We have some 87/88 Turbo Coupe parts for sale that would be expensive to ship:
1 - Complete engine, incl turbo, E6 & all front mounted accessories, hear it run - $400
10 - Rear coil springs - $20/pr
8 - Master cylinders, incl proportioning valve - $40ea
2 - A4LD Automatic trannys, incl torque converters and flexplates - $75 and $50
1 - WC T5 5-sp Conversion (tranny, pedals, xmember, shifter, etc) - $300
1 - WC T5 5-sp (#1352-194-13517) - $150
1 - Engine/EEC wiring harness (complete pass side of car, no EEC) - $50
3 - AC setups including, compressor, condensor, lines, etc - $50ea setup
3 - Sets blue cloth front/rear seats - $75/set
2 - Sets raven cloth front/rear seats - $75/set
12 - Power seat track sets - $25 Driver, $50 Passenger
6 - Dual cooling fan assemblies - $40ea asm
4 - Gray, dk blue, red rear package trays - $20ea
1 - Blue non-sunroof headliner, near perfect - $25
6 - Pair red, dk blue, gray A pillar trim (long plastic pieces) - $10/pr
6 - Pair red, blue, gray rear upper interior panels - $25/pr
5 - Pair red, blue, gray rear lower interior panels - $25/pr
2 - Blue very nice uncracked dashes - $150ea
7 - Pair blue, gray, red door panels - $20/pr, does not incl pockets, armrests, pull handles
6 - Silver, burgandy, dk blue front bumper covers - $50ea to $100ea
9 - Silver, burgandy, dk blue, dk gray, black rear bumpers - $25ea
6 - Burgandy, dk blue, black header panels - $50ea to $125ea
9 - Burgandy, dk blue, black hoods - $75ea to $150ea
1 - Rustfree blk passenger fender - $50
5 - Rustfree driver fenders (assorted colors) - $50ea
2 - Rustfree gray, blk trunk lids - $50ea
1 - Rustfree dk blue driver door (missing handle) - $50
12 - Snowflakes, bare - $75/set of 4, incl centers
8 - Snowflakes with good tires, $125/set of 4, incl centers
We will be traveling from Rochester, MN to Columbus, OH and back on the weekend of Sept 8/9. If you need any of the parts listed above and live along the way, we would be happy to load the parts and meet up with you. We are very happy to give quantity discounts! We will also be attending the Jefferson, WI Swap Meet the weekend of Sept 29/30 and can bring parts there. Feel free to PM me with your needs. Thanks.
http://www.madisonclassics.com/car-shows/fall-jefferson.php
Are you gonna be heading through Ft Wayne, IN ?
We don't plan to go thru Fort Wayne, but we will probably be going between Chicago and Indy on I-65 on one of the days. What are you looking for?
the 1 - WC T5 5-sp Conversion (tranny, pedals, xmember, shifter, etc) - $300
and would that be setup for cable clutch or hydro?
Which bell would you like? :-) As it is a TC conversion, it comes with a hydro bell. It doesn't have a clutch disc/pressure plate asm though, you'd have to pick up a new asm. Would you be willing to meet along I-65 somewhere?
i was after a cable clutch conversion. Im converting my 87LX to a 5 speed. And it seemed like a good deal. but I gotta have the cable.
Thanks anyway
Now, If you had a 90GT with 5.0 5speed i'd be alllllll over that
too bad you won't ship. i'd love to get a spare a/c system.
Blackjack, I do have a cable bell out of an 89 2.3 Mustang I could substitute if you wanted. It doesn't have the cable itself, but does have the fork. We've got the 5-speed driveshaft too, which is included. Oh, we do have a sweet running 89 5.0 LX with a 5-speed, but we're sitting on that one for now.
Turboranger, I didn't say I wouldn't ship, I just said the parts would be expensive to ship. I've sent AC setups before. Actually, if you don't need the condensor, the box doesn't have to be too big and would prolly cost around $25-$30 to get to you.
mike, i was wonderin if youve got any good console lids.
if you do, could ya add it to my list, and let me know a price please? ;)
for anyone in indiana:
mike is gonna be stoppin here in indy so i can meet up with him and get some parts. if any of you are interested in parts, and arent right off 65 or 70 between chicago and columbus, feel free to come to indy when he stops here!
I'll say kudos to Mike. He delivered to my house when I couldn't come down to pick up.
Gumby, console lids are getting tougher, especially lids that don't have broken latches. Are all TC owners gorillas or something? lol Anyway, we'll hook you up. Hey, are you still looking for matching trunk locks and glove box locks? I'll bring some along, but I'll have to charge you double what I charged you for the matching ignition/door locks.
Scott (HAVI), thanks for the kudos. It was 634 miles round trip, but everything went smooth. I hope you enjoy the new TC!! It looks pretty good in the picture. Keep me updated on the progress. If you decide to sell the light blue front fenders off your other car, I know a guy in your area looking for some.
Kudos to Scott too. We agreed on a delivery price and he slipped me a few extra bucks for gas which I really appreciated because I underestimated how thirsty my F150 was going to be. Thanks!!
DOUBLE??!!?! thats pretty steep man :rollin:
as far as gorillas in TC's, i dunno about the rest of these guys, but if i was that size id hafta put myself on a diet rather than the car. if youve got a lid with a busted latch, but good bottom and hinge area, i would take that one. the latch we have is good, but the plastic near the hinge is busted. save the lids w/good latches for guys who need em.
i really appreciate your help on these parts, the the free delivery aint bad either ;)
i'm making a trip out to the junkyard this weekend. i'll see if i can pick one up cheaper, but if not, i'll let you know... i'd love to put air back in the ranger.:hick:
turboranger91, thanks for the interest. However, if everyone comes thru on their commitments, the AC setups are all sold, so I hope you find one in the jy.
Any word on the PA guys? I'd love to give those wheels to ya for the seats
Fila, the PA guy doesn't want to drive, so that one fell through. Currently, all of the raven seats are sold, if everyone comes through. We still have one complete set of front/rear blue cloth seats left though, if you would be interested in those. I can also let you know if anyone backs out of a raven deal.
Yeah, if you would please. Raven would look good in my car. Blue would too. But if I do do blue, it will be all blue
I'd be interested in a passenger power seat track... got wiring and the console top+dual seat controls by any chance?
also, how much exactly for a set of matching trunk/glovebox lock set?
booksix, you have a PM.