I'm in Columbus, GA. I've got a lot of stuff I need to get rid of. I'm storing what I can, but the car goes to the crusher tomorrow. If there is anything you need, let me know so I can pull it before it goes. The base car is an '87 Sport Coupe. It's got an '84 model header/bumper/bumper cover. Fenders, hood, door, trunk, all glass, tube k-member, flaming river rack, 3.73 TC disc rear, complete ABS, MK7 calipers, TC snowflake rims, mustang X pipe, double hump x member, solid trans mount, 2.25 cat-back. Blue leather interior in very good condition. Blue trim pieces. Grey trim pieces. TC door panels. Stock door panels. Full digital dash. TC buttstuffog dash. Lots of small, usually forgotten parts. I'll sell most of it cheap. Anything you need, let me know. I've also got lots of small parts for a 5.0 HO, and most of a TC engine and turbo. Thanks, and please let me know fast!
xcutnr1@hotmail.com
Thomas Stone
706-593-3954
if its a floor shifter i need
THE shifter
and the shifter cable
please let me know i realy need this
how much for the k-member and the rack? shipped
X pipe, Grey trim stuff to 44408?
light grey? looking for rear upper sail panels.
This is most of the big stuff. Some of this will just end up in the crusher if noone wants it. I'd rather see it go to someone who can improve their car with it.
clock
manual a/c controls
quarter glasses
3 glove boxes
doors
door panels
trunk
fuel door
fuel tank from a TC (shallower, doesn't show under car)
rear bumper cover
3rd brake light
2 rear deck covers
stock speakers
tbird emblems from behind the quarter glass
e brake cables from TC
front fenders
hood
header panel, fog lights, bumper, and cover from '84 TC
energy suspension sway bar end links, new, installed
ABS from TC
AJE Y2K Member, new, installed
flaming river steering rack with solid steering shaft
MK7 front calipers, almost new
double hump cross member
MAC x pipe
solid trans mount
2.25" cat back exhaust
3.73 TC disc rear end
snowflake rims
driver's side blue leather seat with power base (worn)
complete set of blue leather seats all in very good condition (driver's has some very minor wear
MAC Equal length shorty headers
Pro M 75mm mass air meter
mass air conversion harness, new
24 lb injectors
19 lb injectors
'89 Mustang GT computer, reman
MSD Blaster 3 coil
starter relay
2 dash bezels
full digital cluster
TC buttstuffog cluster (can set tach for V8 if you want)
5.0 distributor
'87 Thunderbird owner's manual
2 sets of door speaker grills
rear spoiler
'98 explorer engine harness
console switch plate
MAC underdrive pulleys
t-bird mud flaps
Intake Air Temp relocator
billet adjustable fuel pressure regulator
130 amp alternator, and manual adjust bracket for serpentine
Black Magic electric fan
Garrett T3 turbo AR60/48, oil and water cooled
130 amp alternator for 4.6L, new in box, without regulator
Anything else that's still stuck to the car that you need. I hate to see it all wasted.
Thomas Stone
Shifter - I have the floor shifter, but no cable. $15 shipped, cheaper if shipping's not that high. Some of the little plastic pieces in the center are broken, and the leather has been stripped off, but it does work. You could have the cable, too, but I'm almost positive I trashed it.
K-member and rack - $450 shipped
X-pipe and grey trim - $125 shipped
upper sail panels - $10, no idea what the shipping would cost, so it's on you
Thomas Stone
MAC x pipe
rear spoiler
Can you give me a price on mudflaps? 18974 oh if you have a pic Vantage08@aol.com
can i get a pic of the flaming river steering shaft?
x pipe and spoiler - $125 shipped
mudflaps - $15 shipped I'll send a pic
Spoiler, Cat back, shorty headers? Shipping to 66901?
I need an email address to send a pic. Are you wanting just the shaft, or the rack and shaft?
jus the steering shaft.
gmby23@hotmail.com
bumper cover for 84 TC to 63135?
what color? any rips or other damage?
send me an email
cougar86_89@yahoo.com
I'm out, someone else can have my stuff.
I'm out, someone else can have my parts
im out as well. thanks for the pic.
BTW, I am just guessing at most of this shipping. Why is it that everyone wants a price including shipping anyway? $60 + ship for the X-pipe. $15 + ship for the spoiler. $20 + ship for the grey trim. Whatever that works out to. If you're still interested, let me know.
Thomas Stone
i would also like a pic of the rack, steering shaft, and k-member.
thundercoupe80@yahoo.com
How much for the exploer wiring harness? Is it for a V8?
Do you have the computer and how much of the harness do you have?
Shipped to 42303
THanks
quarter emblems... how much?
Can you send pics of the blue leather seats? Driver and passenger?
how old is the x pipe off road ?? what size and how much for solid trans mount
i wan the rear end but were do u live?
more pics sent
XJEFFS, I need an email address to send you pics.
Explorer harness is for a V8, no computer. It is the complete engine harness from bulkhead connector to all sensors - $18 shipped
Quarter emblems - $10 shipped
Mac 2.5" offroad X-pipe is about 4 years old, but has been stored for about 3.5 years
Trans mount is Morosso - $18 shipped
Once again, I am in Columbus, GA. Fenders, doors, hood, etc will go with the car today unless someone calls me. I'll be storing everything that I can, but I have a limited space.
Thomas Stone
xcutnr1@hotmail.com
706-593-3954
I'll have my phone on me for any last minute rescue needs. Also, feel free to make offers on stuff. It all has to go soon, and if noone else is wanting it, you might get it for cheap. Anything I've already been asked for will be pulled, anything else, call me ASAP. I'm leaving now for the crusher, pulling parts, then coming back with a truck load of parts.
tuck those emblems aside I'll be after them soon...
Does the 89 mustang GT computer work? If it does how much shipped to 17315?
ECM $70 shipped - guaranteed to work
need a mass air conversion harness, 24lb injectors, and a pro-M set for them, a cold air elbow, and filter? everything for $225 shipped
BTW, this is no longer a parting today, crushing tomorrow. If you are needing anything, just ask, and I'll let you know if I have it. Thanks to everyone who has replied.
Thomas Stone
xcutnr1@hotmail.com
706-593-3954
can you send me pics of spoiler?
I need an email address to send pics. OOPS! got it, sorry.
Thanks.
Spoiler. Consider it sold, I want it.
did you get a chance to send me pics yet?
I thought I had already sent them. Sorry, guess I missed it.
Thomas Stone
DId u get my message about the mudflaps
price on the owners manual shipped ontario l4g 5w5 thanks twister
twister,
I'll have to check on shipping. $5 plus shipping, probably not much.
Also, anyone else, please email me, as I don't get to check the board too often.
Thomas Stone
xcutnr1@hotmail.com
If you do check the board, I passively need a H.O. roller cam, or that 2.25 cat back would be nice. If you have either one (I know one is not listed) a close guess as far as price goes would be awsome. Oh and in about a week time frame as far as payment.
If you still have these:
1) Fuel Level Sender for Digital Cluster (MUST work. No dead spots! I am going crazy finding one to complete my conversion...)
2) MAC pullies
3) Bottom weather strips (Inside and Outside) for both door windows, must be suple & all black
4) Digital Cluster (as a spare)
Part price is good for now, can worry about shipping cost to SE Michigan later. You can send pics and prices to finance@cougarclub.org
Peace!
vantage08, email me?
I do have the 2.25 cat-back, but don't think I really want to bother with trying to ship it. It's all one piece, and still on the car, which did not get crushed BTW. Anyone want to bid on ebay? http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=280049512018&ssPageName=STRK:MESE:IT&ih=018
I have the Mac underdrives $25
Weatherstrips $5 if they are good
digital cluster $25
email me if you're interested. I'm getting ready to list more of this stuff on ebay.
xcutnr1@hotmail.com
Do you still have the 130 amp alternator, and manual adjust bracket for serpentine
I need a set of ocks,the one for the trunk,and the one for the glove box with the key.