Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on July 13, 2009, 02:23:26 AM
Post by: GREYSHADOW on July 13, 2009, 02:23:26 AM
I sort-of half assed said I was parting this car a while back and honestly, I thought about it and I wanted to keep the car in one piece. Reality has set in the last 6 months of seeing it sit in my driveway and I know I will never do anything with the car. I am taking a few parts off the car for my 5.0 swap into my 89' Mustang Notchback but 99.9% of the parts are available.
134k
Grey exterior with very little surface rust
Light grey interior that is actually pretty nice sans the usual cracked dash and door handle insert/cup damage.
Before it is asked...the tail lights are shot ;)
I can try to get pics of just about anything you need.
PM me or post here and I will check daily.
Car is located near Asheville, NC
Thank you
Kevin
134k
Grey exterior with very little surface rust
Light grey interior that is actually pretty nice sans the usual cracked dash and door handle insert/cup damage.
Before it is asked...the tail lights are shot ;)
I can try to get pics of just about anything you need.
PM me or post here and I will check daily.
Car is located near Asheville, NC
Thank you
Kevin
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on July 13, 2009, 10:01:18 AM
Post by: GREYSHADOW on July 13, 2009, 10:01:18 AM
PMs returned...
Title: Parting out 88 Cougar LS 5.0
Post by: Live Fast on July 13, 2009, 10:10:23 AM
Post by: Live Fast on July 13, 2009, 10:10:23 AM
passenger fender any good?
Title: Parting out 88 Cougar LS 5.0
Post by: V8Demon on July 13, 2009, 10:12:12 AM
Post by: V8Demon on July 13, 2009, 10:12:12 AM
How are the seats?
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on July 13, 2009, 11:56:44 AM
Post by: GREYSHADOW on July 13, 2009, 11:56:44 AM
Quote from: Live Fast;282018
passenger fender any good?
I'll shoot ya a pic.. email?
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on July 13, 2009, 11:57:24 AM
Post by: GREYSHADOW on July 13, 2009, 11:57:24 AM
Quote from: V8Demon;282019
How are the seats?
Same as the last time you asked LOL..Sorry bout that..:D
I'll get you a few pics... E-Mail?
Title: Parting out 88 Cougar LS 5.0
Post by: V8Demon on July 13, 2009, 12:01:29 PM
Post by: V8Demon on July 13, 2009, 12:01:29 PM
Paul_Flockhart@hotmail.com ;)
Title: Parting out 88 Cougar LS 5.0
Post by: Live Fast on July 13, 2009, 02:01:57 PM
Post by: Live Fast on July 13, 2009, 02:01:57 PM
Quote from: GREYSHADOW;282024
I'll shoot ya a pic.. email?
jaysfords@live.com
thanks
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on July 14, 2009, 07:41:40 AM
Post by: GREYSHADOW on July 14, 2009, 07:41:40 AM
Live fast..
Pics being sent..
Demon..
I need to get my door key out of my drawer and open up the car. I will get your pics today..
Pics being sent..
Demon..
I need to get my door key out of my drawer and open up the car. I will get your pics today..
Title: Parting out 88 Cougar LS 5.0
Post by: vinnietbird on July 14, 2009, 08:23:28 AM
Post by: vinnietbird on July 14, 2009, 08:23:28 AM
Just in case no-one else gets them,what kind of seats are in it?Pics to vinnietbird@sbcglobal.net I also need rear seat belts.
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on July 17, 2009, 11:44:21 AM
Post by: GREYSHADOW on July 17, 2009, 11:44:21 AM
The seats are the standard LS split by the control consel seats I guess. Light grey in color. Car has a steering wheel column shifter.
I will be back in NC next Wed and will get everybody pics of what they were asking for. I'm home in Detroit until then.
I will be back in NC next Wed and will get everybody pics of what they were asking for. I'm home in Detroit until then.
Title: Parting out 88 Cougar LS 5.0
Post by: Tapkin on July 17, 2009, 04:44:13 PM
Post by: Tapkin on July 17, 2009, 04:44:13 PM
Don't forget about me. I'am searching for mouldings :) s0meth1ng@inbox.ru
Title: Parting out 88 Cougar LS 5.0
Post by: Live Fast on July 17, 2009, 06:51:19 PM
Post by: Live Fast on July 17, 2009, 06:51:19 PM
I emailed you back.
Where in NC are you?
Where in NC are you?
Title: Parting out 88 Cougar LS 5.0
Post by: 88turbo on July 17, 2009, 07:14:37 PM
Post by: 88turbo on July 17, 2009, 07:14:37 PM
are you parting with the engine harness and computer?
Title: Parting out 88 Cougar LS 5.0
Post by: V8Demon on July 17, 2009, 07:34:15 PM
Post by: V8Demon on July 17, 2009, 07:34:15 PM
I almost forgot. This is a consolette car, correct? I could use the casette tape holder portion. I have an idea for one. ;)
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on July 18, 2009, 12:11:55 AM
Post by: GREYSHADOW on July 18, 2009, 12:11:55 AM
Quote from: Tapkin;282577
Don't forget about me. I'am searching for mouldings :) s0meth1ng@inbox.ru
Honestly, I'm not overly interested in shipping parts to Russia. Give me an exact address and I will see about a quote I suppose.
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on July 18, 2009, 12:12:38 AM
Post by: GREYSHADOW on July 18, 2009, 12:12:38 AM
Quote from: Live Fast;282594
I emailed you back.
Where in NC are you?
Asheville area.
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on July 18, 2009, 12:14:31 AM
Post by: GREYSHADOW on July 18, 2009, 12:14:31 AM
Quote from: 88turbo;282596
are you parting with the engine harness and computer?
Yes...
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on July 18, 2009, 12:15:35 AM
Post by: GREYSHADOW on July 18, 2009, 12:15:35 AM
Quote from: V8Demon;282598
I almost forgot. This is a consolette car, correct? I could use the casette tape holder portion. I have an idea for one. ;)
Yep...:D
Title: Parting out 88 Cougar LS 5.0
Post by: massCougarxr7 on July 18, 2009, 11:00:34 AM
Post by: massCougarxr7 on July 18, 2009, 11:00:34 AM
turn signal??? on passenger fender???
Title: Parting out 88 Cougar LS 5.0
Post by: Live Fast on July 18, 2009, 04:21:19 PM
Post by: Live Fast on July 18, 2009, 04:21:19 PM
let masscougar get that signal. I wont be needing it.
Let me know when you get back to asheville and I will ride up that way.
Let me know when you get back to asheville and I will ride up that way.
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on July 18, 2009, 11:13:54 PM
Post by: GREYSHADOW on July 18, 2009, 11:13:54 PM
Quote from: massCougarxr7;282684
turn signal??? on passenger fender???
Mine has the trim only, no signal.
Live fast..
I will be back Wed of next week.
Title: Parting out 88 Cougar LS 5.0
Post by: Live Fast on July 19, 2009, 04:47:34 PM
Post by: Live Fast on July 19, 2009, 04:47:34 PM
good deal.
just pm me when you get here with a price.
just pm me when you get here with a price.
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on July 20, 2009, 12:00:37 AM
Post by: GREYSHADOW on July 20, 2009, 12:00:37 AM
Come see it, you determine what you think you want to pay, and I'll see if it's worth letting it go as is or parting. I really dont want to dissapoint the other guys who are looking for parts but we will see what we can work out. I would like to get around what I paid for it, which is $375, but thats neg.
Title: Parting out 88 Cougar LS 5.0
Post by: Live Fast on July 20, 2009, 09:19:31 AM
Post by: Live Fast on July 20, 2009, 09:19:31 AM
Its up to you. Its your car! lol
Does it have a motor/trans?
Does it have a motor/trans?
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on July 20, 2009, 11:03:21 AM
Post by: GREYSHADOW on July 20, 2009, 11:03:21 AM
It does..All the front acc's are off the motor but it started and ran before I started the removal. The trans shifted fine on the 5 mile drive from where I picked it up to my house. I have no knowledge of it's condition beyond that. I am using a few parts off that motor like the PS pump and fuel rails ect.
You mentioned you were just interested in the rolling chasis?
You mentioned you were just interested in the rolling chasis?
Title: Parting out 88 Cougar LS 5.0
Post by: Live Fast on July 20, 2009, 11:22:44 AM
Post by: Live Fast on July 20, 2009, 11:22:44 AM
Nah I dont need the chassis. I just need the pass. fender and possibly the motor/trans if you want to pm me a price for them
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on July 20, 2009, 12:02:20 PM
Post by: GREYSHADOW on July 20, 2009, 12:02:20 PM
PM'd
Title: Parting out 88 Cougar LS 5.0
Post by: Live Fast on July 20, 2009, 12:07:50 PM
Post by: Live Fast on July 20, 2009, 12:07:50 PM
replied thanks
Title: Parting out 88 Cougar LS 5.0
Post by: c_bass16@hotmail.com on July 21, 2009, 09:46:34 PM
Post by: c_bass16@hotmail.com on July 21, 2009, 09:46:34 PM
I have a bit of a list.
1. The driver side seat belt holder...(the thing that keeps it from rubbing on your neck...mounts at the top left of the drivers side seat.)
2. Center console working parts that make it latch shut. Or the lid and hatch parts if its easier.
3. The center piece for the horn. not the cover with the cougar logo, but the actual piece that the horn wires connect to.
4. Both speaker grills on the dash if the clips arent broke.
5. The Grill
Any or all...if you can send the info and a price quote to c_bass16@hotmail.com
1. The driver side seat belt holder...(the thing that keeps it from rubbing on your neck...mounts at the top left of the drivers side seat.)
2. Center console working parts that make it latch shut. Or the lid and hatch parts if its easier.
3. The center piece for the horn. not the cover with the cougar logo, but the actual piece that the horn wires connect to.
4. Both speaker grills on the dash if the clips arent broke.
5. The Grill
Any or all...if you can send the info and a price quote to c_bass16@hotmail.com
Title: Parting out 88 Cougar LS 5.0
Post by: 88turbo on July 21, 2009, 11:45:51 PM
Post by: 88turbo on July 21, 2009, 11:45:51 PM
Quote from: GREYSHADOW;282624
Yes...
how much for the harness and computer?
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on July 22, 2009, 09:09:46 AM
Post by: GREYSHADOW on July 22, 2009, 09:09:46 AM
Quote from: 88turbo;283210
how much for the harness and computer?
$100 shipped but I have another member that asked about it a while ago. If he falls through, you will have dibs.
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on July 22, 2009, 09:13:16 AM
Post by: GREYSHADOW on July 22, 2009, 09:13:16 AM
Quote from: c_bass16@hotmail.com;283169
I have a bit of a list.
1. The driver side seat belt holder...(the thing that keeps it from rubbing on your neck...mounts at the top left of the drivers side seat.)
2. Center console working parts that make it latch shut. Or the lid and hatch parts if its easier.
3. The center piece for the horn. not the cover with the cougar logo, but the actual piece that the horn wires connect to.
4. Both speaker grills on the dash if the clips arent broke.
5. The Grill
Any or all...if you can send the info and a price quote to c_bass16@hotmail.com
I'll take a look at what I got and let you know.
I can not find my keys to get in the car. Before vacation I went to get them and they were gone from my dresser drawer where they have been forever. Once I find them, I owe several people here pics of various parts, seats ect.
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on July 22, 2009, 02:11:18 PM
Post by: GREYSHADOW on July 22, 2009, 02:11:18 PM
So I go over to my neighbor that was feeding my dogs on vacation and he says "your not gonna kill me are ya".. I ask no why.. he says, you didn't see your cougar?
Well guess not... So I go up my drive and see it...
Apparently his e brake gave out on his truck while he was at my house and it rolled back my down driveway and rolled into the drivers rear quarter panel of the cougar. It's messed up pretty good. Large crease across the entire panel and it blew out the tail light. Nothing else got hit.
I am just glad that his truck did not roll back off the embankment that was inches away. My Cougar stopped it.:mad:
So.. For those who were asking about the whole car, I am sure this might make a difference. Prior to this, the body was very straight and just needed paint...:toilet:
Well guess not... So I go up my drive and see it...
Apparently his e brake gave out on his truck while he was at my house and it rolled back my down driveway and rolled into the drivers rear quarter panel of the cougar. It's messed up pretty good. Large crease across the entire panel and it blew out the tail light. Nothing else got hit.
I am just glad that his truck did not roll back off the embankment that was inches away. My Cougar stopped it.:mad:
So.. For those who were asking about the whole car, I am sure this might make a difference. Prior to this, the body was very straight and just needed paint...:toilet:
Title: Parting out 88 Cougar LS 5.0
Post by: 88turbo on July 29, 2009, 11:18:24 AM
Post by: 88turbo on July 29, 2009, 11:18:24 AM
how much for the passenger door glass? mine is missing the clip that holds it to the track. also checking up on that harness and computer. keep me posted. shipping is to 67005. Thanks
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on July 30, 2009, 01:55:58 PM
Post by: GREYSHADOW on July 30, 2009, 01:55:58 PM
Quote from: 88turbo;284367
how much for the passenger door glass? mine is missing the clip that holds it to the track. also checking up on that harness and computer. keep me posted. shipping is to 67005. Thanks
Jeez... I dunno..That would be $$$ and risky to ship unless prof packaged.
I will look into the cost and let you know..I'd say maybe $20-$30 for the glass it'self at most before shipping.
I'll let you know on the other stuff too.
Honestly, I would love for somebody to just come and get this whole thing. I'm willing to let the whole car go for $250.00
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on July 30, 2009, 02:13:13 PM
Post by: GREYSHADOW on July 30, 2009, 02:13:13 PM
c_bass16@hotmail.com
I e-mailed ya..
I e-mailed ya..
Title: Parting out 88 Cougar LS 5.0
Post by: V8Demon on July 30, 2009, 05:50:14 PM
Post by: V8Demon on July 30, 2009, 05:50:14 PM
You ever get the pics of those seat covers?
Title: Parting out 88 Cougar LS 5.0
Post by: 88turbo on July 30, 2009, 07:03:46 PM
Post by: 88turbo on July 30, 2009, 07:03:46 PM
250 isnt much and if you were closer to kansas I would be all over it.
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on July 30, 2009, 10:50:26 PM
Post by: GREYSHADOW on July 30, 2009, 10:50:26 PM
Quote from: V8Demon;284541
You ever get the pics of those seat covers?
I may have it sold all together. The new owner might be interested in selling the parts off because he is interested in the drivetrain..
I'll keep this updated.
I did take pics a while back.. Let me see if I have them.
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on July 30, 2009, 10:52:54 PM
Post by: GREYSHADOW on July 30, 2009, 10:52:54 PM
Quote from: 88turbo;284558
250 isnt much and if you were closer to kansas I would be all over it.
I know I could get a little more for it. I paid $375 but honestly, if it will help somebody out here and I make a few bucks towards whatever.. I'm happy. The wife and I are celebrating our 10th wedding anniversary in Sept. That money will go a long way towards our condo rental in Myrtle Beach.
Title: Parting out 88 Cougar LS 5.0
Post by: 88turbo on August 08, 2009, 04:06:35 PM
Post by: 88turbo on August 08, 2009, 04:06:35 PM
still interested and also need the trans crossmember. Thanks
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on September 04, 2009, 01:25:21 PM
Post by: GREYSHADOW on September 04, 2009, 01:25:21 PM
I FOUND MY KEYS!!!!!!!!!!!!!!!!!!!!! LOL
Finally...They were in a hole that was cut out in one of my other cars for a gauge set up I once had. They keys fell through the that 2 1/16th inch hole in the storage cubby and went under the center counsel. I looked for them for almost 2 months. I had a bright bulb moment and decided to look in there as a last resort to breaking a window.
I appologize for the absence and delay in responding.
That said.. I will catch up on pm's that you all have sent me and see who wants what and wanted it first. I have 2-3 people interested in the engine wire harness for instance. I am going to start working on the car today and taking parts off..
Fair game everybody...
Finally...They were in a hole that was cut out in one of my other cars for a gauge set up I once had. They keys fell through the that 2 1/16th inch hole in the storage cubby and went under the center counsel. I looked for them for almost 2 months. I had a bright bulb moment and decided to look in there as a last resort to breaking a window.
I appologize for the absence and delay in responding.
That said.. I will catch up on pm's that you all have sent me and see who wants what and wanted it first. I have 2-3 people interested in the engine wire harness for instance. I am going to start working on the car today and taking parts off..
Fair game everybody...
Title: Parting out 88 Cougar LS 5.0
Post by: 88turbo on September 04, 2009, 03:46:17 PM
Post by: 88turbo on September 04, 2009, 03:46:17 PM
found crossmember and harness. thanks anyways
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on September 04, 2009, 04:14:46 PM
Post by: GREYSHADOW on September 04, 2009, 04:14:46 PM
NP man...
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on September 05, 2009, 11:14:28 AM
Post by: GREYSHADOW on September 05, 2009, 11:14:28 AM
PMs returned.
Title: Dashboard Speaker grill - Passenger Side
Post by: Dave G. on September 06, 2009, 02:42:31 PM
Post by: Dave G. on September 06, 2009, 02:42:31 PM
Looking for a speaker cover for the passenger side dash.
Charcoal/smoke interior. Not sure if yours would match-up color wise or not.
Thanks,
Dave
Charcoal/smoke interior. Not sure if yours would match-up color wise or not.
Thanks,
Dave
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on September 06, 2009, 03:15:58 PM
Post by: GREYSHADOW on September 06, 2009, 03:15:58 PM
Quote from: Dave G.;290142
Looking for a speaker cover for the passenger side dash.
Charcoal/smoke interior. Not sure if yours would match-up color wise or not.
Thanks,
Dave
I believe mine is smoke..
Title: Parting out 88 Cougar LS 5.0
Post by: Dave G. on September 06, 2009, 05:31:59 PM
Post by: Dave G. on September 06, 2009, 05:31:59 PM
Assuming yours isn't broken like mine (during reinstall after heater core replacement), how much would you want?
If you can send a pic of the dash then we'll know if it's a match. My email is: david_george@rge.com
Thanks.
If you can send a pic of the dash then we'll know if it's a match. My email is: david_george@rge.com
Thanks.
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on September 06, 2009, 08:49:47 PM
Post by: GREYSHADOW on September 06, 2009, 08:49:47 PM
I went and looked at it. It's the DARK color. Charcoal I guess as with the dash pad.
It looked to be good. Prob never removed.
I'd do $5+ shipping.
LMK..
It looked to be good. Prob never removed.
I'd do $5+ shipping.
LMK..
Title: Parting out 88 Cougar LS 5.0
Post by: Dave G. on September 08, 2009, 10:13:42 AM
Post by: Dave G. on September 08, 2009, 10:13:42 AM
If you can get it off the dash without the retaining clips breaking, I'd be happy to give you $5 + shipping.
Let me know.
Thanks,
Dave
Let me know.
Thanks,
Dave
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on September 08, 2009, 12:16:03 PM
Post by: GREYSHADOW on September 08, 2009, 12:16:03 PM
Quote from: Dave G.;290356
If you can get it off the dash without the retaining clips breaking, I'd be happy to give you $5 + shipping.
Let me know.
Thanks,
Dave
I will get it tonight after work and let you know how it went.
Then we'll exchange info if it goes well LOL.
Title: Parting out 88 Cougar LS 5.0
Post by: RoyLPita on September 08, 2009, 12:39:11 PM
Post by: RoyLPita on September 08, 2009, 12:39:11 PM
Driver door and trunk lid. Send pics to RoyLPita@aol.com , please.
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on September 08, 2009, 02:36:10 PM
Post by: GREYSHADOW on September 08, 2009, 02:36:10 PM
Quote from: RoyLPita;290380
Driver door and trunk lid. Send pics to RoyLPita@aol.com , please.
Can do...
Shipping would be expensive though..
I have somebody wanting the lock set when the time comes. FYI..The locks would not come with the door/lid.
Title: Parting out 88 Cougar LS 5.0
Post by: daminc on September 08, 2009, 02:49:39 PM
Post by: daminc on September 08, 2009, 02:49:39 PM
let me know if the trunk lid doesn't sell.
I'm still looking, and willing to pay for freight shipping.
Jerry
I'm still looking, and willing to pay for freight shipping.
Jerry
Title: Parting out 88 Cougar LS 5.0
Post by: RoyLPita on September 08, 2009, 04:23:11 PM
Post by: RoyLPita on September 08, 2009, 04:23:11 PM
Quote from: GREYSHADOW;290386
Can do...
Shipping would be expensive though..
I have somebody wanting the lock set when the time comes. FYI..The locks would not come with the door/lid.
As long as the driver door has the keyless entry. As for freight, I'll worry about that.
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on September 08, 2009, 08:13:11 PM
Post by: GREYSHADOW on September 08, 2009, 08:13:11 PM
Quote from: RoyLPita;290393
As long as the driver door has the keyless entry. As for freight, I'll worry about that.
No keyless entry..sorry
Daminc..
I'll let you know.
Title: Parting out 88 Cougar LS 5.0
Post by: RoyLPita on September 08, 2009, 09:05:32 PM
Post by: RoyLPita on September 08, 2009, 09:05:32 PM
Quote from: GREYSHADOW;290427
No keyless entry..sorry
Daminc..
I'll let you know.
I'll hold off on the driver door. Does it have auto headlamps?
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on September 09, 2009, 01:08:13 PM
Post by: GREYSHADOW on September 09, 2009, 01:08:13 PM
Quote from: Dave G.;290356
If you can get it off the dash without the retaining clips breaking, I'd be happy to give you $5 + shipping.
Let me know.
Thanks,
Dave
Dave..
I attempted to pull it off today..Apparently, is has a few broken tabs from prior owner/s.
My appolgies for the hope building..
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on September 09, 2009, 01:08:32 PM
Post by: GREYSHADOW on September 09, 2009, 01:08:32 PM
Quote from: RoyLPita;290437
I'll hold off on the driver door. Does it have auto headlamps?
No..
Title: Parting out 88 Cougar LS 5.0
Post by: RoyLPita on September 09, 2009, 04:07:25 PM
Post by: RoyLPita on September 09, 2009, 04:07:25 PM
Quote from: GREYSHADOW;290540
No..
Okay. Thanx for letting me know. I am still waiting for the trunk lid pics.
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on September 10, 2009, 02:27:24 PM
Post by: GREYSHADOW on September 10, 2009, 02:27:24 PM
Quote from: RoyLPita;290564
Okay. Thanx for letting me know. I am still waiting for the trunk lid pics.
What do these things go for?
As soon as it stops raining, I will get you pics.
Title: Parting out 88 Cougar LS 5.0
Post by: RoyLPita on September 10, 2009, 08:39:23 PM
Post by: RoyLPita on September 10, 2009, 08:39:23 PM
Quote from: GREYSHADOW;290728
What do these things go for?
As soon as it stops raining, I will get you pics.
You have time. As for prices, I've seen them go for $50 and up.
Title: Parting out 88 Cougar LS 5.0
Post by: Wingnutt on September 11, 2009, 06:39:59 PM
Post by: Wingnutt on September 11, 2009, 06:39:59 PM
Sorry for not reading through 7 pages of requests, but do you have the ECU and complete under hood wiring harness?
Edit:
Read through the entire thread, if the other two interested parties don't work out, I'll take 'em!
Edit:
Read through the entire thread, if the other two interested parties don't work out, I'll take 'em!
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on September 11, 2009, 09:40:59 PM
Post by: GREYSHADOW on September 11, 2009, 09:40:59 PM
You have a PM wingnutt.
Title: Parting out 88 Cougar LS 5.0
Post by: 88turbo on September 12, 2009, 10:18:20 PM
Post by: 88turbo on September 12, 2009, 10:18:20 PM
sent PM
Title: Parting out 88 Cougar LS 5.0
Post by: Bruce M on September 13, 2009, 07:49:18 AM
Post by: Bruce M on September 13, 2009, 07:49:18 AM
How clear are the head lights? If the headlights are in good shape I'll need them to pass inspection.
How close are you to Huntersville?
How close are you to Huntersville?
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on September 13, 2009, 11:21:00 AM
Post by: GREYSHADOW on September 13, 2009, 11:21:00 AM
Quote from: Bruce M;291027
How clear are the head lights? If the headlights are in good shape I'll need them to pass inspection.
How close are you to Huntersville?
They are "ok" I guess. With some work (polish and elbow grease) they could be road worthy.
If your refering to Huntersville near Gastonia...I'm about an hour or so from there.
88 Turbo... You got a PM too..
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on September 15, 2009, 07:17:49 PM
Post by: GREYSHADOW on September 15, 2009, 07:17:49 PM
Roy...
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on September 15, 2009, 07:20:59 PM
Post by: GREYSHADOW on September 15, 2009, 07:20:59 PM
Here are some interior pics... Through the glass and not the greatest. I can get better..LOL Excuse the parts...I have been storing some Mustang stuff in there.
Title: Parting out 88 Cougar LS 5.0
Post by: daminc on September 15, 2009, 08:03:28 PM
Post by: daminc on September 15, 2009, 08:03:28 PM
I'm getting trunk lid envy.......
Title: Parting out 88 Cougar LS 5.0
Post by: RoyLPita on September 15, 2009, 08:08:05 PM
Post by: RoyLPita on September 15, 2009, 08:08:05 PM
I noticed that you said the taillights are shot. How bad is the left one?
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on September 15, 2009, 08:14:13 PM
Post by: GREYSHADOW on September 15, 2009, 08:14:13 PM
Broke from the side reflector to the curve round the back. The other light has a small cracked area near the license plate cutout but the rest is solid.
The trunk lid is in better shape then the pic shows. The clear coat is flaking bad and it's faded, but no rust.
The trunk lid is in better shape then the pic shows. The clear coat is flaking bad and it's faded, but no rust.
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on September 15, 2009, 08:14:51 PM
Post by: GREYSHADOW on September 15, 2009, 08:14:51 PM
Quote from: daminc;291352
I'm getting trunk lid envy.......
Why is that?
Interested in mine LOL..
Title: Parting out 88 Cougar LS 5.0
Post by: daminc on September 15, 2009, 08:20:13 PM
Post by: daminc on September 15, 2009, 08:20:13 PM
Quote from: GREYSHADOW;291361
Why is that?
Interested in mine LOL..
Only if the other offer falls through.
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on September 15, 2009, 08:24:57 PM
Post by: GREYSHADOW on September 15, 2009, 08:24:57 PM
Roy does have dibbs currently but no offers have been made.
Title: Parting out 88 Cougar LS 5.0
Post by: daminc on September 15, 2009, 08:28:18 PM
Post by: daminc on September 15, 2009, 08:28:18 PM
Quote from: GREYSHADOW;291371
Roy does have dibbs currently but no offers have been made.
I will definitely buy it if Roy doesn't.
Title: Parting out 88 Cougar LS 5.0
Post by: RoyLPita on September 15, 2009, 08:41:55 PM
Post by: RoyLPita on September 15, 2009, 08:41:55 PM
Any chance on pics of the left taillight assy?
PM me your email and I'll show you pics on the XR7 I'm looking to get and fix.
PM me your email and I'll show you pics on the XR7 I'm looking to get and fix.
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on September 16, 2009, 08:34:30 AM
Post by: GREYSHADOW on September 16, 2009, 08:34:30 AM
Quote from: RoyLPita;291379
Any chance on pics of the left taillight assy?
PM me your email and I'll show you pics on the XR7 I'm looking to get and fix.
Says your not able to..or not accepting PM's on your account?
Are you still intersted in the trunk lid as well as the left tail?
I will be w/o a computer until Sunday starting tomorrow..
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on September 16, 2009, 08:37:50 AM
Post by: GREYSHADOW on September 16, 2009, 08:37:50 AM
Quote from: daminc;291372
I will definitely buy it if Roy doesn't.
Your next on the list...
Title: Parting out 88 Cougar LS 5.0
Post by: V8Demon on September 16, 2009, 12:31:23 PM
Post by: V8Demon on September 16, 2009, 12:31:23 PM
If you have the patience to take the cloth off both of the front seats I'll gladly purchase it. I'll take that front armrest and the consolette plate with the cassette holder as well if you're willing to part with them. PM me ;)
Title: Parting out 88 Cougar LS 5.0
Post by: RoyLPita on September 16, 2009, 12:40:51 PM
Post by: RoyLPita on September 16, 2009, 12:40:51 PM
Quote from: GREYSHADOW;291416
Says your not able to..or not accepting PM's on your account?
Are you still intersted in the trunk lid as well as the left tail?
I will be w/o a computer until Sunday starting tomorrow..
All fixed. BTW, you have a PM.
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on September 16, 2009, 02:19:16 PM
Post by: GREYSHADOW on September 16, 2009, 02:19:16 PM
PMs returned..
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on October 05, 2009, 09:20:07 PM
Post by: GREYSHADOW on October 05, 2009, 09:20:07 PM
TTT........
Need to get this thing parted and out of my driveway LOL.
Need to get this thing parted and out of my driveway LOL.
Title: Parting out 88 Cougar LS 5.0
Post by: daminc on October 05, 2009, 09:22:52 PM
Post by: daminc on October 05, 2009, 09:22:52 PM
What's the status on the trunk lid?
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on October 05, 2009, 09:25:35 PM
Post by: GREYSHADOW on October 05, 2009, 09:25:35 PM
Yours if you still want it...
Title: Parting out 88 Cougar LS 5.0
Post by: daminc on October 05, 2009, 09:33:46 PM
Post by: daminc on October 05, 2009, 09:33:46 PM
lets make it happen then
Title: Parting out 88 Cougar LS 5.0
Post by: RoyLPita on October 05, 2009, 09:55:38 PM
Post by: RoyLPita on October 05, 2009, 09:55:38 PM
Sell it to Daminc. I still don't have the car yet.
Title: Parting out 88 Cougar LS 5.0
Post by: daminc on October 05, 2009, 10:38:12 PM
Post by: daminc on October 05, 2009, 10:38:12 PM
Kevin, send me your info, and I'll get a price from the shipping co, and get all the other info and instructions.
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on October 06, 2009, 10:24:48 AM
Post by: GREYSHADOW on October 06, 2009, 10:24:48 AM
Pm'd
Title: Parting out 88 Cougar LS 5.0
Post by: daminc on October 06, 2009, 07:13:33 PM
Post by: daminc on October 06, 2009, 07:13:33 PM
Your box is full can't reply back. ;)
Title: Parting out 88 Cougar LS 5.0
Post by: vinnietbird on October 06, 2009, 08:35:02 PM
Post by: vinnietbird on October 06, 2009, 08:35:02 PM
I need a cheap injector harness.
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on October 07, 2009, 08:49:47 AM
Post by: GREYSHADOW on October 07, 2009, 08:49:47 AM
Should work now..
Vin..How cheap is cheap LOL? I haven't forgot the part you hooked me up on buddy...:D
Vin..How cheap is cheap LOL? I haven't forgot the part you hooked me up on buddy...:D
Title: Parting out 88 Cougar LS 5.0
Post by: vinnietbird on October 07, 2009, 09:25:17 AM
Post by: vinnietbird on October 07, 2009, 09:25:17 AM
How much do you want for it?Whatever your bottom price is.LOL.Thanks a lot.
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on October 07, 2009, 10:12:27 AM
Post by: GREYSHADOW on October 07, 2009, 10:12:27 AM
$25.00 shipped?
Title: Parting out 88 Cougar LS 5.0
Post by: daminc on October 07, 2009, 05:22:19 PM
Post by: daminc on October 07, 2009, 05:22:19 PM
pm sent
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on October 07, 2009, 06:38:16 PM
Post by: GREYSHADOW on October 07, 2009, 06:38:16 PM
Ditto.......
Vinnie..?
Vinnie..?
Title: Parting out 88 Cougar LS 5.0
Post by: vinnietbird on October 08, 2009, 12:58:22 PM
Post by: vinnietbird on October 08, 2009, 12:58:22 PM
Greyshadow,I got the sender and found my harness.Thanks for your time and trying to help me,I appreciate that.
Title: Parting out 88 Cougar LS 5.0
Post by: vinnietbird on October 08, 2009, 12:58:35 PM
Post by: vinnietbird on October 08, 2009, 12:58:35 PM
By the way,your pM box is full.
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on October 08, 2009, 01:41:17 PM
Post by: GREYSHADOW on October 08, 2009, 01:41:17 PM
I can't keep that thing cleaned out for a day it seems LOL
NP man.......
Thanks..
NP man.......
Thanks..
Title: Parting out 88 Cougar LS 5.0
Post by: vinnietbird on October 08, 2009, 01:48:36 PM
Post by: vinnietbird on October 08, 2009, 01:48:36 PM
It's because you're popular.LOL.
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on October 09, 2009, 07:48:23 PM
Post by: GREYSHADOW on October 09, 2009, 07:48:23 PM
Quote from: vinnietbird;294098
It's because you're popular.LOL.
Must not be...I've only sold the seatbelt sleaves and the trunk (if I can find a pallet LOL)
Title: Parting out 88 Cougar LS 5.0
Post by: daminc on October 09, 2009, 07:51:36 PM
Post by: daminc on October 09, 2009, 07:51:36 PM
Quote from: GREYSHADOW;294225
Must not be...I've only sold the seatbelt sleaves and the trunk (if I can find a pallet LOL)
Then I won't ask if you found one yet. LOL
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on October 11, 2009, 10:29:25 AM
Post by: GREYSHADOW on October 11, 2009, 10:29:25 AM
I'll get on it this week early..
Title: Parting out 88 Cougar LS 5.0
Post by: ThePrimerSuspect on October 14, 2009, 12:24:29 AM
Post by: ThePrimerSuspect on October 14, 2009, 12:24:29 AM
hey i need a passenger side door panel if its in good shape. best to email me. thanks!
theprimersuspect@aol.com
theprimersuspect@aol.com
Title: Parting out 88 Cougar LS 5.0
Post by: mcb82gt on October 19, 2009, 09:15:13 PM
Post by: mcb82gt on October 19, 2009, 09:15:13 PM
What about the passenger side outer marker light?
Title: Parting out 88 Cougar LS 5.0
Post by: 88turbo on October 19, 2009, 10:18:05 PM
Post by: 88turbo on October 19, 2009, 10:18:05 PM
does your car have the cornering lamps?
Title: Parting out 88 Cougar LS 5.0
Post by: Beau on October 20, 2009, 03:21:18 AM
Post by: Beau on October 20, 2009, 03:21:18 AM
If it has the manual style heater controls, would you consider shipping the heater box assembly to 64651, Laclede, Missouri?
I'm in dire need of the heater/ac box..thank you :D
I'm in dire need of the heater/ac box..thank you :D
Title: Parting out 88 Cougar LS 5.0
Post by: daminc on October 20, 2009, 07:33:01 AM
Post by: daminc on October 20, 2009, 07:33:01 AM
sent you a PM
Title: Parting out 88 Cougar LS 5.0
Post by: mcb82gt on October 20, 2009, 02:45:31 PM
Post by: mcb82gt on October 20, 2009, 02:45:31 PM
Quote from: 88turbo;295580
does your car have the cornering lamps?
Are you asking me? Mine has the turning lamps, but I need the outer park light.
Title: Parting out 88 Cougar LS 5.0
Post by: 88turbo on October 20, 2009, 03:43:07 PM
Post by: 88turbo on October 20, 2009, 03:43:07 PM
I was asking greyshadow. is yours the 87-88 model? if so, are they the same as the bird?
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on October 21, 2009, 02:31:12 PM
Post by: GREYSHADOW on October 21, 2009, 02:31:12 PM
Quote from: 88turbo;295580
does your car have the cornering lamps?
The front molding corner lamps? No..
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on October 21, 2009, 02:31:48 PM
Post by: GREYSHADOW on October 21, 2009, 02:31:48 PM
Quote from: ThePrimerSuspect;294744
hey i need a passenger side door panel if its in good shape. best to email me. thanks!
theprimersuspect@aol.com
Pm'd
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on October 21, 2009, 02:33:15 PM
Post by: GREYSHADOW on October 21, 2009, 02:33:15 PM
Quote from: mcb82gt;295652
Are you asking me? Mine has the turning lamps, but I need the outer park light.
The outer piece of the 3 piece headlight set or the front molding lamps?
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on October 21, 2009, 02:34:37 PM
Post by: GREYSHADOW on October 21, 2009, 02:34:37 PM
Quote from: FordTruckFreeek;295612
If it has the manual style heater controls, would you consider shipping the heater box assembly to 64651, Laclede, Missouri?
I'm in dire need of the heater/ac box..thank you :D
Would I have to pull the whole dash out to get to it? I do have manual controls.
Title: Parting out 88 Cougar LS 5.0
Post by: Beau on October 21, 2009, 05:48:52 PM
Post by: Beau on October 21, 2009, 05:48:52 PM
yeah, it's kind of a pain too.
I have someone with the electronic style i'm talking with, so if you'd rather not, that's fine. I'll let you know what I decide. Thanks for the reply. :D:D
I have someone with the electronic style i'm talking with, so if you'd rather not, that's fine. I'll let you know what I decide. Thanks for the reply. :D:D
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on October 21, 2009, 09:05:16 PM
Post by: GREYSHADOW on October 21, 2009, 09:05:16 PM
Np..
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on October 25, 2009, 06:14:54 PM
Post by: GREYSHADOW on October 25, 2009, 06:14:54 PM
Ttt
Title: Parting out 88 Cougar LS 5.0
Post by: mcb82gt on October 26, 2009, 09:17:37 AM
Post by: mcb82gt on October 26, 2009, 09:17:37 AM
Quote from: GREYSHADOW;295760
The outer piece of the 3 piece headlight set or the front molding lamps?
The outer piece of the 3 headlight assembly, is what I need. Passenger side.
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on October 26, 2009, 09:57:11 AM
Post by: GREYSHADOW on October 26, 2009, 09:57:11 AM
Quote from: mcb82gt;296419
The outer piece of the 3 headlight assembly, is what I need. Passenger side.
Mine is hazed a bit but could clean up. Let me get you a pic..
Pm your E-Mail
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on November 09, 2009, 08:10:58 AM
Post by: GREYSHADOW on November 09, 2009, 08:10:58 AM
TTT...
v8DEMON...Workin on that interior stuff. I have the tray out and cleaned up. Still need to get the arm rest assem apart and the covers off.
v8DEMON...Workin on that interior stuff. I have the tray out and cleaned up. Still need to get the arm rest assem apart and the covers off.
Title: Parting out 88 Cougar LS 5.0
Post by: mercurycat on November 18, 2009, 07:32:36 PM
Post by: mercurycat on November 18, 2009, 07:32:36 PM
HI, Do you have an over flow bottle?
Thanks
Ken
Thanks
Ken
Title: Parting out 88 Cougar LS 5.0
Post by: jncocowboyx on November 26, 2009, 08:56:15 AM
Post by: jncocowboyx on November 26, 2009, 08:56:15 AM
"Before it is asked...the tail lights are shot"
FFFFFFFFFFFFFFUUUUUUUUUUUUUUUUUUUUUUUU...
FFFFFFFFFFFFFFUUUUUUUUUUUUUUUUUUUUUUUU...
Title: Parting out 88 Cougar LS 5.0
Post by: pjn2557 on November 28, 2009, 01:49:38 PM
Post by: pjn2557 on November 28, 2009, 01:49:38 PM
I am in need of the a couple of parts for my 1988 Cougar XR-7 5.0L
a) front wheel spindle for driver side, 10" rotors
b) drivers seat belt buckle (female piece)
c) valve cover mounting bolt(s) - only need 1-2, not sure if I can go to Lowe's and just buy a bolt or if they need to be special thread..do you know?
Shipping would be to Buffalo, NY suburbs, 14004...
Could you let me know prices and if the parts are available? Thanks!
PM or email is fine...(pjn2557@msn.com)...
a) front wheel spindle for driver side, 10" rotors
b) drivers seat belt buckle (female piece)
c) valve cover mounting bolt(s) - only need 1-2, not sure if I can go to Lowe's and just buy a bolt or if they need to be special thread..do you know?
Shipping would be to Buffalo, NY suburbs, 14004...
Could you let me know prices and if the parts are available? Thanks!
PM or email is fine...(pjn2557@msn.com)...
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on December 10, 2009, 08:04:56 PM
Post by: GREYSHADOW on December 10, 2009, 08:04:56 PM
Quote from: pjn2557;300445
I am in need of the a couple of parts for my 1988 Cougar XR-7 5.0L
a) front wheel spindle for driver side, 10" rotors
b) drivers seat belt buckle (female piece)
c) valve cover mounting bolt(s) - only need 1-2, not sure if I can go to Lowe's and just buy a bolt or if they need to be special thread..do you know?
Shipping would be to Buffalo, NY suburbs, 14004...
Could you let me know prices and if the parts are available? Thanks!
PM or email is fine...(pjn2557@msn.com)...
Spindle needs to stay on the car for the time being.
Buckle I can prob help you on... do you need gray?
Cover bolts as well are a go..
Still need the parts?
$15.00 shipped priority mail.
LMK..
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on December 10, 2009, 08:05:47 PM
Post by: GREYSHADOW on December 10, 2009, 08:05:47 PM
Quote from: mercurycat;299332
HI, Do you have an over flow bottle?
Thanks
Ken
Yes...
Still need it?
Title: Parting out 88 Cougar LS 5.0
Post by: fordguy on December 14, 2009, 09:25:21 PM
Post by: fordguy on December 14, 2009, 09:25:21 PM
i didn't want to read all 126 posts
are the engine mounts good? i need the mount brackets that go on the engine. are they spoken for? if not price shipped to fl 34609 please
are the engine mounts good? i need the mount brackets that go on the engine. are they spoken for? if not price shipped to fl 34609 please
Title: Parting out 88 Cougar LS 5.0
Post by: GREYSHADOW on January 09, 2010, 01:53:20 PM
Post by: GREYSHADOW on January 09, 2010, 01:53:20 PM
One of the mounts is shot.