For sale is box-style intake that I fabbed up a little while ago for my car...since then bills have not allowed me to buy the s/c I wanted to go with this pig. The lower intake is a stock 5.0 FI truck lower(similar to Holley Systemax and vortech) and the upper plenum is a clean sheet design of my own. The upper plenum is made from 1/4" aluminum plate fully heli-arc welded and pressure tested in excess of 15psi. The runners on the upper plenum are approximately 2" in length compared to the non-existent runners on mass produced aftermarket box-style intakes. There is no provision for EGR on the upper plenum but the intake tube is long enough to put the T/B in the proper location...will accept up to a 90mm T/B. The lower intake was port matched to the upper but port matching to the buyers heads is highly recommended for best performance. Necessary vaccum tree and PCV elbow included.
I would recommend this intake for forced induction, strokers, and high-winding nitrous applications. Intake is painted ford industial blue. Asking price is $500o/b/o. Good luck finding another box style intake to fit the free flowing truck lower intake for less than what I'm asking for both. PM me for a pic if interested...please don't bust my balls, I'm not going to give this away.
Thanks,
Don
When I first made this intake everybody was asking me if I would sell it or make them one...now nobody wants it? Good thing I didn't make more...lol. C'mon guys, one off intake for a good price...what gives?! Make me an offer!