Text only | Text with Images

Fox T-Bird/Cougar Forums

Technical => Engine Tech => Topic started by: Lion-O on February 26, 2008, 04:22:22 AM

Title: Simple question.
Post by: Lion-O on February 26, 2008, 04:22:22 AM
Can i use a fox stang motor and trans mounts. If not, have any1 found a solution to putting polyurathane mount in a cat or bird? (86 ls 5.0 cougar)
Title: Simple question.
Post by: vinnietbird on February 26, 2008, 06:52:25 AM
Yes,you can use tthe Stang stuff.Your motor mounts are the same as the Stang's.The '87/'88's are different.
Title: Simple question.
Post by: Thunder Chicken on February 26, 2008, 08:49:08 AM
No, you can't use the Stang stuff. '86 has the same style mounts as the 87-88, which are different than Mustangs.

So much for it being a simple question :hick:

As for poly mounts, ChuckW makes and sells some very nice 86-88 poly mounts. See his listing in the "Vendor's section"
Title: Simple question.
Post by: TurboCoupe50 on February 26, 2008, 09:53:57 AM
What Thunder Chicken said...
Title: Simple question.
Post by: vinnietbird on February 26, 2008, 05:05:41 PM
My mistake.I thought that the earlier motor mounts were identical to the stangs.I feel like a bad person.I'll go ahead and punish myself for the bad info.I feel so dirty.
Title: Simple question.
Post by: Chuck W on February 26, 2008, 05:33:16 PM
Quote from: vinnietbird;206438
My mistake.I thought that the earlier motor mounts were identical to the stangs.I feel like a bad person.I'll go ahead and punish myself for the bad info.I feel so dirty.


The earlier (83-85) are the same as the Mustangs, the later (86-88) are not. ;)
Title: Simple question.
Post by: vinnietbird on February 26, 2008, 10:13:14 PM
Aaaaah,Now I will remember that....forever !!!!!
Text only | Text with Images