would like to trade an 80 gb ipod with music for gt-40p headers. i'm kinda tight on money as of late, but need the headers to complete my engine build. i can't get online often lately, so my number's 850 890 6265 and i live in marianna, fl. thanks.
bump! update, seeing as i live in austin, tx now, but the number's still the same. i'm sick of burning spark plug wires. :/
somebody? anybody? i'd much rather buy from someone on here than ebay.
I have a set but, uh, I'm using them ;)
Just to let you know if you end up using the FRPP ones you will have to grind the top of the driver's side motor mount down a bit. I had to do that to get mine to fit.
I'M trying pacesetter shorties the rear drivers cylinder tube needs to be modded, with autolite #605 plugs,and 90* boots...got them on the 'coug, the stock car has '69 351w stang manifolds *modded, cast has to be ground off*
BBK shorties also work, with 90* boots. The tubes come out away from the head, then turn down. :burnout:
3rd back on the driver side looks close. How is the clearance on it?
I that wire mesh I see?
they do look close, but not as close as the stock headers. lol. yeah, i got me some bbks like those, so those pics make me feel a bit better about things. :)
bringing an old thread back from the dead.. wow.
Just the camera angle, it's tight but there is room.
???
Duh...lol, :hick: yea that's a piece of expanded metal that was laying around the garage. :D
Plans for this metal?
Which headers are those? BBK 1 5/8?