Text only | Text with Images

Fox T-Bird/Cougar Forums

Technical => Body/Appearance/Interior => Topic started by: 32VFoxBird on February 19, 2008, 06:21:13 PM

Title: if mustang seats bolt into our cars...
Post by: 32VFoxBird on February 19, 2008, 06:21:13 PM
then why wont these Holcomb Motorsport brackets? these com up roughly an inch on each side to short to reach the factory mounting points on the floorboard, and according to Eric's site:

Quote from: coolcats.net
Front Seats     All Fox cars, plus 1984-92 Tempo/Topaz , pre-1990
                    Escort & GT/Lynx & XR3

mustang seats should bolt in, but it seems my 88(at least) has a wider bolt pattern. sorry if it's been brought up before, but i did search and couldnt find any info that explained the bolt pattern difference.

on the last pic, the "rusty" spot is where the mounting bolts go in.
Title: if mustang seats bolt into our cars...
Post by: Chuck W on February 19, 2008, 06:25:02 PM
No....Mustang seats bolt to our SEAT TRACKS...not the FLOOR.
Title: if mustang seats bolt into our cars...
Post by: 32VFoxBird on February 19, 2008, 06:29:10 PM
%@*$!
Title: if mustang seats bolt into our cars...
Post by: Red_LX on February 20, 2008, 09:36:37 AM
Looks to me like it shouldn't be too hard to weld a couple pieces on there to make those fit.
Title: if mustang seats bolt into our cars...
Post by: 32VFoxBird on February 20, 2008, 10:45:00 AM
yeah, i know. i was just thinking that for what i paid for them, they should have just bolted up.
Title: if mustang seats bolt into our cars...
Post by: Chuck W on February 20, 2008, 05:08:36 PM
Quote from: 32VFoxBird;205267
yeah, i know. i was just thinking that for what i paid for them, they should have just bolted up.


Well they would if you had a Mustang ;)
Title: if mustang seats bolt into our cars...
Post by: vinnietbird on February 20, 2008, 05:12:27 PM
Quote from: 32VFoxBird;205150
%@*$!


Exactly which cuss word is that?I may want to use that sometime when I'm disgruntled.LOL
Text only | Text with Images