Print Page - Parting out: 1986 Cougar XR-7 5-spd

Title: Parting out: 1986 Cougar XR-7 5-spd
Post by: jeffteats on July 11, 2008, 05:01:10 PM

I have decided to part out my baby, little too much rust in the wrong places. Car has lots of good parts on it and will be reasonable on the prices. Would rather see the parts get reused than thrown out. The car was gray with charcoal interior. Any questions you may email me at cougarxr71986@verizon.net. Thanks, Jeff

Title: Parting out: 1986 Cougar XR-7 5-spd
Post by: vinnietbird on July 11, 2008, 06:19:36 PM

Yo Jeff,throw up some pics.A couple of the interior,and a few of the body,trunk and engine shots so we can see what we can use.

Title: Parting out: 1986 Cougar XR-7 5-spd
Post by: BEARMAX on July 12, 2008, 02:48:44 AM

vent windows?

Title: 1986 cougar
Post by: salrock54 on July 12, 2008, 09:19:58 AM

jeff- need 5 speed console plate, driver side door lock plate,driver side tailight.

Title: Parting out: 1986 Cougar XR-7 5-spd
Post by: DVP on July 12, 2008, 11:45:39 AM

does it have dual power seats? If it does i need the contol plate on the console. I need the console for sure though with the lid. foglights and brackets, tail lights if in good shape. turn signals in bumper and the corner lens by the headlights. sunvisors if in good shape, arm rest covers, pull strap clips, think that is it.

Does it have the fender marker lights or not? if it does i need thouse and the trim around them. Think thats it

Title: Parting out: 1986 Cougar XR-7 5-spd
Post by: jeffteats on July 12, 2008, 05:37:08 PM

Yes it has vent windows, actually have a nice set of rust free doors with vents I got for the car. And also for faster response if you email me it would be quicker for me to get back to you. As for pictures of the car, not much to take a picture of, fenders are off, interior is out of it, and bumpers are off. Was stripping to restore when I found the rust and no parts to replace them.

Title: Parting out: 1986 Cougar XR-7 5-spd
Post by: cougarfan on July 12, 2008, 06:03:55 PM

does anyone know if the header panel between 83 and 86 cougar are the same and if they are how much you looking for and maybe drivers fender

joe

Title: Parting out: 1986 Cougar XR-7 5-spd
Post by: jeffteats on July 12, 2008, 06:30:13 PM

Believe the header panel is different, the cat is a flat piece on my 86 and the 83 was a standup one. I could be wrong though

Title: Parting out: 1986 Cougar XR-7 5-spd
Post by: Ductape91 on July 12, 2008, 08:25:49 PM

do you still have the console itself and the brackets for it?
if so can you send me some pics

thanks

Title: Parting out: 1986 Cougar XR-7 5-spd
Post by: Kitz Kat on July 13, 2008, 10:00:45 AM

Hows the steering wheel?

Title: Parting out: 1986 Cougar XR-7 5-spd
Post by: chas jr on July 13, 2008, 04:31:08 PM

According to the parts interchange on this site the header panels will work 83-86

Title: Parting out: 1986 Cougar XR-7 5-spd
Post by: cougarfan on July 16, 2008, 08:04:53 AM

thanks chas
jeffteats if you could send me a picture or post one of the header panel that would be great

Title: Parting out: 1986 Cougar XR-7 5-spd
Post by: DVP on July 16, 2008, 01:42:14 PM

They will work but you wont have the stand up cougar anymore

Title: Parting out: 1986 Cougar XR-7 5-spd
Post by: TommyT on July 16, 2008, 04:45:56 PM

Just curious to know if it has a factory installed pop-up roof. I need the attaching hardware that's closest to the windshield.

Tommy

Title: Parting out: 1986 Cougar XR-7 5-spd
Post by: 85cougar on April 08, 2010, 09:57:06 PM

is the header panel still available

Title: Parting out: 1986 Cougar XR-7 5-spd
Post by: 88turbo on April 08, 2010, 10:00:39 PM

Quote from: 85cougar;317521

is the header panel still available

might want to check the dates of some of the posts this was about a year and a half ago...:punchballs:

Fox T-Bird/Cougar Forums

Marketplace => T-Bird/Cougar Parts & Cars FOR SALE => Topic started by: jeffteats on July 11, 2008, 05:01:10 PM