i have a bunch 2.3t parts
1: 84 2.3t motor 125,xxx miles complete $400
2: t-3 turbo 60/48 spins freely $150obo
3: t-3 turbo 60/63 spins freely $200obo
4: 3inch downpipe $100obo
5: volvo fmic w/piping $75obo
6: posi third member w/3:55 ring&pinion $125obo
7: clutch& pressure plate both nib&flywheel $250
8:set of snowflakes w/tires decent tread $300obo
9: ranger roller cam w/ followers very low miles $50obo
10:e6 maniford $30
11:probe&saab fmic $30 each
i know im forgetin a bunch of parts so if there is something u need let me know
im located in the stl zipcode 63135 if that helps anyone
It might be a good idea to tell folks where you are.....
he said in his other post that he is from St Louis, Missouri
More info on #5 please... Is it for a stock intake setup? By you saying it has piping w/ it, is it drop-in with clamps and couplers...?
Frank M.
Would like to get pics w/dimensions for the intercoolers if its not too much trouble.
Scott
I could care less about what he said in his other post.
If you're going to list something for sale and you haven't taken the time to fill out your profile....LIST WHERE THE PARTS ARE...especially if you are a new member to the board. Not evenyone reads every single post and knows who where everyone is from.
Simple curtesy and will help you with your sale.
yes its for a stock intake ,it sits in front of the radiator so u might have to get a different fan depends on your turbo if it drops right in
i had a t-3 and i grindrd my housing round now dont get me wrong the piping aint pretty but it worked great no leaks what so ever
all couplers are there ill try to round up some clamps
pm'ed you
How come every time I tell myself that the IHI is "good enough" T-3's pop up all over the place. =/
Free bump.
ttt