Well i am going to be pulling some parts off my 86 cougar before it gets hauled off. Its got the v6 blue int/ext. I am cutting a patch panel off the right rear 1/4 panel for my car and pulling the seats out for my car as well. Anything else just let me know.
I have both Manual seats racks for drivers and passenger side that will be available. I do have a couple sets of front fenders, misc interior parts and peices. Just let me know what your intrested in. I do also have a Recently Rebuilt C5 that is in the car right now that i will be pulling out as well
Car is located outside of Roseburg, Oregon 97470 I am quite flexible and can make things work.
I have 1 passenger fender spoken for and the Driverside manual seat track is spoken for as well
I'm looking for a pass side fender with out cornering lamps. I would need it shipped if that is something you would want to mess with. If so my zip is 14701, NY.
none of my fenders have cornering lamps. they are straight the belt moulding is probably a little curled tho and do you need it with antenna or without? Shipping can always be arranged
All I need is the fender itself, I have all the add ons. Thanks
You have a pm. :burnout:
I need the seat belt buckle, the part next to the console.
Tail lights?
Front turn signals?
front signals are off and i have a passenger tail light i beleive, as far as belts i do need the female part of the drivers seat but i may have some others laying around id have to check when i get down there.
I'll buy both the drvr and pass seat tracks but only if they are sold together. Cash here waiting on you. Call me at 904-704-4605 to set it up.
You have another pm. :D
The drivers side seat rack is already spoken for but if it falls thru its all yours.
I do want to make an apology to all i have yet to be able to get to my parts care due to financial constraights and family issues but please let me know what parts are intrested and i will bring them up here with me when i get down there.
Eric
PM me a price. Do you have any grills?
as a matter of fact i should have an extra 85-86 grill Lemme clean up my PM box and ill get you some prices
What do the door panels look like? In particular the arm rests...
Hi,I need a left fender for an 85 TurboCoupe if it's the same as a Cougar.
Shipping to 06320.
Please let me know.
Thanks, Joe
alright im pretty sure the turbocoupe fender would be the same. do you need the trim on the fender? the existing trim may be in ok shape id have to double check.
No, trim not needed.Seems from what I can find out is the only difference in the fenders may be that right behind the wheel above the belt molding mine has about a 3/4 inch "crease" that follows the body on the door and rear quarter.If yours have that, we're in business.
Many thanks, hope to hear back from you soon.
Joe
I do want to appologize forthe length of time it has taken to get parts up here. im back working and traveling all over the state and washington as well.. the parts will be available by the end of the month... i will pull fenders and other usable parts and bring them home with me My fenders DO have the crease that runs around the body right above the belt moulding. Once these parts are home we can continue with any deal's that need to be made. again i do appologize