Fox T-Bird/Cougar Forums

i finally got the car today and am in the process of pulling it apart but here is what i have so far...i am in florida 32578

-complete 2.3 turbo motor(include pulleys, harness, VAM, etc, everything to plop it in a new car) $600
i'd prefer to sell it whole first, if no takers then i might part the engine. i you buy the whole motor i'll throw in the puter for free :D
-t-5 trans  $200
-complete rear disk to disk(i'll include e-brake as well)  $250
- horn button w/spring(unbroken) $20
- rear lights (left has small crack along red reflector, other is dirty but uncracked) $50
- Ride control computer $40  ABS computer $40  i have 2 each
- interior ttrim panels $10 each
- passenger electric mirror  $15
- seats faded on top but good shape otherwise 2 full power drivers and i non power passenger...make an offer
- tripminder $20
-dew wipes 2 pair inside and out great shape $20 each
-quarter window t-bird emblems $15
-nose bird emblem $20
-drivers window motor  $30
-door skins minus straps $20 ea
-hyrdobooster $50
-sunvisors no fading  $20 ea
-trunk trim pieces(good shape) $20ea or i'll make a deal on the while set
-instrument cluster $20            instrument surround(1 tab broken) $15
all prices plus shipping unless it's small

new stuff added

Any chance the front bumper cover is intact?

nope...that where it took the hit.

Does it have a good headlight switch (no flashing lights)?

Not sure what you mean but I have 2 headlight switches. They both have only the the one panel dimmer dial. i checked them before  i pulled them and they worked....you want a pic?

They apparently have a breaker built in and when they go bad they do weird things...like on mine when you use the fog and headlights both at the same time, after a few minutes they will both begin to flash off and on

Thats good to know.  As far as i know they are fine.  For an extra 3.99 you can double your order and get a 30 minute warranty. Just pay shipping and handling.:D

The rubber that the window fits between in the door, can't think what you would call that, I need a good no cracks or tears for the drivers side window.

Switch it is. Where do I send what???????

88 turbo...PM sent.

I thought you were making up Niceville...Do you still have the driveshaft?

I'm 88turbo but anyways...  do you have the lower portion of the drivers side window track?  its a channel about a foot long with part of the window guide.  its inside the front of the door.

lol

meh, you guys all sound alike.:shakeass:
yes i have a couple of those and they are GTG. A PITA to get to though.

if I was gonna make something like that up it would be more like hoteasywomenwithfrikkinhugesandlonglegsville.
i have 2 driveshafts, one is from an auto car(in the garage) and the 5-speed version is still on the car. Are they different...not sure.

more stuff to add
-steering column w/wheel $15
-stock aircleaner $10
-k&n filter for above(used 1 week) $10
-widow washer bottle $15
-fuel pump hangar  $10
-fuel level sender $10
-mechanical heater control $10
-glovebox x2 (1 red, 1 blue) great shape $15

thanks for lookin'

how much for the fuel level sender and the window guide shipped to 67005? thanks

I could use the driver's side kick panel and the hood release cable. How much?

Mayhem PM sent.

88 turbo, here is a pic of the passenger side window channel...i assume they are different?

that is what I am after but I need the drivers side and yes they are different.

lots of this stuff is still for sale if anyone's interested.  :D

Consider the rear end sold unless it rusted up bad or something. I can't get over there to pick it up until the 24th though. Be glad to send a deposit by Postal Money order if that's a problem, PM me and we'll discuss. I'm about an hour away.

dooda....Pm sent

do you have the pass side door trim w/ the turbocoupe emblem in it?  Mines mangled and doesnt want to stay on my car

yes I do.  I wont be able to get to the car til the 25th though, if thats OK.

Thats fine.  If you can get it off without wrinkling it.  I hear heat and a piano wire work.  I used a putty knife with a heat gun and mangled it:(  And every set I've bought, its always the pass side thats wavy.  Gimme a price for it

was the hood hurt in the crash?

88 turbo, i have a perfectly good hood...black.

Hi! Do you still have the tripminder and does it come with a pigtail?
If so how much to ship to 49250

Thanks

sorry man, that is gone.

need a pair of inside dew wipes-get back to me-salrock

PM sent.

retracted

All is well.

All, i apologized to Vinnie for a misunderstanding. Not cool on my part at all.

Salrock, i only have the passenger side left.

Accepted,back to business as usual.

Vinnie, seat pics.  The seat belt trim is cracked and the seatbelt holder is broke. I have a pimp red one to replace it.  The electrics are good though.

Is that a passenger or driver side?

drivers side

How much shipped to 73401?I have shipped them (unbolted the back from the bottom and layed them flat together),but don't remember how much it cost.

Gimme a couple days, I just started some college classes that's taking up alot of time. What did you ship it in....like lay it on a pallet?

I removed the seat track (he didn't want it,I don't need one either),unbolted the back from the bottom,layed them together,wrapped them up really good in plastic,shipped it.It really was less than expected.

man i'm glad you mentioned the seat track, i was gonna ship the whole thing!

Hey Do you still have one of the glove box's and does the latch work? and would you have the driver's side rear quarter pbuttstuff trim that goes behind the wheel well? how much  would both be to ship to 39465?

Just let me know when you can,I'm easy to find.

Rare breed, i have both items you want. I have a blue and red glovebox, both in excellent shape. I will be up to the car this Sunday so i will get the trim and give you a quote Monday/tuesday if thats OK.

yeah that is ok and i am also interested in the top half of the rear seat the top half of my rear seat is the one that doesn't have the neck supports and the arm rest.

rare....you got PM

Any news on the seat?

vinnie, no sorry. i couldnt escape work in time to get to the UPS store. It's broken down and ready to go so i'll get over there first thing in the morning.

No hurry at all,just checking.Oh,one more question,it is a raven seat,right?It looks like mine in the pics.Thanks,and remember,no rush,just whenever it fits into your schedule.

freightquote..... just call the guy and ask for a price to ship a car seat. can't hurt to see.

freekin crazy stuff lately man. Getting ready to call it quits after 23 years in the AF so I am pushing to get a degree before I get out and TRYING to save some $$.  I got a big paper due monday and Sunday i am sellin the motor/trans to a dude and we got to pull it then... the money is  good but I am going to regret it i know as i want a spare.
  I am gonna take some pics of this dudes garage if i can cuz it will make you cry.  dude has some amazing stuff in this po dunk place called Jay Fl....68 shelby gt 500, big block cougar eliminator, 64 fairlane and on and on.  He's got a 64 ranchero for sale, tubbed and all for $2k.

can you sell me the ecu?

do you still have-a pair of inside dew wipes- if so -sold

i have the EEC...$60 including shipping.

any luck on that hood? :D

PM sent.  I didnt get to it today but I PROMISE to get it when i go up next. 2 weeks MAX.  Thanks for the patience.  By the way, did you want the under hood ducting as well or just the scoops?

I wont have any use for the ducting but thanks for asking.

Do you still have the altenator? Plus the drivers side window motor?