Like the title says, I need some of the clips to hold the rear window trim on my '88 Bird. I've checked glass places and they're obsolete. I don't have a pic of a good one but these are about 1.25" long and 3/8" wide and mount on little studs on the body of the car, then the trim clips onto them. I need about 10. A former member was supposed to send me some years ago but they never came, and I didn't press it because trim was down on my list of priorities. Now it's back near the top. Any of you southern guys have a parts T-Bird lying around with these clips?
Look here. About ten items down.
http://automotive-hardware.com/auto-body-clips-c-14.html?gclid=CPb8refZ2JkCFYVM5QodcHY3YA
Fifty for $7.50 on this page...
http://www.clipsandfasteners.com/Ford_Clips_And_Fasteners_s/63.htm
Body shop got a box of 'em when my car was painted - I'll look for them when I get home. One of the above is too square looking and I can't find the part on the other site (I know what they should look like from memory).
This may be what you need, showing still available.
Dorman #700-405
Ivygreen and Kitz Cat: Those are the windshield clips. I've got a bunch of those, it's the rear window clips I need.
I might have some from an '87 XR7 Cougar. Buried in my Tbird room somewhere, though.
That should be the clips that hold the molding on. At least that's what I thought.
Kitz: It is the clip that holds the windshield moulding on. The rear window moulding clips are different. They're about 1.25-1.5" long and about 3/8" tall. If I still had a good one I'd take a pic.
Now, keep in mind this is a T-Bird. Cougars might use the same clips front and rear.
rear clips are the thin ones. I'll see what I can do for you this afternoon
Here's what survived years of rusting from the parts bird. They're a little rusted still, but you can have them if you want. 6 are better then none.
(http://i233.photobucket.com/albums/ee79/daminc/parts%20to%20sell/IMG_5246.jpg)
Those are the ones I need. I'll send you a PM, Jerry
Back at you
TC, I'd still try Dorman. I had to hunt down some shorter ones for the '83. The ones I needed weren't as short as yours, but they were different from the fronts.
I emailed Dorman and got the part number and then got the parts from RockAuto
OK, I found the part number the auto body guy used for these clips:
J&T Automotive (http://"http://www.jandtautomotive.com/")
P/N - 1412
`84 Ford Backlite
Moulding Clip
#E4ZB-6142413-AA