I have made plans to remove the drivetrain and all related parts, rebuild the motor to H.O and beyond specs and transplant it into my 89 Mustang.
I already have all the front accessories removed from the motor and I am getting it ready to be removed.
I am now looking to possibly part the car.
Does anybody need parts?
List what you may want or need, I'll tell you if those parts are worth buying.
I know that many of you are cursing my name right now but between all my other items on the burners and the condition of the car (it's fair, but would need far more then what I am honestly willing to put into it) this is the direction that I feel I need to go.
I will not be looking to make a fortune here and I will remember the help that some of you have extended to me when I was looking for parts. I'd just like to help out my funds a lil for the rebuild/swap project.
If anybody somewhat local to me (Asheville, NC) would be interested in the rolling chasis before it gets plucked apart let me know. If not, I'll gut it and to the s yard it will prob go to make a few more extra bucks.
I need the lower A frames.I don't care about the condition of the bushings or ball joints.How much shipped?
Are you keeping the engine harness? Most usually people use the engine harness form the transplant car. If not I need the harness! The injector harness won't help me as I'm not using an H.O. motor. Please let me know.
John
If the fuel lines are complete and uncut I'd sure like to know what you'd want for them. Thanks! :D
I kinda need to keep this a roller for now. I'll let you know if that changes.
How are the outer marker lights and taillights ??
What color is the car inside and out? any pics?
Leather-wrapped steering wheel by any chance? If so is it in good shape and not cracked and sun-baked?
Probly gonna swap those if I go FI.
It's wasted... sorry :mad:
Exterior- Grey...Paint is shot... Very little rust..
Interior- Grey... Needs a cleaning but I'd rate it a 6-7 outta 10. Lots of decent parts.
I can try to get some pics.
Prob gonna keep that unless I go carbed. I'll let ya know.
Outer markers are a lil hazed but would clean up. I spent like 5 mins on them with some walmart cleaner and that made a drastic difference.
The tails both have small cracked areas. Not useable really.
D'oh! No worries, I always check never know when youll run across one! Thanks for checking! If by any chance mcb82 backs out on the markers can I be next in line? :D
Are you refering to the orange side marker lights at the headlights or the fender trim lights?
I'd be interested in both of the front seat covers.
Replied ;)
TTT..
Sorry guys.... been having family troubles and have not been on much.
I'd like to make a serious effort to get some parts sold..
Nothing has gone out or been removed yet..
LMK what ya might need.
Pics?
I mean the front headlight-mounted turn signal ones, not the "cornering lamps" in the black fender trim itself.
Slightly fogged but I believe they could be restored.
I'll get some pics with my cell cam tomorrow.
Still got those seat covers?
Also the door cup inserts by the handles (extras are a good thing :hick:)
Does it have cornering lamps... if so i need a passenger fender.. a little rust is ok..
I do... I know I have been slacking. I am sorry. I am gonna take pics this weekend for sure.
The cups are not in the best shape. I'll take pics of those too.
No cornering lamps.. sorry
Dont meant to hijack but since you said extras...
If you want another extra I have a pass side that is unbroken...
I have two pairs of gray ones left,and I'm keeping them.They are almost made of unobtanium.
LMAO.....
I have pics on my cell..who wants pics of what?
e-mail addresses and I will send them off.