Here it is. I will leave it up here until the weekend before I send it to the Mustang crowd. This is a very complete kit (minus injectors). I ran in the 11's with a H/C/I - very basic car. Pics can be provided.
Thanks
Jim
Vortech V-1 A-trim supercharger – straight cut
8 rib pulley upgrade
-one piece crank/lower pulley
Anderson Ford Motorsports Powerpipe
-newly powder coated
Vortech Maxflo bypass valve
Extra discharge pipe
Vortech FMU w/fuel lines
All brackets are newly powder coated
All hoses, couplings, clamps and bolts included.
Vortech installation instructions.
Will include a 5.0 oil pan already punched and tapped for oil return line.
Final Price Drop Before Ebay
Total kit price is 1800
subtract 100 for chip
subtract 150 for pro-m
subtract 50 for ac&ps bypass
total kit price - 1500 with just maxflow
subtract 150 for maxflow
total kit price - 1350 without maxflow
Vortech kit is sold. Electronics and exhaust are still for sale.
I guess sometimes nice guys do finish last....after holding this kit for two different buyers, both "friends" of mine for multiple weeks each, it is back up for sale.
I have added some things to get the deal done. The complete kit, mass air, chip, smog pump bypass and a custom powercoated A/C and powersteering bypass will be $2000. I can take Paypal so that you can pay with a credit card, but you will need to pay the fees.
Jim
You REALLY should post pics. I know if I was gonna hand you 2 grand I would want some nice hi res pics. Just a tip.
Good point, but it has been packed up since it was "sold". I do have a few. If someone is serious, I will have no problem unpacking it.
(http://i12.photobucket.com/albums/a242/thundr306/vortech/vortech003.jpg)
(http://i12.photobucket.com/albums/a242/thundr306/vortech/vortech001.jpg)
(http://i12.photobucket.com/albums/a242/thundr306/vortech/DSC03316.jpg)
(http://i12.photobucket.com/albums/a242/thundr306/vortech/vortech0122.jpg)
Still got it? I'm SOOO close to saying yes! You're killing me!
Yes, I have it. I actually listed it up on Corral last night. I will also be taking it to a swap meet next weekend. I'd love to sell it to someone on here, so let me know. If you want to talk on the phone about it, I can pm you my number.
Jim
I wish I had the cash(both kids need braces) , but if you would be interested in a trade I have a mint 01 Kaw. Bayou 300 Quad with litteraly only 1 tank of gas run through it, or a 97 Kaw KLR strret/trail with 790 orig miles.
If interested P.M. me I live in wilkes Barre, Pa.
V8Demon-pm sent.
Sorry, no trades, I need some money to pay off other parts!
If anyone is looking to get the kit cheaper, I can knock some parts off the list and save you some $$$.
I here ya!!
It probably wouldn't bother me to much,but your so close.
That's odd.
Basically, we can take some of the add-ons out to make the kit more affordable. I could probably take $150 off and keep the Maxflow, $100 and keep the chip, etc.
You ran the same H/C/I I do now, correct?
With the supercharger, I ran Edelbrock Performer 5.0 heads(small valve), Crane 2031 cam and Edelbrock Performer intake. Car was all motor 12.9's and 11.7's with the Vortech. I was always easy on my car, so I know an 11.5 was in it.
How do you like those heads i thought about those same ones of rmy car but now i want AFRs.
I'll sell you some Twisted Wedge heads!
Might do that after i get my next car together about how much you want send me a PM and you would have to ship it to 79110 let me know sooner or later.
I saw the Trick Flow valve covers....Didn't really get a good look at the intake in your pic at first and couldn't make out the heads at all LOL!
BTW that sweet ass engine bay!!!:burnout:
I have to do some # crunching as I have some brickwork and siding to do on the house.....If an off comes up somewhere else don't hold off on my account. Take it. I won't be offended and I'm not 100% as of yet;)
Sorry to hear that i got my holley system max2 off Ebay lucky for me it only had less than 50 miles on it. Did you pay a lot for the intake to start with even before the work to get it fixed?
I did everything except the coating. Mainly time, which I don't have.
Last chance for the Vortech before it goes out to the swap meet this weekend. Be great for someone here to get it. Like I said before, you could save alot of money by dropping some of the additional parts. Let me know soon!
Jim
Well, I guess nobody carries that kind of money with them to a swap meet. I want this kit gone, so anybody serious can pm me with exactly what they want and I will give discounted pricing!
I'll ask my neighbor down the street to spread the word to his racing buddies for you. Any luck on the corral?
Hey Jim where are you getting all this stuff powder-coated at? I wanted to get the trick flow upper intake I just bought power-coated black. Any idea on what that would cost?
I have tried the Corral for a few items and it just never seems to work out.
I had a local shop do it for me. I would think around $40.
Jim
See first post for new and final price drop before listing on Ebay!
Fixed my math!
Taking offers.
is everything still avaliable instructions and all and whats the damage
I have everything, only because I refuse to part it out until the supercharger itself sells.
Do you want all the parts listed? Where are you in PA? Can you pick them up to save shipping?
I live in Hazleton you mentioned exhaust is that cat back or the whole thing front to back and the supercharger is that for a 5.0 plateform
Hazleton is about an hour and a half from here.
I removed the exhaust from the first post awhile back. Sorry the exhaust has been sold.
Yes the supercharger is for a 5.0.
Ok no problem, so everthing that is listed on the first thread is available is that right? If not shoot me a list via e-mail.
Do I need to make any engine modifications to handle this upgrade(heads,cam,oil pump,ect)?
What injectors are needed to match the mass air sensor?
Vortech V-1 A-trim supercharger – straight cut
8 rib pulley upgrade
-one piece crank/lower pulley do belts come with this
Anderson Ford Motorsports Powerpipe
-newly powder coated
Vortech Maxflo bypass valve
Extra discharge pipe
Vortech FMU w/fuel lines where do these extend from and too
All brackets are newly powder coated
All hoses, couplings, clamps and bolts included.
Vortech installation instructions.
Will include a 5.0 oil pan already punched and tapped for oil return line. what type of pan how many qts(7,8)
Total kit price is 1800
subtract 100 for chip
subtract 150 for pro-m
subtract 50 for ac&ps bypass
total kit price - 1500 with just maxflow
subtract 150 for maxflow
total kit price - 1350 without maxflow
__________________
Yes, I have everything.
Do I need to make any engine modifications to handle this upgrade(heads,cam,oil pump,ect)?
What injectors are needed to match the mass air sensor?
what type of pan how many qts
Sale pending........
About time,Ive been thinking about it every day,just couldn't pull the trigger.
You will be kicking yourself when it is gone....
sold!
He's going to have a nice ride when its all done. Us PA guys should meet up once everyone has their cars together.
Yes he will. One long parts list.
Chances of all of us having running cars at the same time?????
I beter have a running motor by July or I'll flip out. How you making out with the turbo setup? You up and running?
Slowly. I am up and running, but this is my first time using the PMS. I am working on getting a good idle out of it now, so we will see.
If you guys would stop selling me parts I might be done.
LOL, what else have you bought? Did you put that tranny in yet? I'm curious how you liked the 5speed vs. the aod... It's one hell of a mod
go's in this weekend.I"ll let ya know.