Print Page - need MAF set up!!

Title: need MAF set up!!
Post by: quicksilver on March 16, 2007, 10:20:21 PM

i need the sensor,wiring and computer.

Title: need MAF set up!!
Post by: Kitz Kat on March 17, 2007, 01:45:26 PM

For what ,Ho?

Title: need MAF set up!!
Post by: quicksilver on March 17, 2007, 02:11:23 PM

yeah, im trying to convert to HO, with GT40P heads so i need a MAF unit.

Title: need MAF set up!!
Post by: Kitz Kat on March 17, 2007, 02:42:08 PM

I got a linc computer,probably a stock stang MA.
The wires cut some off of somethin.If needed.
Shiipping price+ 10.00.

Title: need MAF set up!!
Post by: quicksilver on March 17, 2007, 03:25:51 PM

so you have a MAF computer, but the wires are cut?

Title: need MAF set up!!
Post by: Kitz Kat on March 18, 2007, 05:32:03 AM

no I ment cut the wires from a maf to make the conversion.

Title: need MAF set up!!
Post by: quicksilver on March 18, 2007, 12:01:31 PM

so you only have a computer?
well, i dont know what kind of wires i need? like do i need the whole wiring harness, even the ejector harness?

Title: need MAF set up!!
Post by: Kitz Kat on March 18, 2007, 02:06:59 PM

Not if you got a 5.0 now,you just need the maf plug and a few inches of the wire thats on it,then run the wires to computer.then change the firing order.

Title: need MAF set up!!
Post by: kewlcoug on March 18, 2007, 02:26:03 PM

I have an extra MAF wiring harness if you want it. It's kinda chewed up since I used it for awhile, and the length isn't right (it just barely reached my CPU) but if you're just lookin for the plug and are gonna be cuttin the wires up anyway, this would work fine. They sell 'em for like 75 bucks new, but you can have this one for $15 if you want. Lemme know,
Jason

Title: need MAF set up!!
Post by: quicksilver on March 19, 2007, 11:51:30 AM

haha, im looking for a harness thati can use (no cutting)
can i have a pic of this wiring harness?

Fox T-Bird/Cougar Forums

Marketplace => T-Bird/Cougar Parts & Cars WANTED => Topic started by: quicksilver on March 16, 2007, 10:20:21 PM