I've got a heater core to do... how much work would I be adding to put the dash from an 87 TC back into my 86? Is it just disassemble/reassemble or are the mods to make? Is the wiring plug and play or will I need to mod the harness beyond what the digital to buttstuffog guage conversion calls for?
I've got the seats and console covered already. I hope...
The dash itself will swap. The instrument cluster will swap per the instructions on CoolCats.
A V6 car will need a tach wire run and the tach modified with a resistor to read somewhat accurately (provided it's an 87/88 unit).