I've been stripping my 87 TC while up here and before I send it to the crusher, do you guys need anything? I obviously already took all the big stuff, body panels, engine/trans/rear, and interior. But do you need any little thing or weird under-body stuff? I'm cutting off the rad support for somebody, got the fuel tank for somebody else, and am pulling the fuel lines for me. Need any structural parts? (NOTE - The passenger side of the car is trashed. It got side-swiped by an 18-wheeler and it crushed the cowl enough to break the windshield and ruined the 1/4 panel, door, fender, etc.) Wiring? Heater box stuff? (EATC car) If you have any requests, please CALL me @ 360-510-3666 TODAY. I'll be farting around with it while John is at work (he's doing a lot better now but his g/f still can't remember anything).
I need the female plug for the radio with preimum sound and the EQ. Male and female plug from the radio harness would be nice if you could Mike
I'll grab it.
Thanks Mike!
What shape are the 1/4 windows in?
Excellent :D
They're going on Layla :p
I got the wiring for Mikey and a ton of other stuff. All that's left of value is the full front suspension (except an 19-wheeler hit it so it's all screwed up. Bent K-member and all) and the master cylinder (bad and has 210,000 miles on it. Brakes didn't work at all when I got the car and all of the lights were on). Everything else is either in my truck's bed, John's garage, or is called "uni-body".
I need some really nice 1/4 windows.
Vinnie, if you need really nice 1/4 windows, join the club. The name of the club is "Everybody".
Hey,I'm glad to be a member.LOL.
how bad do you want them vin?
did ya grab the fuel pump hanger and fuel level?
Yep. :D
How much for the wiring Mike?
there definitely a few quarter window for sale on nato!!! if your interested~
I can get 1/4 Windows fron an 86 if need be
Which wiring?
83-86 1/4 windows aren't a problem. The 87-88 1/4 windows rubber is molded on and deteriorates over time. I've restored a set but it's labor intensive.
i think the quarter windows on my 88 are good, the ones that were on the white parts car died, i tryed to see if they were bb proof, which they are not.
ROFL. :2gunsfiri
it was a accident really, the birds were flying around and i had a brand new Co2 bb pistol, and i was firing away and the window got caught in the crossfire.
sweet how much mike?
Daboss,You keep mentioning this parts car T-Bird over and over,but no action.Are you selling parts from it or not?I need 1/4 windows with black trim,in good shape.
i mention it cause its at my dads, i swear on my life i have it, and im going down in a week or so, ill pull them. and im taking the sway bar and steering wheel for the lincoln, plus the center console and tons of other stuff to sell, plus mustang and 289 and 351w parts possibly
i wont be back for about 5 weeks so, ill see if i can get internet there and show you guys all the cool toys i have there
What condition are the two "Turbo Coupe" door trim pieces in? Better yet, the condition of all the trim pieces on the drivers side?
John, pick a Mike,lol
Daboss,if the TC 1/4 window trim is in good shape,pull both windows and I'll buy them.You have unbolt them from the inside first.Be careful with them.
ok im stripping anything and everything thats good in my eyes so ill grab them for ya
Thankyou very much.
np ill give them to ya cheap what ever i sell off it goes towards my lincoln, so it will all be priced to sell!
Destroying Such A Rare Classic?! How Dare You?!
;)
Just give me a PM when you get them.
$40 shipped for the hanger and level. They are still good.
As for stripping a rare classic, it got hit by a Mack truck. A MACK TRUCK! :hick: I've actually owned this car for 2.5 years because I couldn't bring myself to strip it. (My favorite TC color) This is the first one I've actually been sad about. (The A-pillar was pushed in so far it trashed the windshield and BENT the K-member) :(
DMC,
The trim is great. I can post pics in a day or so.