Fox T-Bird/Cougar Forums

Technical => Engine Swapping => Topic started by: 87fordboy on March 01, 2007, 12:07:34 AM

Title: 302 Swap So-Far (w/ pics)
Post by: 87fordboy on March 01, 2007, 12:07:34 AM
ok so as alot of you know i bought a 302 rollerblock for my fox and this is what i have so far

The Block right after i got bored out .30 over
(http://i118.photobucket.com/albums/o97/87fordboy/DSC00433.jpg)

Edelbrock Torker II Intake Manifold
(http://i118.photobucket.com/albums/o97/87fordboy/DSC00467.jpg)

Edelbrock 600CFM
(http://i118.photobucket.com/albums/o97/87fordboy/DSC00471.jpg)

things that are not pictured are the: Ported E7 Cylinder Heads and Hyperteutic Pistons and Ford Racing Rods. I have and E303 Cam that i am about to order. lmk how im doin yall so far i have spent not that much money on this project. probably in the ballpark of 350.00
Title: 302 Swap So-Far (w/ pics)
Post by: 88BlueBird on March 06, 2007, 12:59:19 PM
Looks good. When are you going to start assemblying every thing?  Don't let the bores rust in that engine block.
Title: 302 Swap So-Far (w/ pics)
Post by: 87fordboy on March 10, 2007, 08:57:37 AM
thanks 88bluebird, i want to have it in by may but if not in may then b4 november so i can take it down to the daytona rod run... and i spray the block down every week with WD-40 to keep it from rusting
Title: 302 Swap So-Far (w/ pics)
Post by: 87fordboy on March 20, 2007, 09:48:11 PM
WOOOOO!!!!! All the low end parts are coming this weekend from summit!!!
Title: 302 Swap So-Far (w/ pics)
Post by: vinnietbird on March 20, 2007, 10:33:56 PM
Keep us posted.It feels good to get parts.better than Christmas.