after 3months its back on four wheels!
the light is really bad in the barn
before
(http://i96.photobucket.com/albums/l178/winkysrides/car/88b3.jpg)
after
(http://i96.photobucket.com/albums/l178/winkysrides/car/100_1398.jpg)
(http://i96.photobucket.com/albums/l178/winkysrides/car/100_1384-1.jpg)
I know I need to fix that rust
(http://i96.photobucket.com/albums/l178/winkysrides/car/100_1396.jpg)
I hope my slicks dont grow
(http://i96.photobucket.com/albums/l178/winkysrides/car/100_1397.jpg)
(http://i96.photobucket.com/albums/l178/winkysrides/car/100_1381.jpg)
The gutting has stated
theres 1 panel in the back, the old fuel lines and the junk in the fenders wiper fluid tank ex *not sure if on going to take the sway bar off or not and im keeping the doors untill I have money for lexan
What do you have under the hood and what times are you shooting for?
Does it have a cage? Nice looking drag bird. VIDEOS ARE A MUST WHEN SHE HITS THE TRACK!
right now its going to have a 302 roller with a e cam 1.6 roller rockers gt40 heads and a 650 or a 700 holly carb im going to try both but im thinking the 700 will be a bit big.
I also have a c4 with a 3500 stall cov and a 9in out back with 4.56 gears. Since this is my first year im not looking for any big times im just learning
but im saving my moneys to make a 351 stroked and twin turboed
no cage yet but it will as soon as I get 1500 up im going to http://www.rigidracecars.com/ to get my cage and subframe and a mini tub and torque box strengthened.
I plan in having 3 cams 1 in the bumper 1 in the cab 1 out side the you tube is going to be crazy
my motor ran 11s in a fox gt with 3.73
I have been bulding /buyying this car for 3 years thanks to a py job at kroger and a bitch girl friend. now I have a better job and a hotter girl friend thats bigger into cars then I am (its kinda scary) so this is the year im going to try for may 22TT at kill kare (before the cage)
They will but the also get narrower as they grow.If thats a 28" tire you should be ok ive ran 28's for a while with no problems
Just wanted to give you this link to a great digital cam setup.
http://www.vholdr.com/ (http://"http://www.vholdr.com/")
Check it out, the vids look really good to me!
update 10/21/08
the motor it in everything hooked up BUT my flex plate it to small ..so out it comes again....
:ttiwwp:
right you are
(http://i96.photobucket.com/albums/l178/winkysrides/car/100_1578.jpg)
(http://i96.photobucket.com/albums/l178/winkysrides/car/100_1579.jpg)
(http://i96.photobucket.com/albums/l178/winkysrides/car/100_1421.jpg)
(http://i96.photobucket.com/albums/l178/winkysrides/car/100_1423.jpg)
(http://i96.photobucket.com/albums/l178/winkysrides/car/100_1424.jpg)
looking good!!!
makes me think I might wanna use my mark I have now as a drag car, and have one drag and one DD...
I took about 250+ lbs out of the cougar and i thought i was gutting it for a drag car it looks good keep it up man.
tonight = FIRE IT UP!!!
all i have left to do is tighten the fuel line, bolt in the starter and get the plug wires in
Great stuff!! Thanks for keeping us up to date
1st time since 07
(http://i96.photobucket.com/albums/l178/winkysrides/ponciac/thunder/88birdhood.jpg)
i got the hood on
but i had to cut the hood reinforcement to make the air cleaner fit
tuck the wires, and wire the dash
wait for money to buy a seat track and go racing
Let us know how it runs
Lets get her fired up !!:burnout::burnout:
http://www.youtube.com/watch?v=dA9UEh6v25A
ill get a better one later she was cutting out due to a vac leak
Still need a track? I have another one. Let me know if you do.
Cool, always neat to see T-Birds at the dragstrip!
Roger