Text only | Text with Images

Fox T-Bird/Cougar Forums

Marketplace => T-Bird/Cougar Parts & Cars FOR SALE => Topic started by: Haystack on November 27, 2008, 11:49:14 PM

Title: Parting out 87 bird.
Post by: Haystack on November 27, 2008, 11:49:14 PM
I'm parting out a 87 bird. It has good taillights and head lights. I need the inner park ones that go against the grill. It had a 5.0 in it, I may or may not keep the motor mounts unless I get a decent offer on them. Interior sucks, minus the dash. Standard dash cluster, 122k miles. Good doors, trunk and fenders with minor dents. Car is a light green in color but was initially white. I will be stripping it tomorrow or the next day, and can get pics of anything you might need.
Title: Parting out 87 bird.
Post by: Turbo 88 on November 28, 2008, 01:02:50 AM
Are the headlights clear, or opaque like mine?
Title: Parting out 87 bird.
Post by: jpc647 on November 28, 2008, 01:07:24 AM
Are any of the engine related compents in it? Or the engine harness. Was it a floor shift?
Title: Parting out 87 bird.
Post by: Haystack on November 28, 2008, 02:08:49 AM
I can sell some engine parts, but the bulk will be going into my new bird. Engine harness would be alot of work, and it was colum shift. The headlights are old and would need to be re-finished.
Title: Parting out 87 bird.
Post by: cougarman on November 28, 2008, 06:36:55 AM
How's the grille?
Title: Parting out 87 bird.
Post by: Turbo 88 on November 28, 2008, 12:48:59 PM
I should have asked before, but is the front bumper cover the same as on my TC?
Title: Parting out 87 bird.
Post by: vinnietbird on November 28, 2008, 05:22:55 PM
How much for the driver side taillight shipped?
Title: Parting out 87 bird.
Post by: jpc647 on November 28, 2008, 06:33:45 PM
Are the transmission lines still in it? Can you tell me how they are routed?
Title: Parting out 87 bird.
Post by: Haystack on November 28, 2008, 09:46:08 PM
the tranny lines I broke last night from pulling out the old engine sorry. I didn't get to the car today, had some stuff at home to take care of. I'll get everyone pics of everything tomorrow. Vinnie, I'm not sure how good of shape the tail light is in, but I'll send you a pm asap after looking at it.
Title: Parting out 87 bird.
Post by: Haystack on November 28, 2008, 09:47:15 PM
not sure if the bumper cover is the same as a tc, but I will send you a pic. Also, if you pay shipping, I'll give it to you for free if you find out it works.
Title: Parting out 87 bird.
Post by: vinnietbird on November 28, 2008, 10:10:14 PM
The TC and standard Bird uses the same rear bumper cover.Just the red or chrome trim is different,and that is stick on stuff.
Title: Parting out 87 bird.
Post by: Haystack on November 28, 2008, 10:19:45 PM
he said front bumper...
Title: Parting out 87 bird.
Post by: vinnietbird on November 28, 2008, 10:41:32 PM
I misread that.
Title: Parting out 87 bird.
Post by: Haystack on November 28, 2008, 10:53:51 PM
So its different then?
Title: Parting out 87 bird.
Post by: Beau on November 28, 2008, 11:12:42 PM
Quote from: Haystack;245234
So its different then?

Yeah...unless you have/had a TC bumper on there...

Any chance the fuel lines are intact and feasible?
Title: Parting out 87 bird.
Post by: Haystack on November 28, 2008, 11:22:42 PM
what extent of the fuel lines? I do believe they are all there front to back. I would like to keep the fuel rails to make the swap easy when summer comes around.
Title: Parting out 87 bird.
Post by: Beau on November 30, 2008, 03:53:25 AM
i just need from the tank forward to the disconnects in the engine bay, but I need it all uncut...i dont need the fuel rails :D
Title: Parting out 87 bird.
Post by: Haystack on November 30, 2008, 04:50:43 AM
I'll see what I can do. Just so everyone knows, had some more new dad issues come up today. I'll be going over to it tommorrow.
Title: Parting out 87 bird.
Post by: LXBird on November 30, 2008, 12:40:43 PM
how much for the passenger side tail light shipped to Dorchester Ontario? N0L 1G1
Title: Parting out 87 bird.
Post by: Beau on November 30, 2008, 03:16:47 PM
Quote from: Haystack;245438
I'll see what I can do. Just so everyone knows, had some more new dad issues come up today. I'll be going over to it tommorrow.

Hey man, I know all about these dad issues, I'm in no rush on the lines. Let me know when you get them, and I'll PM my addy for the shipping.
Title: Parting out 87 bird.
Post by: Haystack on December 01, 2008, 10:32:46 PM
I screwed up the fuel lines... There good to the fuel filter from the engine. The one that bypasses the filter I acidentally cut trying to get it lose.

Also, Vinne, your tail lights has some pretty good spider webs on it... If you need something to get by for a while it will work, but it would look shiznitty with new paint... I'll get pics for everyone else tomorrow. I'm working in two hours and just got home...
Title: Parting out 87 bird.
Post by: jpc647 on December 15, 2008, 10:46:02 PM
Do you have the coil? How much shipped to 01581?
Title: Parting out 87 bird.
Post by: vinnietbird on December 18, 2008, 12:05:23 PM
Is the rear driver side fender trim piece in good shape?I can't find mine ANYWHERE.I also ned the c-pillar birds with the fasteners.PM me.
Title: Parting out 87 bird.
Post by: Haystack on December 18, 2008, 06:18:09 PM
Hey sorry guys... I sold the car to a mustang guy with an extra 460. I thought this thread was dead sorry.
Text only | Text with Images