, ok. thought it was the one UPR makes.
http://ep.yimg.com/ca/I/yhst-37354654005614_2090_30551054
Nope,this can be adjusted to pretty much any position you want.Like the one you posted,to a more forward position,to just about anything you want to get it just right for your arm's length.I removed it because I had installed a Ripper shifter with a built in handle.
do you still have the mark VIII mass air meter? lets talk if you do :D
Vinnie pics of the diff cover please.
88turbo,I still have the Mass Air meter for the Mark VIII.Wanna trade for the yoke?
Pic of the diff cover....
(http://i216.photobucket.com/albums/cc205/Vinnietbird/000_0445.jpg)
if there is wiring included and it will work with 19# injectors then its a deal
I was told it'll work with 19's,because Ford's Mass Air sensors weren't calibrated for the injectors,the computers were.
Update !!!!
Updated with new stuff.Buy it.
Any word on the Fog Light?
PM sent.
Make some reasonable offers.I need to clear these parts out.
More sold,more added.Let's make some deals and sell these parts.
hey vinnie, still got the 5.0 badges for sale? if so pm me and ill pick them up. thanks,dwight
Got 'em.Pm sent
pic of the power window switch?--irv
Do you mean the console switch panels?If so,I'll take a shot of them later and post it or send it to you.Give me your email address.I'm having trouble with Photobucket right now.
you listed a grey power window switch. not sure what you
meant.--irvsab@verizon.net
Sorry about that.LOL.I'll try to get a pic up soon.It's just like the square black switches we have,but it's a light gray color.Mint condition.
show the switch plate w/pw hole too .spares are nice
It'll be after work tomorrow,sorry guys.Hang tight and expect pics around 3:30 or so tomorrow afternoon.
The plates for the consoles are a little dirty,but should clean up just fine.As of right now,Fordtruckfreek stated he wants the one with the window switch only.I'll post thursday evening further details.
(http://i216.photobucket.com/albums/cc205/Vinnietbird/DSCF6685.jpg)
(http://i216.photobucket.com/albums/cc205/Vinnietbird/DSCF6683.jpg)
(http://i216.photobucket.com/albums/cc205/Vinnietbird/DSCF6686.jpg)
Sorry,I edited the listing.It is a power MIRROR switch,not for the windows as I had originally posted.Sorry about that.
i did buy black switch from you a while back. also some
pw switches. if you have any nos stuff let me know.
--irv
i only have the door handle cups for NOS parts right now.
Parts shipped today.Thanks guys.Someone buy the rest.
Do you still have the quad shocks?
I do have one pair left.....excellent condition,ready to go.
PMs answered.
Updated with some new parts.Take some time and read through it.
Parts sold and parts added.
Vinnie, I'll take the last item on your list:
"-'87/'88 Turbo Coupe trunk lock and matching glove box lock with "Turbo" key.....$20.00 shipped....nice shape"
I'll Paypal over the funds this evening when I get home from work.
Coolness.Thanks a lot.My PayPal is vinnietbird@sbcglobal.net
Vin how about a pic of those valve covers? Do they have the filler in the stock location?
I'll get a pic when i can.They are EFI valve covers,fill tube and baffle in place.They are finned aluminum with the word "COBRA" on them in raised letters with the center of the letters in Ford Blue.They are in very nice shape.I'm swapping them out because the new engine has a new set of smooth polished aluminum covers with my new stickers I just applied to them.I'm going for a slightly diferent look with the GT40-P.It may be a few days before I can get a pic of them.Like Saturday.Sorry about that.
no hurry when ever you can
They'll be osted as soon as I can.Stay tuned.
Vinnieeee, I'll take the thermo housing if still available?
It is available.PM sent.
parts sold and added
New stuff added again.man,it never stops.Go ahead and buy some stuff,I won't stop you.
updated