Text only | Text with Images

Fox T-Bird/Cougar Forums

Technical => Suspension/Steering => Topic started by: BillWert on April 18, 2007, 12:19:50 AM

Title: Alignment specs?
Post by: BillWert on April 18, 2007, 12:19:50 AM
All,
Thanks so much for the answers I've gotten so far. This board has been a life saver in some spots. :)

I'm putting a set of Maximum Motorsports C/C plates in the car, and obviously am going to take it in to get aligned after it's done. However, I can't find any good information on what to ask it to be set to. Anyone have a suggestion?
Title: Alignment specs?
Post by: Dogcharmer on April 18, 2007, 07:30:06 AM
For daily street use... 1/16" toe in, .75 to 1 degree negative camber and 2 to 4 degrees positive castor (I think 4 degrees was the most I could get out of my plates).
Title: Alignment specs?
Post by: slowfoxbird on April 18, 2007, 08:10:40 AM
Mine only go to 4 degrees positive, all the way back.
Title: Alignment specs?
Post by: softtouch on April 20, 2007, 04:46:52 PM
From the '84 Shop Manual:

For T-Bird/Cougar

Caster nominal +1 degree, minimum +1/4 degree, maximum +1 3/4 degee.

Camber nominal +1/4 degree, minimum -1/2 degree, maximum +1 degree.

Toe-in nominal 3/16 in, minimum 1/16 in, maximum 5/16 in.
Text only | Text with Images