Went out in the country to pull a 350 out of my brothers camaro to throw into my dads new truck, and looked around and i found a drivers side tail light for vinnie, a carb and coil for fila, and a set of snowflakes, and a set of ten holes.
my dad said i might as well try to sell the ten holes we got, they are 15's and hes got another set of 16 inch snowflakes he said i could sell, and a set of 15 inch turbines, plus what ever else i pull off the black turbo coupe next week.
(http://i31.photobucket.com/albums/c384/boss3512/P1010151-1.jpg)
more to come
Nice ;)
(http://i31.photobucket.com/albums/c384/boss3512/P1010152.jpg)
vinnie there you go one none faded or cracked tail light.
Carb and coil bracket pic lil bro?
(http://i31.photobucket.com/albums/c384/boss3512/P1010153.jpg)
as you wish
carb needs to be pulled apart so i can check and make sure its all in good shape, as of right now the secondarys are jammed open, so if not i know where theres a 650 double pumper sitting
Is that a big ass spreadbore like the one I got from a 460?
(http://i140.photobucket.com/albums/r9/84fila/Fila/000_2110.jpg)
(http://i140.photobucket.com/albums/r9/84fila/Fila/000_2109.jpg)
(http://i140.photobucket.com/albums/r9/84fila/Fila/000_2107.jpg)
I'm kinda intrested in the 650, as I would rebuild it and have alittle fun with it too.
not even close. it will bolt on a 302 my dad said, he said it would be perfect for it the motorcraft one is a 550 he thinks, ill have to find the 650 next week for you
Is it a spread bore ( the butterflus are 2 different sizes) or a square bore ( butterflys are the same size) though. Thats what I need to know
spread i think, i think we have a intake it will bolt to also
Allumnium or Iron? If it's a spreadbore i'll have to say no, as my current intake is a square. I duno, let me figure this out as you find parts lil bro
the 650 double pumper is square
Intrested in the double pumper if it's in ok condition. What about the Motorcraft?
figured you want the 650, my dad said i can sell you them both he dont care, the intake he has is just a stock iron intake and i think its spread bore to match the motorcraft. Didnt get into looking at it today was welding and porting manifolds and putting a clutch on the 350 so we can stick it in the truck.
What would you want for a set of snowflakes or turbines?
well the other set of snowflakes are on the parts cougar, and the turbines are on the my dads t bird. But he wants the turbines gone and the ten holes back on his car, cause the 15's mess up the speedo. the turbines have tires in excelent shape on then, but they need to be worked on bad, they are oxidied, but they have cougar centers! um im guessing since the tires are good 175-150 ish its up to my dad since they are on his car now but i can let you know tomorrow and show you pictures tomorrow
Ok. Tires arent a big deal especially cuz of shipping, but hey they would look good on my car.
yea the shipping is gonna suck..... ill talk to my dad about it tomorrow and let you know
Don't forget the rest on my list you little weasle !!! LOL.
well that was already removed for the other turbo coupe he had and i grabed it cause i knew you wanted it next week im getting my hands on the black car and getting your windows and fog lights and such, and at some point going to the cougar and grabing you the aod shifter
just figured id make sure you knew i found one, and its in good shape too
now i just have to find my note book and start crossing things off
10-4.Remember,if the TC 1/4 windows are dry rotted,don't bother with them.
how can i tell if they are dry rotted? if the gasket is split?