I am now starting to strip my Sport (Oxford White/Shadow Blue cloth). I bought it a few months a few for cheap out of a guys yard (it was stuck on a rock). It has been jumped/hit/something bad and has severe uni-body damage. The passenger door area is intruded almost 5". The car is physically bent (driver's side is 105" wheelbase, passenger is 104.5") and is not fixable. The passenger 1/4 is wrinkled and the control arm boxes are punched through. Sad, sad, sad story but I will be stripping every last nut, bolt, and screw. Since I only have about $350 in this car, everything is going CHEAP. Basically make it worth my time and it's yours. Prices do NOT include shipping. Make offers on PACKAGE deals. I plan on being done by August 1st so buy it all quick, and cheap. I have over 30 pics available right now, and can take pics of any SPECIFIC items. Here's a few:
headlights - $40/pair
outer corner lights - $30/pair
cornering lamps with moldings - $35/pair
front bumper cover - $20 (will not ship)
rear bumper cover - $25 (nice, no cracks)
UNCRACKED dash - $150 firm
a-pillars, rockers, kick panels, c-pillars, misc grills/clips/covers - $5 each
Door panels - $50/pair, complete
rear panels - $10/pair, free with door panels
center console - $50
dash face - $15
radio surround - $15
gauges (Star Wars Digital, work perfect) - $50
trunklid - $30 (rust free)
1/4 windows - $10 each
NON lit c-pillar panels - $20/pair
new looking alternator - $10
front plate bracket - $25
ALL other parts available. Please post, PM, or email with needs.
SOLD (payed for, shipped, and gone)
Front and rear swaybars (TC sized :hick: )
driver's side seatbelt and buckle
General pics
Ok so your gonna get me shipping prices on those fuel lines so i can get the money out to you asap right? Im done with school Wednesday and i need stuff to do!
whats the steering wheel look like on the sport as opposed to the TC
Last 3 for now. If you would like a specific pic please ask. The car is LOADED. Power mirrors, locks, windows, dual seats, power recline, EATC, auto-dim, etc, etc and it all works. A/C supposedly worked and blew ice cold. It does not start but it will turn over. It has air, fuel, spark, and the timing is dead-nuts. I replaced the ECM with one from Vinnie but no dice. Tranny is supposedly good as well. Rear is a 8.8" 2.73 trac-loc with the 10" drums.
daboss has claimed the fuel lines and I will be pulling them tomorrow (if it doesn't rain before my final).
Price check - Isle 3
Driver's side A-pillar molding
Driver's side quarter window chrome molding
you rock man!!
JeremyB - It's a Sport, the window trim is black :hick:
are the mirrors manual or power?
ALL interior screws. Not even sure what you would charge but I'm missing alot for mine.
sent PM
Mike,what condition are the rear side windows in?I need a pair that aren't totally dry rotted.
Vinnie,
They're dry rotted. They are super easy to restore though. Maybe I need to do another "How To" thread?
Lay the resto tip on me for those windows.I'm all ears.I need to know so I can do them before saturday.thanks.
Do you have a pic of the radio?
Here you go.
How is the rear "windshield" trim? Is it the kinda that is bonded to the glass?
It's the multi-piece metal.
Is there a way to install it on a car without the multi piece?
I did once, about 7 years ago :hick: I think you need the 4 "clips" and I can't remember if the rear window had to come out or not.
Well I have to take my window out anyway to re-seal it cause its only held in by silicone in the top corners and besides I am repainting the car. How much for the trim and clips, if possible? My zip code is 16365. Thanks
how much do you want for the Upper Intake 5.0 EFI plaque? Is it in good shape with the paint not chipping off like crazy (like mine:hick: ) ?
hey mike you got a fuel pump hanger and a fuel leval float? The fuel pump hanger doesn't need to have a pump hooked to it. My pump is good but the hanger is shot. Rusted beond repair. same with the fuel float. i touched that thing lighly and it just fell apart! But the tank size is a 20 gallon. not sure if thats relevant or not.
88sportcoupe - $75 shipped for all the trim and the clips. It will be a long box :D
ZondaC12 - $10 shipped. I have no idea how it is compared to yours but it looks decent?
Cougar8775 - If it's not bad in this one I'll sell it. This car has the full star wars gauges so you'll have to ask Eric if the float will work.
got my fuel lines out? i hate to be an annoying , but im anxious!
Mike, can I get all the int screws from the car. All from the dash and console area atleast. I'm missing alot of mine
daboss - Nope :(
Mikey - Sure. I'll save em all in a baggy and send them to you for $10.
ok just pm me when you do so i can get shipping fees and the 20 out to you
Cool thang man. Let me know when your done parting it, I'll pick off that bag of goodness. Replied to your PM by the way
well im using my gas gage that came in the cougar but also i don't know if the fuel leval got damaged when the gas tank got crushed. but i know the fuel sender is shot.
I'll get it when I drop the tank for dabosses fuel line pull when I get home.
three cheers for mike!!!
Stupid truck :(
It'll be another couple of days, but I'll probably pull the lines during a truck "break".
Come on peoples, I need the $$$ to fix my truck now!!!
would the power door lock motors work in an 84 t-bird.is so i would be interested.
I dunno, I think so?
Floor shifter? Just need the handle but will buy the whole assembly.
Kickdown cable if intact and car was floor shifter.
I have the complete floor shift assembly.
$100 plus shipping. With all cables/brackets/whatever.
You said it had like 130k miles or so? How's the motor run, if at all? What would you make of a day pulling the rear off and throwing on my car (no way of transporting parts or installing it down here unless I get my dad to drive down and pick it up...would install in Federal Way)? I have no idea how hard it is to swap the rears, but I know you have plenty of experience with pulling them.
Did this car have teh 10" drums on it or was that just the 88 XR7's? I may be looking for a 10" drum setup soon and I'm pricing finding one
It sounds like it got a towing package, so 10" drums likely. Complete rear is MINE though (8.8 w/2.73s)! :p
Seek,
I'd pull it, but no way am I doing a re-install in the driveway. The last car I took the rear out of I had to cut the uppers in half.
The motor does not run, and I have no idea why/why not.
And yes, it has the 10" rear brakes...
Nevermind if seek is taking the WHOLE rear
Thats fine, I'll see about getting my dad down there or something. How much for the entire thing? I'll try to pull together some cash, since that thing "should" swap in almost problem free in an afternoon.
Worse comes to worse, I'll have to find a TC rear between Olympia and Seattle and deal with the new brakes.
Yeah, my 7.5 howls louder than any other road/wind noise. I don't think it'll last too much longer.
Good luck with it. I want it you need it. You win:shakeass:
He mentioned it having the 8.8" rear 2 weeks ago when I was up at his place, it peaked my interest then. Depending on if I can get my dad to drive down (110 miles each way, not many but still a few) to bring it to his house, then I'll likely get it. Otherwise, I'm not sure...I'm sure Michael would pull any brake parts.
Can't get a hold of my dad right at the moment, so not sure how this will turn out.
I'm more pricing it then anything at this point. I have brand new 9" stuff on my car, which is what I will be swapping. But if I can get 10" stuff I may do that. You have first pick man
$150 complete brake drum to brake drum. I don't even want to mess with pulling brakes and whatnot. I want everything off of this car sold fast and cheap.
Okay, give me some time to get in touch with my dad, I'll see what I can do and when. I think he gets like 20mpg highway with his Silverado Turbo Diesel so gas won't be *too *bad...truck weighs 11,000 lbs though! Lots of tools in the rear compartments.
Alright, picking up the rear for sure, and I'm going to find out if he wants the motor. FINALLY, after all these years (car's been in family since 91, rear end has made noise since then, just slowly getting louder and louder) I can have a quiet ride.
and this will give me a chance to check them bolts down there (we put new ujoints in 2 years ago)...in reference to the other thread of loosening bolts.
Friday evening sound good? I'll get a specific time, but it may not be 100% accurate since he has to commute from Seattle after work (he finishes around 3-4 I think). It really depends where his job is at on Friday. I'll be meeting up with him there, then driving back to Seattle to install on Saturday (I only have basic tools here, he has everything, plus some)
If you need more time, let me know. Its either next weekend or the following, then two weeks of no possibility. He's going to pass on the motor, since he only wants to find a core.
How is the center cap on the steering wheel? My tbird symbol came off and I could use another one. I could use a lot more misc. parts, but for right now I want the cap in good condition. I'll get back to you soon about more stuff i may need before you ship.
Symbol came off? Aren't they etched INTO the cap? I'd have to look at my sport steering wheel though, haven't used it in years. I think he has an intact steering wheel though, still mounted.
amooset,
It's good.
Seek,
On the Sport it has an "emblem" in the cap. Friday works fine.
Mike, reminds me, I need a sterring wheel horn cover thing with a bird emblem on it. I thik it's an 88 wheel with a cougar emblem. I can get a pic if you need, but I hope you understand what I'm asking
Pic needed, too many horn buttons to know.
Will do
The horn button is what I'm talking about in this case, not just the bird emblem. It looks like i have the same one as pictured, you just cut off the horn button in the picture so I couldn't tell if it was any good.
If Cougarcragar doesn't mind me using it:
(http://www.foxtbirdcougarforums.com/attachment.php?attachmentid=12073&stc=1&d=1184013822)
amooset,
It's good.
Mikey,
That's a TC steering wheel.
I ned that style of botton though, in black
Mike, I've got a strange part request and if you don't wanna bother with it, no problem. Wondering if you had the bracket necessary to use the floor shifter on the AOD. I have a shifter, plate, and cable, but no means of attaching it to the trans.
I'm keeping my floor shift setup complete, sorry :D
Mikey,
Don't have any TC ones without the whole wheel.
do you have a radiator overflow bottle because im interested in that....
bracket for a floor shifter would one from a 88 xr7 work???
Hey mike... is flyer still insterested in the drivers side window motor? if not let me know on a price as well as the door panels(i think these are the ones u are talkin about in pm) and the power window switch. i could pick them up at the PIR meet in first week of august. id be intrested in the dash pad as well but i dont even know how to remove mine... let me dwell on the dash pad itself but the door panels, window switch and drivers side window motor im intrested in
How does the metal trim piece on the bottom of the front windshield look?
420ttam420 - Yes. $25 shipped.
daboss351 - Sorry, I am not separating out this floorshift.
intimidator - PM me.
V8Demon - Needs paint, but it's straight and corrosion-free.
i know your not but i am ahaha sorry ill just pm him about it lol
then stay out of his thread then
is the dash dark blue or dark grey?
Dark Shadow Blue.
Pics for a few PM's.
do you still have that dash board?
I do. Are you ready for it?
Have any idea on how much it would cost to ship the gauge surround and the radio/eq/heater surround?
About $20 DHL Insured ;)
Lol I worked for DHL, we used to throw boxes around like nothing. Have any pics?
Here you go.
Is that NO system sentry? Didn't notice that. Odd car.
Oh I thought it was the brushed steel look, thats what a wanted, thanks for the pitures though.
Ummm, that IS the artificial brushed metal pieces? If you want the real thing, you'll have to design it yourself.
I was in a T-Bird the other day and it had more of a aluminum look to it. I was going to get it but it didn't have the console.
it looks more aluminum in person.
its the glare from the flash
How much for the AOD, how many miles are on it?? I also need the headlight housings, let me see how much i've got left at the end of next week though. Money talks right?? Also, what wheels are on it. Im looking for a set of 15'' wheels, dont really care about the condition just need a winter set.
Oooo, I know, I know! Car has 13x,xxx miles so take your guess on the miles on the aod. Not sure on headlights, but they'd cost as much to ship as they're worth. It has the 14" 8 hole rims as seen on the first page.
oh, oh excuse me for cutting through the first 8 pages of stuff that doesnt make a diffrence to me and asking my question to the person that started the post, if i wanted YOUR opinion i would have asked for it, now, HOW MUCH FOR THE AOD!
The aluminum TBird stuff is what's in the car, same as a TC. I *did* have a consolette version, but it just sold today. The PayPal is pending.
I will, however, sell the console cheap too :hick:
No systems sentry, AND power lumbar. It's a bizarre one for sure.
$100 plus shipping for the AOD and torque convertor. I'm in no rush to sell the engine or trans.
$40 shipped for the headlights with buckets.
Wow, excuse me for trying to answer some questions before Michael got back on the board. I've seen the car in person and have the rear end out of it so I already know the mileage and what rims are/were on the thing. Guess I should stop trying to help.