Text only | Text with Images

Fox T-Bird/Cougar Forums

Technical => Body/Appearance/Interior => Topic started by: vinnietbird on July 19, 2008, 10:13:58 AM

Title: Quick clutch pedal assembly question.....
Post by: vinnietbird on July 19, 2008, 10:13:58 AM
On the assembly,there are two red wires on the left side,and two black wires on the right side.What are they for?I'm still unbolting everything to do the swap.I'll check for an answer to this in a little while.I'm out.Oh,one more thing,what is the vacuum hose for that is connected to the assembly?
Title: Quick clutch pedal assembly question.....
Post by: Kitz Kat on July 20, 2008, 07:01:11 AM
The vacume hose is for the cruise control.
Title: Quick clutch pedal assembly question.....
Post by: vinnietbird on July 20, 2008, 06:43:29 PM
Man,I'm learning all kinds of things doing this swap.Thanks.
Title: Quick clutch pedal assembly question.....
Post by: vinnietbird on July 25, 2008, 06:16:21 PM
How do you adjust the hose "switch" to the right position?
Title: Quick clutch pedal assembly question.....
Post by: vinnietbird on July 25, 2008, 06:17:29 PM
Is it to where the button is depressed when the brake pedal is not in use,then when you push the brake,it lets the button out thereby turning the cruise off?
Title: Quick clutch pedal assembly question.....
Post by: 1WLD BRD on July 25, 2008, 06:32:01 PM
Quote from: vinnietbird;229039
Is it to where the button is depressed when the brake pedal is not in use,then when you push the brake,it lets the button out thereby turning the cruise off?


bingo....
Title: Quick clutch pedal assembly question.....
Post by: vinnietbird on July 25, 2008, 06:33:55 PM
I'll make the final adjustments tomorrow after work for that switch.Now,can you answer my other questions that I have on the drivetrain thread?
Text only | Text with Images