Hey, everyone. Im looking into getting a mm kmember for my 87 tbird and would like to know if anyone has any pictures of one installed on our cars. I would like to see a side shot of how it lines up with the frame rails. Are spacers necessary?
I've got one installed in my 86. I didn't install it so I wont be able to answer any installation questions. But if I find some time I can pull a wheel off this weekend and take some pictures.
That would be great! Thanks!
There are several pics of folks who have installed the Mustang K-members in the Tbirds/Cougars.
The rear mounting points will need to be modified (not the same between the Mustang and the Tbird) and IIRC spacers are needed where it attaches to the frame in the front. 3/8" sounds familiar.
yup, should be pretty universal between brands. 3/8" is what i needed.
(http://i25.photobucket.com/albums/c73/gmby23/87%20turbocoupe/DSC00006.jpg)
Is there a place to buy these spacers or should i just make some in the drill press with some 3/8" flat stock.
Try Home Depot, Lowes or Ace Hardware...
Looks like they stacked washers to shim mine up... Simple and effective.
cool, thanks alot everyone!