*80's 351W non-roller block
*bored, honed, mag'd, vat'd, balanced, new cam bearings, new freeze plugs, and oil gallery plugs by Harris Engine
*.030" over Speed Pro hyper flat top pistons (approx 9.5:1 CR with 61cc heads)
* ebay forged I-beam rods w/ arp bolts
* stock crank turned .010/.010
$800
*Comp Cams Magnum 292H hydro flat tappet cam
RPM Range: 2,500 to 6,500 rpm
Duration @ .050" lift: 244/244 (int/exh)
Valve lift: .534/.534 (int/exh)
*Comp Cams lifters
$100 (FREE with purchase of shortblock)
*brand New Powerbond SFI 28oz balancer
$150
*ARP 1/2" head studs
$75
*Scat 28oz SFI flexplate for AOD/big bell C4
sold
*Fox/crown vic 351 oil pan w/ pickup and a couple of dipsticks with tubes
$60
*Fox 351 AC bracket
$60
*BRAND NEW tall polished Ford Motorsport SBF valve covers(no longer in production)
$75
http://i220.photobucket.com/albums/dd188/32vfoxbird/351W/Picture101small.jpg (http://i220.photobucket.com/albums/dd188/32vfoxbird/351W/Picture101small.jpg)
http://i220.photobucket.com/albums/dd188/32vfoxbird/351W/motor_bronze_small.jpg (http://i220.photobucket.com/albums/dd188/32vfoxbird/351W/motor_bronze_small.jpg)
http://i220.photobucket.com/albums/dd188/32vfoxbird/351W/oilpan_after.jpg (http://i220.photobucket.com/albums/dd188/32vfoxbird/351W/oilpan_after.jpg)
http://i220.photobucket.com/albums/dd188/32vfoxbird/351W/Picture032small.jpg (http://i220.photobucket.com/albums/dd188/32vfoxbird/351W/Picture032small.jpg)
Located near Crosby and Channelview
rxracer at comcast dot net
Why are you gonna stop at 331?
nobody wants to trade a used 306 plus cash for this??
price drop
Not even gonna start debating with you over this....The cubes aren't why they break. I digress.
Where were you in July with this motor? I'd have gladly come down in person and hauled it off promptly putting it in front of my AOD in the Cougar...
Good luck with the sale :burnout:
No, but many people DO think it.....
I'm curious, how do you think this motor would hold up on a 1500 mile trip on the back of a flatbed? If you have this thing in a month, it MAY be doable for me..... It would mean sending my Trick Flows out for porting.....:evilgrin:
just be sure to strap it down tight. :)
and I will ship it for an extra $150.
You're making it difficult for me to keep my money.....
it's already off the stand and strapped to a dolly, too.
new prices!
Ttt
ttt
I hate you.
I hate you SOOOOO much. I just dropped $1100 on a camcorder and some accessories for the wife and you drop the price on that block to $800.
I hate you :hick:
it's been at $800 for awhile now. only recently that I'm throwing the cam and lifters in for free.
Leave the heads on it!! It'll be gone in a hurry.
the heads sold a long time ago.
ttt
ttt
Is this still shippable for 150? What do you get with it? You got my curiosity.
I looked at the pics when you say flat top on the pistons, what were you preferring to?
I do see valve reliefs.lol
they're flat tops with valve reliefs. they're no dished or domed.
Yes. Shortblock, cam, new lifters, water pump, and timing cover for $950 plus paypal fee(if using).
I need to think about it, The hyper pistons is what worry's me. It's a good price though.
well, there's nothing wrong with hyper pistons. they're cheaper, lighter than forged, and will last a long time if you tune your motor right.
I agree, but my next build and last will be forced of some type.
There's still an option for that yet. I need to get my priority's together. I have a few cars it could go in.
also have a good clean stock '79 351w shortblock for $200.