Print Page - getting ready for h.o conversion

Title: getting ready for h.o conversion
Post by: 87 cougar aniv on March 07, 2007, 01:37:28 PM

I have a Lunati cam part #51099 specs -rrn1-292-510-114 will this work with the so block with e7 heads?

Title: getting ready for h.o conversion
Post by: 86elan on March 07, 2007, 07:26:49 PM

With the SO flat top pistons you will probably have interference with the valves with that much lift. You didn't say what the duration was. Just get a HO cam, those cams can support more hp than a guy would think. Plus, Ive heard that the SO flat tops can't take much more lift than the HO cam has anyways.

Title: getting ready for h.o conversion
Post by: Kitz Kat on March 07, 2007, 07:37:05 PM

The 510 might be a problem with flat tops.Your pushin the limits.

Fox T-Bird/Cougar Forums

Technical => Engine Tech => Topic started by: 87 cougar aniv on March 07, 2007, 01:37:28 PM