I've made it my personal goal to add at least 1 new item a week to ABM.
There will be a new thead every week, and an update to this one.
Week #5 May 7-13
1985-1986 Thunderbird Turbo Coupe, 1983-1986 Cougar "Blue Max"
Replacement RED vinyl for the "wide" bodyside moldings, 50' roll.
$24.99 SHIPPED per set ($5 off if ordered with anything else except decals).
INSTALL Thread (Chrome version) here: http://www.foxtbirdcougarforums.com/showthread.php?p=141578&posted=1#post141578
I'll take one
Past weeks:
Week #1 April 9-15:
1983-1986 Thunderbird, 1983-1984 TC, 1983-1986 Cougar
Replacement chrome vinyl for the "wide" bodyside moldings, 50' roll.
$24.99 SHIPPED per set ($5 off if ordered with anything else except decals).
INSTALL Thread here: http://www.foxtbirdcougarforums.com/showthread.php?p=141578&posted=1#post141578
Week #2 April 16-22:
1987/88 Thunderbird Turbo Coupe Model Kits
100% parts completion guarentee. If your kit is missing any parts, we replace them free.
Original, sealed in factory plastic - $30 plus shipping (8 in stock)
Original, no plastic but 100% complete - $25 plus shipping (3 in stock)
New, sealed in factory plastic - $15 plus shipping (12 in stock)
Week #3 April 23-29:
2.3T Tune-Up Kits
Motorcraft Coil: $49.99
Motorcraft Plug wires: $24.99
NGK TR5 Plugs: $7.99/4 Qty
NGK TR6 Plugs: $7.99/4 Qty (1 heat range colder)
Motorcraft Rotor: $9.99
Motorcraft Cap: $19.99
Motorcraft TFI: $99.99
Motorcraft PIP: $39.99
Motorcraft Air Filter: $8.99
Motorcraft Fuel Filter: $14.99
Week #4 April 30-May 6
Prices do NOT include shipping.
5.0 Tune-Up Parts:
5.0 SO SEFI:
8 NGK Plugs - $15.99
Motorcraft Plug Wires - $47.99
Motorcraft Coil - $49.99
Motorcraft Rotor - $7.99
Motorcraft Cap - $32.99
Motorcraft PIP - $42.99
Motorcraft TFI - $104.99
Motocraft Air Filter - $9.99
Motorcraft Fuel Filter - $12.99
Motorcraft PCV Valve - $7.99
All 87-88 Thunderbird/Cougar INCLUDING Turbo Coupe:
CORRECT NEW Fuel Pump sock - $9.99 (NOT the Mustang one)
NEW Mirror faces - $19.99 EACH (BOTH sides available, should fit 83-86 as well)
1987-1988 Thunderbird Base, LX, and Sport:
NEW Chrome grill - $49.99
NEW Header panel - $199.99
NEW Front bumper cover (polyurethane) - $199.99
1983-1986 Thunderbird Base, elan, FILA, and Turbo Coupe:
NEW Rear bumper cover (polyurethane) - $149.99 (fits Cougar as well)
NEW Chrome Grill - $59.99
NEW Rubber trunk seal - $39.99
1987-1988 Cougar GS, LS, and XR7:
NEW Header panel - $199.99
NEW Rubber trunk seal - $39.99
1983-1986 Cougar GS, LS, and XR7:
NEW Header panel - $199.99
Week #5 May 7-13
1985-1986 Thunderbird Turbo Coupe, 1983-1986 Cougar "Blue Max"
Replacement RED vinyl for the "wide" bodyside moldings, 50' roll.
$24.99 SHIPPED per set ($5 off if ordered with anything else except decals).
INSTALL Thread (Chrome version) here: http://www.foxtbirdcougarforums.com/showthread.php?p=141578&posted=1#post141578
Installed photos...? ;)
I never had much luck "peeling" the old stuff off mine...
Sure :D
You'll have to wait till tomorrow. I'm not even supposed to be "open" today :P
Off to microeconomics class...
OK, Here we go!
First, use a new #11 X-acto knife to remove the old chrome (this piece took me about 2 minutes).
Then sand the area smooth. The nicer you do this, the better it turns out.
Then CLEAN. Use a nice degreaser, followed by some rubbing alcohol on a rag to promote adhesion.
Then lay out your piece, make it extra long and trim to fit.
Push it down real well, going back and forth. This is a LOT easier with the trim on the car. Use a heat gun/blowdrier at LOW setting or a hot day for maximum wrinkle-free ness.
Trim the edges with the X-Acto.
Polish trim piece with Mother's Back-to-Black and call it done. This whole process and this extremely py trim piece in a cold garage took me 10 minutes start to finish. Doing it on an entire car on a warm day will be about 2 hours and would look amazing.
So there you go, ABM's new product of the week! Also, I've decided to UP the quantity to 50' per set, SAME PRICE! :D
Hey that don't look half bad!
I'll be ordering some of that soon.
Any chance on a similar photo demonstration for the 87-88 trim?
Sure! :D
Thanks for the kind words. I do try to "develop" a product fully before I release it. I need to do a center console decal install series as well. Hmmm... back to work!!
Yes,the center console decal.I'm interested in seeing that.
I mean,an installation in progress to finished display.I really want one,I have for some time,but,I am very cautious about stickers/vinyl overlays.
Please see THIS post for istructions on installing our center console decal kits:
http://www.foxtbirdcougarforums.com/showthread.php?t=13502
THANK YOU!
Original - Molded in red so lighter colors are harder to paint, the plastic is very high quality and the casting has little to no flashing. Comes complete with everything you need to make a stock 87/88 TC. The chrome is usually weak. Also optional chrome wheels, and Kobel-style full bodykit and FMS style spoiler included. Usually $15-$45 plus shipping on eBay depending on condition and completion. Open boxes are usually missing pieces.
New - Molded in silver plastic so lighter and non-reddish color cover much better. However the plastic is much, much lower quality. It is very soft and does not react well with serious paints (metalflakes, pearls, etc). The chrome is usually much better if you'd like to keep the wheels chrome. Comes with all of the same pieces as the original plus a small decal set, paint brush, glue, and some paint. Usually $12-$20 plus shipping on eBay.
yea i got one of those new ones from walmart 2 months ago painted it with metal flack came out shiznitty, nice kits though they go together easy
You need one of the original kits to get Metalflake to come out nice.
or paint when the temp in the room is above 50 degrees, this was over christmas break and i was in a hunting cabin lol
How much to ship a new kit to Nova Scotia, Canada (postal code B0N2L0) via USPS airmail? Your prices are pretty close to others I've seen that were located in Canada but I'd rather give you the business. With $15 on the customs form there won't be any duty/taxes anyway :D
Global Priority Mail - Variable Weight (Single) more info about Global Priority Mail - Variable Weight (Single)
4 - 6 Days
$14.75
Airmail Parcel Post more info about Airmail Parcel Post
4 - 10 Days
$15.00
Economy (Surface) Parcel Post more info about Economy (Surface) Parcel Post
(Rate for pieces 5 pounds or less)
4 - 6 Weeks
$16.00
Why is it cheaper to get there faster? USPS is WIERD. I over-estimated the size/weight so figure $14 to ship. It would probably cost the same to ship you 2. (Still only WORTH $15 you know ;) )
Save me one, I'll get it once I have some extra PayPal fundage.
You think USPS is weird? It costs me a dollar more to mail a sequencer to Cape Breton, Nova Scotia than it does to mail one to California. And the one in California is airmail, the Cape Breton one is ground.
If the package is under 500 grams (about a pound) the difference is even greater. For about $6 I can mail a >499 gram parcel to anywhere in USA via airmail (including AK, HI, PR). To mail that same package to Moncton, New Brunswick (a three hour drive from here) costs $11.00. Figure that one out...
LOL. I used to get the USPS rate charts sent to me, now I don't bother. I try to Flat-Rate absolutely everything. I'll stick one in the corner for you.
Ok, PM me your email addy and the total. I've got the fundage :D
$29.75
PayPal ID - sales@aerobirdmotorsports.com
Addy -
106 Balboa Loop
Kelso, WA 98626
If you use a good primer sealer on the body (or any other part) before paint,you can do most anything with the red body.
The red body is the good one ;) I've painted pearls, true metalflakes, chameleons, everything! I use grey primer and then color coat.
I just wanna paint it white/grey, so the red body ain't necessary :D I'll likely paint the snowflakes white as well, as I plan on doing that to my car
got the chrome strip today... wow that was fast from the left coast... thanks :)
No problem at all ;)
Week #3 Added.
to bad the 5.0 ho stuff isn't out yet, i would have bought through you instead.
All 3 weeks together is starting to make the thread confusing. I'm keeping my eye out for the 5.0 stuff.
I'll release the 5.0 stuff early since I waited till the very end of the week for this. I have some much "better" stuff in the works but it just hasn't happened yet.
So I should make a new thread every week?
Now a question about the 5.0 stuff. does this include CFI?
Or one better, carb?
Both :D
Week #4 April 30-May 6
Prices do NOT include shipping.
5.0 Tune-Up Parts:
5.0 SO SEFI:
8 NGK Plugs - $15.99
Motorcraft Plug Wires - $47.99
Motorcraft Coil - $49.99
Motorcraft Rotor - $7.99
Motorcraft Cap - $32.99
Motorcraft PIP - $42.99
Motorcraft TFI - $104.99
Motocraft Air Filter - $9.99
Motorcraft Fuel Filter - $12.99
Motorcraft PCV Valve - $7.99
All 87-88 Thunderbird/Cougar INCLUDING Turbo Coupe:
CORRECT NEW Fuel Pump sock - $9.99 (NOT the Mustang one)
NEW Mirror faces - $19.99 EACH (BOTH sides available, should fit 83-86 as well)
1987-1988 Thunderbird Base, LX, and Sport:
NEW Chrome grill - $49.99
NEW Header panel - $199.99
NEW Front bumper cover (polyurethane) - $199.99
1983-1986 Thunderbird Base, elan, FILA, and Turbo Coupe:
NEW Rear bumper cover (polyurethane) - $149.99 (fits Cougar as well)
NEW Chrome Grill - $59.99
NEW Rubber trunk seal - $39.99
1987-1988 Cougar GS, LS, and XR7:
NEW Header panel - $199.99
NEW Rubber trunk seal - $39.99
1983-1986 Cougar GS, LS, and XR7:
NEW Header panel - $199.99
Week #5 May 7-13
1985-1986 Thunderbird Turbo Coupe, 1983-1986 Cougar "Blue Max"
Replacement RED vinyl for the "wide" bodyside moldings, 50' roll.
$24.99 SHIPPED per set ($5 off if ordered with anything else except decals).
INSTALL Thread (Chrome version) here: http://www.foxtbirdcougarforums.com/showthread.php?p=141578&posted=1#post141578