Print Page - EFI to carb (problem solved)

Title: EFI to carb (problem solved)
Post by: Clayton on April 07, 2005, 07:05:06 PM

this is for me as much as it is for everyone.... what is needed to convert to carb?
HLY-12-801-1 (holley red 7psi 97 gph pump)
(http://static.summitracing.com/global/images/prod/large/hly-12-801-1.jpg)
or
CRT-M6962 (Carter 120 gph mechanical fuel pump)
(http://static.summitracing.com/global/images/prod/large/crt-m6902.jpg)
LOK-KD2AODHT (lokar kickdown kit *not a problem with T-5*)
(http://static.summitracing.com/global/images/prod/large/lok-kd-2350ht.jpg)
you need a fuel sender from a carbed tbird or mustang

i got the basics i need to know what to do with ignition to help me and the others to save us from any further stupid carb questions help me complete this easy parts list :D

(sticky please!)

Title: Re: EFI to carb (incomplete information need help finishing)
Post by: Ifixyawata on April 07, 2005, 07:12:20 PM

All you need is mostly here:

http://www.jason.fletcher.net/tech/efi-carb/efi-carb.htm

Title: Re: EFI to carb (incomplete information need help finishing)
Post by: Ifixyawata on April 07, 2005, 07:13:00 PM

Oh... and I would use the electric pump. Otherwise you'll be tearing the front of your motor off down to the timing cover.

Title: Re: EFI to carb (incomplete information need help finishing)
Post by: Clayton on April 07, 2005, 07:15:53 PM

link doesnt work.....

Title: Re: EFI to carb (incomplete information need help finishing)
Post by: Ifixyawata on April 07, 2005, 07:23:18 PM

Try This (http://www.jason.fletcher.net/tech/efi-carb/efi-carb.htm)

Title: Re: EFI to carb (incomplete information need help finishing)
Post by: Clayton on April 07, 2005, 07:26:46 PM

got it....

Title: Re: EFI to carb (incomplete information need help finishing)
Post by: Clayton on April 07, 2005, 07:51:17 PM

ill stick with EFI heh

Title: Re: EFI to carb (problem solved)
Post by: Ifixyawata on April 07, 2005, 07:54:27 PM

Good call. I'm reconsidering my plans to convert my CFI bird over the Carb at this very moment.

Title: Re: EFI to carb (problem solved)
Post by: Clayton on April 07, 2005, 08:21:27 PM

yeah, go with one of those edelbrock pro flo kits
or an accel DFI setup....

Title: Re: EFI to carb (problem solved)
Post by: SirChirpAlot on April 08, 2005, 01:38:49 AM

I changed my T bird to carb and all i did was chop all the wires out but the 2 power feed wires and swaped fuel tanks. if i didn't have a good tank i would have just gone with a elc fuel pump.

But i also swaped in my 351 that was already carbed.

Fox T-Bird/Cougar Forums

Technical => Engine Swapping => Topic started by: Clayton on April 07, 2005, 07:05:06 PM