OK guys and gals, I'm really getting this stuff cleared out now. All of the new stuff and ABM stuff for use in reproductions has gone to Santana, and the parts car is gone. I basically have the shed full of my personal "stash" left and some body parts. Most of this stuff is also advertised on craigslist and evilbay (for more $$$). If any of you want them, I will pull ads/end auctions early, even for much less money just to see the stuff go to good use. Prices don't include shipping.
I'm in Kelso, WA just off of I5, and there's no way I'm shipping these body parts, but I'll gladly drop them off and some shipper's warehouse and they can pack them.
87-88 TC header panel, no lights, repaired - $25
87-88 TC header panel, with inner lights - $75
87-88 TC front bumper cover, with foglight brackets and wiring, and correct front plate holder - $75
87-88 TC hood w/scoops and ducting - $75
Or take all 3 of the above ^ for $200 obo They're all Shadow Blue, but need paint.
87-88 passenger front fender w/cornering light hole, dent in front, no rust - $10
87-88 TBird decklid, no lock, no rust - $10
87-88 Shadow Blue full console (fits all years) with cubby and wiring - $10
PAIR of 87-88 TC spare wheels/tires, slap tires on them and have skinny's for drag racing - $20
84 TC hood (flat one, same as all 83-88's), no rust, no dents - $25
pair of 87-88 TC doors, silver, no rust, some dings, good glass/motors - $25/pair
pair of 83-86 TBird doors, silver, full-length glass, driver's side has no motor and the glass is out, no rust - $25
85-88 aluminum dash face and radio surround (for full-length center console), very nice, no broken clips - $20
87-88 TC rear sway bar, fits all fox Birds/Cats - $5
87 Sport AOD driveshaft - $5
87-88 TC upper/lower intakes with throttle body - $35
85-86 TC/85-86 SVO upper/lower intakes with throttle body - $30
83-86 TC/84-86 SVO valve cover - $15
87-88 TC valve cover (was fully polished at one time, easy to polish back up) - $15
8? valve cover (ribbed like the 87-88 TC but has a flat nose and says "2.3 EFI turbo" on it) - $15
87-88 TC brakes (pair of front calipers, pair of rear calipers with 1 spare, all brackets/dust shields/sliders, etc, the 11" front discs (bad), proportioning valve, ABS sensors, brake hoses) - FREE
A TON of interior parts, 4 PAIRS of door panels, center consoles, rear panels, trim pieces, kick panels, dash pieces, clips/hardware, etc, etc. Mostly 87-88 TC style in Scarlet Red and Shadow Blue, some tan and Smoke Grey 83-84 stuff, $1-$10 depending on the size of the piece.
I'm trying to have all of this stuff gone by April 1st. Anything that isn't sold/given away by then will be donated to a junkyard, but I'd obviously rather see it all go to good people that care about their cars. I'm VERY flexible on prices except for the TC nose setup, I know that'll bring a little money and I could use it to pay for all the shipping/packing/etc that it's taking to get rid of all of this stuff.
Pair of red 87 88 TC door panels with arm rests, grills and pockets?
Actually, yes. I have 2 pairs of door panels, 1 pair of armrest, 1 pair of pads (with ?? spare pads), 1 pair of grills (with ?? spares), and 2 pairs of map pockets, 1 pair of pull handles, but I don't think there's any clips/covers.
I'll sell 1 set of everything for $40 plus shipping, I even have a box already. (Shipping will be about $50 DHL Ground)
polished aluminuim radio bezel?
do you have a full console in smoke gray, any interior smoke gray parts. get back to me. thanks sal.:cougarsmily:
kitzdnm,
The TC-style one? Yes, for a full-length console. $20 shipped to your door.
sal,
I have a pair of smoke gray 84 TC door panels, rear panels, and other various interior pieces. I still have the console as well. I have a pair of very nice smoke gray 84 door pulls on eBay right now.
is it a full console? no cracks- smoke gray-in good shape- for t5 5 speed-.price plus shipping to 11716- long island new york. thanks mike.what is you store name on ebay.:cougarsmily:
I'll check the console out and get back to you. Just search "TBird" on eBay motors and you'll see my auctions.
How much is it going to cost to ship the front brakes to 43130?
I'll take it.PM me a place to pay>
That Polished valve cover sounds nice. Do you by chance have any pics?
What would shipping be to 53590?
Search polished tbird valve cover on eBay, there's pics posted.
Any good seat belt reciever covers? I dunno what years/cars have em the same as mine. Color doesn't matter I think I could dye em couldnt I?
I have a pair of perfect Charcoal ones, also on eBay. Search for charcoal seatbelt TBird.
Ehhh thanks I appreciate it, but I'm only lookin for the plastic covers. Saw the price and went WHAT? durrrr then saw it was the whole f-in thing lol oops :hick:
Thanks anyway Mike!
tried to look on ebay for those charcoal seat belt covers, but couldn't find them... unless you removed them already, that's the color i'm looking for
Do you have a center console lid? Decent leather steering wheel? Switch cover for dual power seats?
mike not trying to hyjack
but if he doesnt have parts u need guys pm me i got so much random around i might be able to help you out!
Doubt it but its worth asking
got a horn button for a 88 mustang steering wheel laying around?
Zonda,
It's alright. I don't know if they'll sell for that or not. The last 2 sets on evilbay sold for $22 and $187 so who knows?
mywifeskitty,
PM sent.
xjeffs,
I have a decent lid, no steering wheels (well, I do have an 84 a-frame one), 90% sure of a yes on the switch cover, it's going to be ugly though. Need to buy some decals from Santana ;)
daboss,
Nope. Don't even know what one looks like.
didnt think so
its just this little stupid circle and I cant for the life of me find one!
Would you ship the TC rear sway bar?
Mmmmm... yeah, I guess. DHL will take it and might not break it. Or maybe Greyhound Bus? You find a shipping option you like and I'll do it.
PM on the lid.
Any idea on the size of the package so I can figure out my options? Thanks.
Didnt you always say spare wheels are banned at most strips cause they are weak and break easy?
xjeffs,
I'll get some #'s to you tonight
bhazard,
Yep. The aluminum ones are illegal, these are steel and legal. Though even PIR's stringent tech allowed Ted to use the aluminum ones.
Hmm.. I might be a complete tard, but I cant find it Mike. Do you have the auction #? I'm very interested.
PM Sent with Auction #
do you have full smoke gray console,console for 5 speed- for 86 cougar xr-7/turbo coupe. thanks sal:cougarsmily:
Cool, thanks. I will take it, Mike. Since I boycotted Evilbay a while ago, i dont have an account anymore.... so could you pm me some payment info? I'll pay by M/O or Chashiers check, just need to know the total with shipping and where to send it to. My zip is 53590.
Thanks man, I know with all you've been through lately You really dont want to do all this....Just know that there are still people here who support you with whatever you decide to do from here on out.
Kevin.
Hey, I would also like to get the raven door pulls with the caps and that overhead light you have. Ive been looking for these for a while.
Mike,
Lid me brutha.
Jeff
Sal,
I have the console itself, and I'm digging out all of the other pieces that go with it. Stay tuned, I'll have pics up this afternoon.
Birdman,
PM Sent
Jeff,
You want a picture?
I'm needing the headder panel w/inner lites and front bumper cover are these in good condition? Any idea on cost to ship to 78641? Thanks, Michael.
Yeah, is that OK? I sent you an email address by PM. I'll take your word for it if you say it's in perfect shape.
Hey Mike, did you get my PM??
Hey guys, I am looking for a center console (one that's in good shape) for my 85 Turbocoupe.(5sp) Mine was missing tabs where the shifter and cover went and was starting to crack so I am looking for the cover also. (basically the whole thing)
If someone has the half console that the 6 cyls had I may entertain that also. If I can be picky I am looking for gray or black. I am ready to buy as my new seats, steering wheel and carpet are ready to be installed. Thanks...wasn't trying to barge in just looking to see what was left of your inventory.
Sorry guys, it's finals week and I just haven't had time to think let alone catch up on this stuff. My last one is tomorrow.
Jeff,
I haven't found the really nice one yet, it's inside the house which means it's buried in homework.
Birdman,
No, I don't honestly think I did.
Uncleford,
I have a few consoles, but only one is the 83-86 full-length style (the others are 87-88 style) and it's not perfect by any stretch.
i want a valve cover from the svo shipped to 76179 let me know the price. Oh and the one that says 2.3 liter turbo on it.
Do you have the short style that will fit my year? I am trying to figure out what to do for switches if I leave the console out completely. Thanks for the reply...
1fstcpe, $35 shipped to your door.
Uncleford, the short ones fit perfect, they just don't have the second ashtray that sits on the rear hump by the back seat.
So you do have a short one? Got a pic or two? Thanks
Ok, not a problem mike . I know that these PM s sometimes get lost, so no biggie. I just wanted to say that I'd take a decent valve cover, as long as it doesn't have chips out of the metal and is flat. Its either gonna be polished or powder coated custom, so the paint isnt really an issue. I'll also take a decent dome light and cover, bulbs aren't necessary. I found some pull straps locally, so I'm good there.
OK guys, I'm back from finals so I'll get cracking on all of this.
Uncleford,
I have one in Shadow Blue, pics coming...
Birdman,
Ah yes, I got that one, just didn't read it enough to actually comprehend. I've got a good one for you, and a dome light with lense. Say $40 shipped for both?
Sweet. You can PM me with where to send the M/O to!
Thanks again Mike!
Finals go well? I didnt even know that you were in school!
Michael, I'm still needing a header panel, let me know if you are willing to ship it to me. Thanks
Birdman,
Coming at you. Yeah, after the 3 year hiatus while I was Active Duty I went back to finish off my Business Administration degree. The finals went well :D
fordholic,
Texas? Yeah, I can do that. You have 2 options, DHL for an arm and a leg, or Greyhound bus for about $45, plus the price of the panel.
Uuuumm.... LOL
Just waiting for info on where to send the M/O mike ;)
hahahah ;)
I gots it!