As the title stated,70mm Mass Air meter/sensor $35.00 shipped.
for what year?
It's identical to the one I'm using on my '88 with Mass Air,5.0 H.O. with mods (see my signature below).If you do the Mass Air conversion on one of our V-8 cars,you should be good to go.
i know you're all about the fox, but what would this do for my mn12?
Probly nothing since the MN12's are larger then that from the factory LOL.:D
I take it this was off a 93' Cobra Vin?
Same size,different sensor than a Cobra.Cobras had 24# injectors,this is for 19#.
Vinnie...I'm interested in your meter. Can you tell me the part # on the sensor? Do you know if this meter works ok?
It worked fine when i pulled it a few weeks ago.I bought it from a member here last year..I took it off my car and installed another that I polished up.
Just a tip but if you use a 70mm MAF housing from a 94-95 Mustang, 92-95 Crown Vic, Grand Marq, Town Car, or the housing from a 94-95 T-bird/93 Cobra you need to use the MAF electronics with a F2VF part number. If you swap in the stock 55mm MAF electronics you will run lean because the sensor is not compensating for the 70mm diameter. Lean=not good.
This sensor came with the meter,not a problem in the Sport.
Vinnie...I sent you a PM
Got it.
Then you should be fine ;)
Soooooooooold !!!!!!!