Fox T-Bird/Cougar Forums

I'am down to 1 remote and the case is cracked .The number on the back is goh m24 does anybody where to get a replacement?It's for 97 :cougarsmily: with a v6

Your local ford dealer They can program it also

Check ebay or do a google search for key fobs or something similar. I did this after we purchased our explorer because we did get any remotes with it. There is a place (do remember the name) that sells the geuine Ford remotes.

Ive got a couple new ones I bought and never used, I will check and see if they are the same.  You can program them yourself.

Thanks all.I found a place online 50 bucks .

Sam I sent you a pm

I need some input.I brought 2 new remotes and they gave me detailed instructions.
I can't get the to alarm cycle to program the new remotes.There a led light on the dash it says hold the light for 20 seconds to start the process any ideas?

I can't speak about keyfobs but I've programmed enough home remotes to realize that although the self program functions might be easier or more accurate, I  question accurate, but doing it manually is by far faster! It might take a little practice to get the process down. Push button 15 sec look closely remote blinks then go to next instruction step. Mess up, remove battery, start over. It's a process.