I thought I saw a thread on rear swaybar sizes but I cant find it now.
Is this correct:
My 86TC has a 1 1/16 rear sway bar.
I have a 96 Mustang GT bar, it looks like it is 1 3/16ish, it may be metric, but my calipers read out in 32s.
Rear bars are not that big.
Stock Tbird ones are 19-21mm.
SN-95 V8 Mustang ones are in the neighborhood of 24-27mm.
OK, so I need to learn how to read my own calipers. Upon further review it looks like 13/16 for the TC bar and 15/16 for the 96 GT bar, give or take 1/32 because I think the measurements are actually metric.
I was going to swap out the TC bar for the GT bar, but for a DD I dont see that it will make any difference as they are pretty close in size.
Hehe.
Yes, the measurements are metric.
You may notice a little difference with the larger bar, but since I don't think you increased your front roll stiffness any, it's kind of a toss-up.