Print Page - Need 5.0 Engine Pics

Title: Need 5.0 Engine Pics
Post by: ponyman460 on March 23, 2005, 01:10:09 PM

NEED PICs of 86 5.0 Engine

--------------------------------------------------------------------------------

Anybody got any detailed engine pics? I need some top shots from both sides and all angles...I have a few brackets waiting to go on that I forgot where they go. Thanks!

Rick

Title: Re: Need 5.0 Engine Pics
Post by: V8Demon on March 23, 2005, 01:31:34 PM

I don't have A/C anymore, but everything else bolts up the same.

Title: Re: Need 5.0 Engine Pics
Post by: V8Demon on March 23, 2005, 01:32:28 PM

and one more From the other side: If you need something specific lemme know

Title: Re: Need 5.0 Engine Pics
Post by: ponyman460 on March 23, 2005, 01:54:25 PM

thanks! is yours different than mine? My ac compressor is on the top side of the drivers side bracket...the one that holds the power steering too. There are rod like brackets that bolt to the brackets that hold the accessories...got any pis of them?

Rick

Title: Re: Need 5.0 Engine Pics
Post by: V8Demon on March 23, 2005, 02:21:34 PM

My A/C is gone. I took it out and put in The Ford A/C eliminator bracket and a power steering Bracket from a mustang (The power steering bracket on our cats and birds is different and will not work with the eliminator.) As ar as the rods they went from the back of the A/C down to the power steering bracket if I remember correctly. I don't have any pics of those. Master Blaster has some perhaps? :dunno:
Anyhow here's a couple more that might help

Title: Re: Need 5.0 Engine Pics
Post by: ponyman460 on March 23, 2005, 02:31:58 PM

Thanks!

Title: Re: Need 5.0 Engine Pics
Post by: cougarman on March 24, 2005, 07:41:12 AM

Hey Paul, what size belt you running?? (sorry for the hijack) ;)

Title: Re: Need 5.0 Engine Pics
Post by: MasterBlaster on March 25, 2005, 10:16:00 AM

Quote

I don't have any pics of those. Master Blaster has some perhaps? :dunno:

Why does everyone assume that *I* would have... oh, that's right.
Never mind. :hick:

Just a few pics I took after work (1am).
.

Title: Re: Need 5.0 Engine Pics
Post by: ponyman460 on March 25, 2005, 11:20:14 AM

thanks!!! I got it now!

Title: Re: Need 5.0 Engine Pics
Post by: V8Demon on March 25, 2005, 11:30:54 AM

Quote

Why does everyone assume that *I* would have... oh, that's right.
Never mind.

That's right.... You NEVER have pics of stuff...... :rollin:

EDIT: Cougarman, the belt is Dayco part# 5060875. All pulleys are stock size.

Title: Re: Need 5.0 Engine Pics
Post by: ponyman460 on March 25, 2005, 01:42:11 PM

anybody got the belt size for when you delete the smog pump? Its gone, and nothing is there to replace it....

Fox T-Bird/Cougar Forums

General => General Fox T-Bird/Cougar Discussion => Topic started by: ponyman460 on March 23, 2005, 01:10:09 PM