Fox T-Bird/Cougar Forums

Technical => Engine Tech => Topic started by: 1986Élan on April 30, 2009, 06:16:44 PM

Title: 5.0 tailpipes
Post by: 1986Élan on April 30, 2009, 06:16:44 PM
Hi everyone!    i was wondering if these tailpipes would be a good fit on an 86 bird  my guess is they'll be a little short due to the T bird longer wheelbase over the mustang  but is there a way of fixing it  anyways i want the tailpipes to stick out just like 5.0 mustangs do are there pipes a good choice ou you guys recommmend another set

thanx alot everyone    here is the link  http://www.latemodelrestoration.com/iwwida.pvx?;item?item_no=LRS-5212PR%20%20%20%20%201&comp=LRS
Title: 5.0 tailpipes
Post by: vinnietbird on April 30, 2009, 06:27:40 PM
Stang pipes are too short.I have a set on mine and had to have them lengthened a few inches.I don't remember how much,I think 8 or 10 inches.
Title: 5.0 tailpipes
Post by: 1986Élan on April 30, 2009, 06:33:14 PM
so what should i get? unless its not a prob to make them longer at the ler shop? modify the piece thats going over the axle  whats my best bet  if i want that 5.0 look
Title: 5.0 tailpipes
Post by: Sick88Tbird on April 30, 2009, 06:36:13 PM
From the ler and over the axle, they're fine...they just come up short at the end...I'm assuming super long exhaust tips would work.

Good luck,
Don
Title: 5.0 tailpipes
Post by: vinnietbird on April 30, 2009, 07:01:21 PM
I bought 2 1/2 inch mandrell bent pipes that were just straight cut on the end,no tips.I had mine lengthened,and added my tips.
Title: 5.0 tailpipes
Post by: DVP on May 01, 2009, 01:20:19 AM
Bah, Tail pipes are over rated.

This should help with lengths and stuff
http://www.coolcats.net/tech/advanced/50dualexhaust.html
Title: 5.0 tailpipes
Post by: Kitz Kat on May 01, 2009, 03:21:04 AM
Stinger makes some that fit our cars, they cost a little more. here's a link page down to find them. I think They shipped to me for free.
http://www.stinger-performance.com/headerparts.html
Title: 5.0 tailpipes
Post by: 85TBird5ltr on May 01, 2009, 07:28:42 AM
I have the dynomax 2 1/4 tailpipes on mine w magnaflow 2 1/4-3 by 18inch tips to clear my rear bumper. You have to have a different set of hanger put on since the right wont have one or our cars =[  But they work. This is the second time i've used them
Title: 5.0 tailpipes
Post by: Sick88Tbird on May 01, 2009, 04:32:34 PM
Quote from: DVP;269983
Bah, Tail pipes are over rated.


I agree 110%...however, around here you'll get pulled over if your car is loud and you don't have big shiny exhaust tips hangin' out.
Title: 5.0 tailpipes
Post by: shame302 on May 01, 2009, 05:02:01 PM
I have some aftermarket ones that would be easy to mod. They are either polished or plated stainless, slash cut 3-1/2 tips (long ones) that are attached to 2 1/2 tails with s. 110 shipped. my apologies for whoring parts out outside the classifieds....
(http://i19.photobucket.com/albums/b174/shame302/100_5457.jpg)