graphic equalizer wanted for 88 XR7 w/prem sound and amp.
E6SZ18T803A replaced by F29Z18T803A. original makes radio
crackle. yhe one i bought from ebay has a bad power switch.wont stay on. this also is a mustang part [87 up]. will also take other
prem sound parts .--irv toms
815-734-4033
irvsab@verizon.net
hold power swtich down with a paper clip works well 90% of the time.
I may be able to find one Saturday.I'll check.
vinnie has everything but use a paper clip for a few days while vinnie gets you a better EQ.
there are no yards left in my area with the 80's stuff left.
s is so high everyone is getting rid of their cars.
probably rust free parts in Ok. too. thanks.--irv
I got the amp out of my 92 Mark VII im parting??? Im sure its similar if not the same.
Rust?What's is this "rust" you people keep talking about?
i have one pulled and tested needs a lil cleaning i can get pics if needed
would be interested in any or all.pics are nice. cant find
a part # for the mark G E. so i cant tell for sure. thanks!
--irv
Ill get mine pulled today and get a part number and pic for you..
You can disassemble the eq and permanently connect the power switch - I did this 'till I found a replacement on EBay (it also had the cracklin' rose thing goin' on). Then the USPS guy left it delivered in an open mailbox and it got blown onto the road and runover by a car :( I put in a claim and the bitch at the office hung up on me when I told her that he definitely didn't put it at my front door and couldn't have blown 50' perpendicular to the wind that day and through a stone wall. Anyway, I don't use USPS any more as they would not honor the insurance claim! Now the jackass leaves a slip saying he attempted delivery even though I am standing in my driveway watching him drive by. ****in' rednecks up here - I sware I'm gonna report them to the Postmaster General once I get enough evidence together.
Luckily I found another one on Ebay with a working switch.
well you wanted pictures here they are http://www.cardomain.com/ride/2434768 last 2 pics ont he page from the 88 cougar LS that im parting out... let me know what you think im sure we can work out a deal
Eric
Here is the Amp out of again my 92 Bill Blass I am parting. Part number F1VF-18T805-BA. Here are some pics.
(http://i188.photobucket.com/albums/z14/cougar1car/amp.jpg)
(http://i188.photobucket.com/albums/z14/cougar1car/amp2.jpg)
(http://i188.photobucket.com/albums/z14/cougar1car/amp3.jpg)
I got a shot of the plugs on either side so you can make sure it is the same.
mine is marked E7SF18T803-AA , is shorter and has a flat
male plug w/2 rows of 5 wires per row.2 5/16 high x7 wide,
and 2 7/8 deep. looks identical to the 87 up mustang one
on the outside. thanks for the help so far.
also has 2 mounting tabs on the sides about midway back
with 2 holes per side.--irv
I may have a couple of these tomorrow from Turbo Coupes.
cant have too many.--irv
No dice,sorry.I gave it a shot.On another note,were you needing a trunk seal?
nope. just the door lock buttons. thanks--irv
irv.... just for your info ive got an 88 cougar LS thats being stripped atm of parts
In the same situation you are... Blows.
I've got the doorlock buttons.
let me know how much and where to send again vinnie.
eric ill take the eq.give me info.--irv
thanks
Irv,is it just the buttons (with their little harness),or the switches and the plastic door inserts for them?
have never had mine out of the doors. these were to
be spares. dont know if they are connected but they are
side by side at an angle towards the frt 1/2 of the door
panel. square. one say lock. other says unlock. in white.
hope this helps. --irv
to the frt of the inside door handle and the cups i got from
you.
are you talking about the actuators below the latches too?
I was wondering which switches you needed.Like a Turbo Coupe,or standard door panel.
to be honest im not sure what a tc panel looks like.
i have an 88 XR7. they are in front of the door handle
and on an angle down sticking out away from the door.
arent the tc's angled up and higher than the handle?
i think the buttons are different too.dont have a tbird
brochure to look at.
I believe I have those switches.I have the same kind you do.I can't remember if the lettering is rubbed off or not.If you still need them,let me know.
what else are you talking about.what other pieces do
you have. will take the buttons.
How about $10.00 shipped for both sets.I'll get the switches out for you.Don't send money until I find both sets.I know where one is,and pretty sure where the other set is.I'll be in touch right after work tomorrow (after my haircut).
If u r looking for a EQ I got one just sitting around which works :S... 30 including shipping.
ive got a haircut tonite too[slow day not much to talk about]
wish i could type w/all my fingers.did you have other door lock parts
that you were talking about? im in no hurry these just get put away.