Fox T-Bird/Cougar Forums

General => General Fox T-Bird/Cougar Discussion => Topic started by: Go Roush on April 13, 2005, 01:42:37 PM

Title: Tranny swapping
Post by: Go Roush on April 13, 2005, 01:42:37 PM
I have a 88 Tbird with a 5.0, but the tranny is slipping. Ialso have a 87 Tbird with a 3.8, and the tranny is good. My question is if the tranny behind both motors are the same except the bellhousing. So hopefully if needed I can use the 3.8 tranny behind my 5.0, with a bellhousing swap. Let me know, if anybody else knows.  Thank you
Title: Re: Tranny swapping
Post by: Ether947 on April 13, 2005, 01:52:45 PM
Bellhousing bolt patterns are the same between 3.8 and 5.0
Title: Re: Tranny swapping
Post by: dominator on April 13, 2005, 02:22:05 PM
3.8l trans will be much weaker though.
Title: Re: Tranny swapping
Post by: Ifixyawata on April 13, 2005, 04:26:13 PM
Quote from: dominator
3.8l trans will be much weaker though.

Are you 100% positive?  I recall someone on here using a 3.8 tranny without any problems.  If it's an AOD it's an AOD, right?
Title: Re: Tranny swapping
Post by: TurboCoupe50 on April 13, 2005, 04:51:59 PM
Quote from: Ifixyawata
Are you 100% positive?  I recall someone on here using a 3.8 tranny without any problems.  If it's an AOD it's an AOD, right?


The NA 3.8 trans has one less foward clutch than a 5.0/5.8 trans. But still its gonna be a bunch better tha any slipping 5.0 tranny. The 3.8 Super Coupe trans I have, is actually a little stronger than a 5.0 trans...