Text only | Text with Images

Fox T-Bird/Cougar Forums

Technical => Engine Tech => Topic started by: mikesparks on September 09, 2007, 08:09:18 PM

Title: valve cover breather
Post by: mikesparks on September 09, 2007, 08:09:18 PM
it is pulling oil into the inlet of ther turbo and burning out of the exhaust at high boost what can be done to fix it
Title: valve cover breather
Post by: chri85tc on September 09, 2007, 08:31:26 PM
Get the PCV vent system from Forced4 Motorsports.
Title: valve cover breather
Post by: mikesparks on September 09, 2007, 08:32:14 PM
Quote from: chri85tc;175346
Get the PCV vent system from Forced4 Motorsports.


whats their website?
Title: valve cover breather
Post by: Chuck W on September 09, 2007, 09:39:29 PM
Well, what is the condition of your PCV valve?  Check it.  It could be leaking under boost, thus pressurizing the crankcase...
Title: valve cover breather
Post by: mikesparks on September 10, 2007, 07:56:55 PM
Quote from: Chuck W;175354
Well, what is the condition of your PCV valve?  Check it.  It could be leaking under boost, thus pressurizing the crankcase...


how do you check them ?
Title: valve cover breather
Post by: Chuck W on September 10, 2007, 08:07:55 PM
Pull it out and try and blow through the small end.  NO air should pass though it.  You can clean them sometimes, but it's best just to get a new one from the dealer (USE THE MOTORCRAFT ONE ONLY) as they're cheap.
Title: valve cover breather
Post by: mikesparks on September 11, 2007, 12:44:18 PM
Quote from: Chuck W;175529
Pull it out and try and blow through the small end.  NO air should pass though it.  You can clean them sometimes, but it's best just to get a new one from the dealer (USE THE MOTORCRAFT ONE ONLY) as they're cheap.


ok thanks
Text only | Text with Images