Print Page - front 5 lug

Title: front 5 lug
Post by: jcassity on October 03, 2009, 12:37:01 AM

any objections to converting rotors like what was done to these axles for 5lug?

Title: front 5 lug
Post by: Beau on October 03, 2009, 02:11:11 AM

EDITED:
Yeah, actually. New Mark VII 5 lug rotors are just easier and probably cheaper than "making" 4 into 5...

If you already have the TC/Stang 5.0 spindles (and 11" brakes) just get rotors for a 94' and up Stang GT. Only I meant Mark VII rotors, not Stang lol. My bad!

Title: front 5 lug
Post by: Thunder Chicken on October 03, 2009, 06:42:19 AM

That won't work, Beau. You'd need 94 and up Stang spindles and hubs to use 94 and up Stang brakes. What WILL work is Mark VII rotors.

Title: front 5 lug
Post by: the_intimidator03 on October 03, 2009, 07:09:43 AM

reason it wont work is our fox brakes are hub/rotor assy sn-95 is seperate hub and rotor assy which is GREAT reason to convert to sn-95 components :-D

Title: front 5 lug
Post by: Beau on October 03, 2009, 11:55:43 AM

Ah jeeze, I had a brainfart...sorry I posted wrong info :hick:

I KNEW there is a rotor that's 5 lug that goes on the Stang/TC spindle lol, just posted the wrong one.

As to the op's question/statement:
I suppose if you had stock 10" brake setup, and were careful to not get the rotor too hot, it could be done.

Fox T-Bird/Cougar Forums

Technical => Suspension/Steering => Topic started by: jcassity on October 03, 2009, 12:37:01 AM