Fox T-Bird/Cougar Forums

Technical => Misc Tech => Topic started by: billboehm on April 08, 2008, 12:58:06 AM

Title: maf sensor
Post by: billboehm on April 08, 2008, 12:58:06 AM
i think the maf sensor on my 95 4.6 cougar may be out. will the one off my 93 3.8 work on it? i pulled it put from the intake tube to which it's mounted and both filaments are fine.
Title: maf sensor
Post by: softtouch on April 08, 2008, 01:12:34 AM
Do you have a code that is pointing you to MAF?
Title: maf sensor
Post by: V8Demon on April 08, 2008, 09:54:23 PM
Check the other thread you asked this question in.....
Title: maf sensor
Post by: TurboCoupe50 on April 11, 2008, 08:30:27 AM
No one here really knows for sure... You'll probably get replies they're all the same, but I know different... Try it and see, IF it runs OK and doesn't throw a code then it's prob OK...

As I mentioned in the other thread, a 5.0 Stang meter will not work properly on a '95 4.6... It did at least run on that meter(till the weather got cold)... When the original failed, it would barely idle... In contrast, a MAF from a '96 4.9L E-250 Van works fine(with a connector change) on the '93 4.6 Grand Marquis... Guessing it possibly would have been OK on the Bird, but mounting is different and I didn't want to hack it up...