Text only | Text with Images

Fox T-Bird/Cougar Forums

Technical => Engine Tech => Topic started by: Romeo2k on April 21, 2009, 10:14:05 PM

Title: Retro Fit Link Bar Rollers
Post by: Romeo2k on April 21, 2009, 10:14:05 PM
Do all "Link Bar" Hydraulic Roller Lifters work with any 302/351 roller cam, or is it still specific.

Like~If i randomly went on ebay then searched for 302/351 link bar lifters, And there wasnt much info about them, I could just assume they would work with any roller cam?
Title: Retro Fit Link Bar Rollers
Post by: dominator on April 22, 2009, 07:22:04 AM
Using mine with my trickflow stage1.
If you know what they look like just look for the same ones.
Most guys selling them will say what they are selling them from.
What year is your 5.0L???
Title: Retro Fit Link Bar Rollers
Post by: Romeo2k on April 22, 2009, 05:07:56 PM
92 351w (Out of a Bronco)
Title: Retro Fit Link Bar Rollers
Post by: thunderjet302 on April 22, 2009, 06:40:49 PM
Yep the link bar lifters work with any hydrolic cam. They are a much better option for non-roller blocks than retrofiting the stock roller lifter set up.
Title: Retro Fit Link Bar Rollers
Post by: dominator on April 22, 2009, 09:16:11 PM
92 351 should be roller already i believe.
Title: Retro Fit Link Bar Rollers
Post by: Haystack on April 22, 2009, 10:19:52 PM
94 up offically.
Title: Retro Fit Link Bar Rollers
Post by: dominator on April 23, 2009, 07:16:37 AM
Really,hmmm i did not know that.
Title: Retro Fit Link Bar Rollers
Post by: TurboCoupe50 on April 23, 2009, 09:22:33 AM
Quote from: dominator;268761
Really,hmmm i did not know that.


Yup, a 5.8 block has to be a F4 casting to have the roller provisions...
Text only | Text with Images